The dreaded map loader error

Hi,
I've just gotten a new N95 8GB and am trying to download some maps to my phone. I have run the maps application on the phone and successfully connected the phone via USB in data transfer mode. The problem is I am getting the following error:
"An unexpected error occurred. Try again. Sorry for the inconvenience."
I've searched everywhere for a solution but without any luck. Sompe people reported proxy/firewall issues but I am running from a home connection and even moved my PC coonected to my phone into the DMZ without luck.
Has anyone been able to solve this problem or should I give up and keep what is left of my hair on my head?
grantonstar

I've been trying to get the maps via Nokia Map Loader 1.2.1. I just installed .net framework 3.0 and reinstalled with no luck either.
I've been using it with my home wifi connection but I want to be able to download a whole country so the map data is there for when I go out. Unless there is a way to pre-get a region or country direct from the phone?

Similar Messages

Map loader / error loading catalog

Hi there,
i have a problem with the "map loader" and my Nokia 5800 XM.
... the map loader worked as i bought the phone some months ago. Everything worked fine. Today i had to do a reset. The map is still working, but i cant get the map loader to work.
After the start of the program and sync with the 5800 XM im getting an errormsg (in german but im trying to translate).. "cannot load the catalog of the 5800 xm"
Thats it. I googled whole day, but found no solution... so this forum is my last help right now.
It worked (today) before i have done the reset so im thinking that its not my OS (Windows7 64bit).
thx in advance
Murt

one more thing.. i have updated the FW today to the newest available. 50.0.005
found also another thread here /t5/Maps-Navigation-and-GPS/Map-Loader-error-while-loading-catalogue/td-p/624895/page/2
might be an FW problem then?

Nokia Map Loader Error in connection

Hi Guys,
I have an N80 and have the MAPS software installed on my phone and the Nokia Map Loader software on my Laptop. However, in order for me to download the maps I have to connect my N80 to my laptop in Data Transfer Mode and then run Nokia Map Loader. This should then allow me to download the Maps. I get an error when connecting to my laptop in Data Transfer Mode. It just says Invalid usb connection or something like that. No I don't think it is the maps software but I would like to know if any of you had the same problem before and how it can be resolved. I sent a note to Nokia Tech team to see if they know but it takes a while for them to get back to you.
So, does anybody know how I can get past this or get the MAPS downloaded?
Any advice would be greatly appreciated.
Cheers

can´t connect nokia map loader, error, won´t work?
I had this same problem, found your post looking for an answer (lol), and I just SOLVED the problem ; )
First, you don´t connect in data transfer mode. You must use pc suite mode, or it won´t work.
Second, (and this is the tricky part), YOU HAVE TO INSTALL nokia maps on your smartphone (so far ok, we all know this), but then you have to RUN THE PROGRAM ONCE.
Don´t ask me why, but if you just install nokia maps, then try to connect with nokia map loader, it won´t work. You have to install the program then run it once. Exit the program, then connect to you pc (nokia map loader) with pc suite mode.
BTW, do NOT install nokia maps on your smartphone on the phone memory. ALWAYS USE THE CARD MEMORY, install nokia maps on your memory card, because the maps are so huge. Most phones won´t have enough internal space.
So this is it, no more suffering. Damn, I´m good ; )
Message Edited by unsterblich on 17-Jan-2009 03:54 PM

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

N82 map loader error...PLZ HELP!!!

I' have a problem with my map loader and I hope someone can help me. When I try to open map loader on my PC it gives me an error saying:
'' unhandled exception has occured in a component in yr application. If u click continue the application will ignore his error error and attempt to continue.
Font 'Tahoma' does not support style 'Regular' ''
What I supposed to do? How can I change that font thing? Please help...
thank you....

Hi theog
In "Add or Remove Programs" do you have "Microsoft .NET Framework 2.0" or later?
Do you see "Tahoma" listed under the Fonts folder which is under the WINDOWS folder?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Map Loader error while loading catalogue

XM 5800, latest firmware, Maps 3 installed and working OK. I get "Error while loading catalogue for Nokia 5800 XpressMusic" whenever I start Map Loader 3.
Uninstalled/reinstalled Map Loader 3 several times.
Tried suggested fixes of deleting qf and cities folder then running Maps to recreate file structure.
Tried it on a Windows 7 PC with PC Suite and also a Vista PC with Ovi Suite. Same error message.
I am left without the ability to download any maps except over the air as I go incurring data charges.
So I may as well just use Google maps!
I see in the discussion groups this issue comes up for many different Nokia phones occasionally but I have never seen a solution.
Anyone?
Solved!
Go to Solution.

