The dreaded Question mark folder

I have 2 G3 400 mgz imacs and the one I have most on, stops at the question mark.
While looking at posts it seems that it is better than vegas odds that it is the battery that is dead.
I had been resetting to date to WWI era for some time.
Then I had turned off the power bar as storms were rolling thru and our electric goes surgy.
Now the question mark.
I found a link to other world computing and ordered a battery
but have only found dead or broken links to the how to change the thing
I haven't been inside a computer since I installed a hard drive in my IIGS woz and have vague memories of having to ground self or fry the machine
Is there any links anybody knows that can hold my hand?
Thanks
Barry

Check out this site Installation
iMac HDD Upgrade Guide (Slot-Loading) Visual Installation Guide - slot loading iMac Hard Drive Visual Installation Guide
You could try to locate the service and repair manual for your iMac on the Internet.
iMac G3 600 is imac_summer01.pdf
other names iMacslotloadCD.pdf or iMac_early2001.pdf.
Robert

Similar Messages

My macbook pro is still under warranty. I have just put it into Mac 1 to be repaired because I had the folder with the dreaded Question mark on it....new hard drive. I was told that if I wanted my data retrieved, I would have to pay $445 p/h. Ahh!!!

My macbook pro is still under warranty. I have just put it into Mac 1 to be repaired because I had the folder with the dreaded Question mark on it....new hard drive. I was told that if I wanted my data retrieved, I would have to pay $445 p/h. Ahh!!! Shouldn't that be covered by warranty?

My newest Mac just did the same "folder of death" dance. It's too late for you now, but you might consider a passport backup drive.You can get 2&3 T-bytes now fairly reasonably priced. A given with computers is they will crash, just a question of how bad and when, so you can be prepared for the next time.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

TS2570 i have an intel imac and im getting a grey sceen. I get the flashing question mark folder. iv changed the H.D 2x and tired to install a new os into it but no luck. The mac isnt going into safe mode or anything. help?

Intel imac 2009. Grey screen with question mark folder. Changed harddrives 3 times now. Tired 5 keyboards on all Usb ports and a hub and keyboard wont boot to startup or safemode of anything but hub gets power. disc drive wont eject or accept a disc cuz keyboard commands not being sent to computer. Help?

Keyboards must be connected directly to the USB port, not through a hub.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT1310 I have a macbook pro about 4 years old. I can't get it to open past the flashing question mark folder. However, I just tried to hold down the option key and the question mark disappeared. Still, nothing...the light is on the screen but nothing e

I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears. Nothing beyond that point....help?

There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

The dreaded question mark in a Q

Hi, all
I am only getting the dreaded Q-? in web sites that have videos. So I checked - I'm running QuickTime 7.3, should I go back to 7.2?
This is a recent development and isn't just a web site here or there, seems to be happening on almost every web site I visit that has videos - whether they are commercials or actual site content.
Is anyone else out there having this problem?
Thanks,
Luan

I tried this and it's working, but as I said, it's been sporadic so we'll just have to wait and see. Hope it helps you.
New! Re: Quicktime question mark
Posted: Nov 18, 2007 5:26 AM in response to: Razvan Zamfir
Reply Email
I did this and it worked perfect:
I found this helpful solution on another mac forum. Hope it helps.
1) Open the folder Macintosh HD/Users/your_user/Library/Preferences
2) In this folder, search the file com.apple.quicktime.plugin.preferences.plist
3) Open it with Textedit
4) Search for this string (without the quotes) "<key>application/x-shockwave-flash</key>"
5) On this section, change the "<true/>" string to "<false/>" (without the quotes)
6) Save and quit Textedit
7) Relaunch Safari and ENJOY!!!!

The dreaded question mark

Hey Peeps,
I think I've read every thread & tried every scenario pertaining to the "?" & still cannot get QT files to play, not flash files. I use XP Pro at work, but use a Mac at home. I'm trying to view movies I built at home and put up on an iWeb site with my work machine. The files are 3.6 mb H.264 & still get the question mark. I've unchecked the flash options for MIME & browser, & I did update my flash player. I can view all the flash content on You Tube. I have the latest ver of QT on my work machine as well. Any ideas?
Thanks,
Steve
iMac G5 2.1 Ghz isight refurb 1.5 gb ram iMac G4 800 mhz Mac OS X (10.4.4) XP Pro at work

I tried this and it's working, but as I said, it's been sporadic so we'll just have to wait and see. Hope it helps you.
New! Re: Quicktime question mark
Posted: Nov 18, 2007 5:26 AM in response to: Razvan Zamfir
Reply Email
I did this and it worked perfect:
I found this helpful solution on another mac forum. Hope it helps.
1) Open the folder Macintosh HD/Users/your_user/Library/Preferences
2) In this folder, search the file com.apple.quicktime.plugin.preferences.plist
3) Open it with Textedit
4) Search for this string (without the quotes) "<key>application/x-shockwave-flash</key>"
5) On this section, change the "<true/>" string to "<false/>" (without the quotes)
6) Save and quit Textedit
7) Relaunch Safari and ENJOY!!!!

G4 Won't Boot Up and Shows The Flashing Question Mark Folder Thing

Ok so I bought a Quicksilver G4 from this guy and he said that he took is info off it and now it won't boot up. So I have a Tiger Disk and I tried the to boot from the disk by pushing C down while it was booting and it still goes to that Flashing Question Mark and Folder thing. What should I do? Should I take it in or is there something I can do without taking it in?

Hi! It should boot from the install disc by holding down the "c" key at startup with the disc already inserted as long as it's a retail disc and not one for another model of computer. If it won't boot from a retail install disc then you have hardware problems. Tom

How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
I would appreciate some expertise on this issue a.s.a.p. Thank you!

Ok, now I am stuck:
Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

Persistent Flashing Question Mark Folder Icon, after Repair & Rebuild-THX!

Hello All,
Thank you in advance for any insights.
For the past week, one/two days after a force re-boot, my Quicksilver Mac (OSX 10.4.11 and OS 9 Classic) starts up with the dreaded flashing question mark folder.
The start up disk has always been on "Mac OS X, 10.4.11 on main stuff" ("main stuff" is the name of the hard drive.)
The first time, I ran DiskWarrior and rebuilt the hard drive, which is kind of new as it was replaced in April 2009. Then I ran OnyX and got a clean bill of health. The Mac was shut down at the end of the day as is my habit via turning off the power strip.
If it helps, here's part of the DiskWarrior report:
• 13 files had a directory entry with an incorrect text encoding value that was repaired.
• 340 files had a damaged extended attribute that was repaired.
• 3 folders had a directory entry with an incorrect custom icon flag that was repaired.
• Incorrect values in the Volume Information were repaired.
Disk Information:
Files: 370,719
Folders