Just when I thought Nokia Care technical support knew what they were doing!!!!
About 4pm NZ time yesterday, after the Map Loader server had been working for about 3 to 4 hours and everything was fine. I got a call from Nokia tech support. I was on the other line so they left a message.
"Sorry, its not going to work because map loader is not completely compatible with Windows 7"
and my email support thread finally pointed me to a "Solution" discussion board entry detailing a fix for Maps 2. You had to download the latest version of Map Loader 2.02!!!!! That was really helpful considering we are on 3.03 and 3.0.28 respectively
So it all stating to work again may have just been coincidence and nothing to do with our support calls! :-<
Oh well at least its working. Now all I have to fix is the MTP USB Device driver failing.
Cheers
Brian

Map loader error!Help

Hi,
My phone is N95 8GB.
I have an error when using the map loader.
Below are my detail step.
1.change to "Data transfer mode" , there are message occur "USB data transfer mode activated.Mass memory may not be used during this time." Is it correct?
2.execute Map Loader (v1.2)
there are message occur "An unexpected error occurred.Try again.Sorry for the inconvenient."
Is any one know jow to resolve it???
thanks a lot.

07-Jan-2008 03:04 PM
jamestw wrote:
Hi,
My phone is N95 8GB.
I have an error when using the map loader.
Below are my detail step.
1.change to "Data transfer mode" , there are message occur "USB data transfer mode activated.Mass memory may not be used during this time." Is it correct?
2.execute Map Loader (v1.2)
there are message occur "An unexpected error occurred.Try again.Sorry for the inconvenient."
Is any one know jow to resolve it???
thanks a lot.
Hello jamestw
I can help you with the first question. I can say thats normal. I always get that message, but I have no problem with it.
The other qestin might have to do with problems on the map server? Have you tried again? Try re-installing Map Loader!

Map Loader Error

Hello,
i'm trying to use Nokia MapLoader but everytime I start the application i get a the following error:
"An unexpected error occurred. Try again. Sorry for the inconvenience."
my phone model is Nokia N95
please advise...

its definitely a proxy thing
I managed to connect with no problems at home - but found that the US map is over a gig! - as I'm on a 2mb connection at home, I thought I'd best use the 100g connection at work.....
but when I try laucnh the maploader at work - I get the unexpected error.
so last night I went home - fired up maploader.....but got the same error!
but after uninstalling and re-installing maploader I finally got it to work..
bit pants really as I had to leave my laptop on all night to download the US map.
nil marks out of 10 to Nokia for being environmentally friendly! - its a data file - why not just bung it on an html page for everyone to download?

Brand new E90 map loader error

When running the map loader first time it doesn't recognize neither the E90 in transfer mode or the memory directly connected to a usb port on my laptop. and map loader close up right away.
PC suite works fine and allows me to install any program in the phone memory or memory card.
Card is a 2GB which has more than 1.5 GB free.Message Edited by robmir on 28-Aug-200710:52 PM

Hi robmir
Have you run Maps application at least once with your memory card in E90 as this defines the folder structure that Maploader looks for to write data?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

The Dreaded Xilinx Fatal Error

Hi All,
I've got a PXI-7813R and several C series modules.
When I added some code to retreived LSB weights and offsets, after a while I started getting a compile error repeatedly, and I haven't found a way past it yet. I saw several posts regarding different fatal errors, but so far I haven't been able to figure out what I've done to make the FPGA gods angry.
Here's the important part of the error message:
Mapping all equations...
FATAL_ERROR:Xstortability/export/Port_Main.h:127:1.17 - This application has discovered an exceptional condition from which
it cannot recover. Process will terminate. For more information on this error, please consult the Answers Database or open a
WebCase with this project attached at http://www.xilinx.com/support.
ERROR:Xflow - Program xst returned error code 1. Aborting flow execution...
Would someone be kind enough to point me in the right direction? In the meantime, I'm backtracking and attempting to isolate the issue.
Thanks,
Jim

Thanks once again, Basset Hound.
I had tried the instructions in that document the other day without success, but it worked today. I think I'd made a silly syntactical error before like forgetting the semicolon. For anyone else who comes across "Port_Main.h:127:1.17", here are the exact modifications I made to vhdl_area.opt, literally spelled out:
# Global Synthesis Options
"-keep_hierarchy SOFT"; # Fix outlined in the NI document
"-ifn <synthdesign>"; # Input/Project File Name
That was very helpful, and all seems to be well for now (fingers crossed). Now I can get back to concentrating on the problem from my last thread.
Cheers,
Jim

The dreaded "Infinite Loop" error

I get a "Serious error.. The Driver for the display was unable to complete drawing operation..blah..blah.. The display driver for nvidia Geforce 4 Ti 4200 with AGP 8X seems responsible....
The log in windows sez a infinite loop error...blah..blah..
Anyone have any suggestions?
Thanx
Specs
Enermax 350w PSU
+3.3V=32A
+5V=32A
+12V=17A
-5V=1A
-12V=1A
MSI 865 PE Neo2 L BIOS 1.5/Intel chipset 5.0.1007
2.4GHZ P4 533FSB
2X256MB Infineon DDR333 (Using non dual channel)
80 Gb WD JB
MSI Geforce 4 Ti 4200/ nvidia 52.16
Sound Blaster X-Gamer
LG DVD ROM
LG 52x32x52
DirectX9b
Clean Install Windows XP & Service Pack.
Idle cpu:32C Load:48C
Bios settings on default slow

What is fastwrite (MB or video card?) and can you disable it any way besides buying s/w? I've looked all through my BIOS and Detonator setup, can't find this anywhere.
My reboots are back.

The Dreaded ORA-01830 error.

The following code snippets (taken from a java server pages program) :
<%! private String timeStamp() {
java.util.Date today = new java.util.Date();
SimpleDateFormat formatter = new SimpleDateFormat("dd-MMM-yyyy:HH:mm");
return(formatter.format(today));
%>
<%
SQL = "Insert into changelist (RcdNr,BaseNr,SiteNr,Action,UpdatedBy,DateUpdated,Remarks) ";
SQL += "values (changeListCounter.nextval"+login.getBaseNr()+",'"+selSite;
SQL += "','Reactivated','"+login.getUserID()+"','"+timeStamp()+"',";
SQL += "'"+request.getParameter("txtReason")+"')";
RowsAffected = Stmt.executeUpdate(SQL);
%>
result in the following error:
java.sql.SQLException: ORA-01830: date format picture ends before converting entire input string
The SQL statement created is as follows:
update sites set status = 1,deactivatedby = '[email protected]', datedeactivated = '15-Jun-2001:09:21' where sitenr = 'ULDF0001'"
Datedeactivated is defined as a 'Date' field in table sites.
Oracle 8i Error Messages returns the following:
ORA-01830 date format picture ends before converting entire input string
Cause: A valid date format picture included extra data. The first part of the format picture was converted into a valid date, but the remaining data was not required.
Action: Check the specifications for date format pictures and correct the statement.
QUESTION:
What is the correct date format picture to get both the time and date into an Oracle 'Date' field? I've seen many posting on how but never any on what. TIA.
null

<BLOCKQUOTE>quote:<HR>Originally posted by John Haasbeek ([email protected]):
To use a string in an insert, you can guarantee success only by using the TO_DATE function and explicitly specifying the date picture. That is because the default date picture is modifyable in the database init file (initxxx.ora). So do the following:
String myDateString = "20010501";
String myDateFormat = "YYYYMMDD";
sql = "INSERT INTO my_table (my_date) ";
sql += "VALUES (TO_DATE('" + myDateString + "',";
sql += "'" + myDateFormat + "'))";
John H.<HR></BLOCKQUOTE>
And to use both the date and time it would be
String myDateTimeString = "20010501105801";
String myDateTimeFormat = "YYYYMMDDHHMMDD";
sql = "INSERT INTO my_table (my_date) ";
sql += "VALUES (TO_DATE('" + myDateTIMEString + "',";
sql += "'" + myDateTimeFormat + "'))";
Right?

Why am I suddenly getting the dreaded "ID = 5000" error with Illustrator 5.5? I'm only using CC for Muse.

I only use Adobe Creative Cloud for Muse... no other option. I have CS 5.5 and am suddenly getting the "you do not have enough access privileges" error and can't save any illustrations. What the hell is going on with Adobe?

shambles,
You could try to reinstall using the full three step way (otherwise strange things may linger):
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

The Dreaded message "Publishing Error"

Hi Kablin, Apnewbie, or anyone for that matter,
I recently purchased a MacBook and am new to Mac...
I have read some of the forum comments and have tried to resolve my "Publishing error" message for my first web test page with no avail.
Varkgirls comments and a few other threads suggested various alternatives:
I have carried out the deletion on the .plist file in the Domain - no problem...
I have run a repair on keychain (and not quite sure how Keychain truly works)... I did change access to allow for "all sites"; though when i entered ny password the 'Allow Once' Button was only highlighted instead of the 'Allow always' (why? perhaps you can answer this later).
First Help please - i created a folder "Web" in my iDisk and now it tells me I have no permission rights to rename or delete it. I can access iDisk from the net however there is no icon to delete the new "Web" folder on the internet-window. I am logged on as administrator.
I read Apnewbie notes and followed thorough with moving my test site to the folder called sites on iDisk on the net. Yes, I moved the folder and the index across...
Note the folder 'sites' does not have any other folder inside it as been suggested by the forum that it would contain folders 'web' and inside that 'iWeb'!!!
Second Help please - from safari I next tried the suggested URL http://web.mac.com/motiondreams/iWeb/eddierodgers/Welcome.html
and i get back an error message.
obviously the URL is wrong..
I am using a Macbook and have a full .Mac account; OSX 10.4.8; iWeb 1.1.2
i am directly hooked up to my ADSL2 modem, and will also be checking with my service provider on the firewall, proxy, if any issues exitst.
I reside in Australia so its sure going to be a slow process to get me sorted here. However, I truly would appreciate your help (or anyone who is also reading this)... and thanking you.
MacBook 2 core Duo (Black) Mac OS X (10.4.8)

Rodgered,
Sorry I missed your post yesterday.
For starters, how large is your site? Highlight your Domain file and Command+I to get the size. A lot of network timeout errors have been coming from your part of the world lately. This may be the problem if you are trying to publish a large site or one with a lot of blog entries.
Mark

The dreaded map loader error

Similar Messages

Maybe you are looking for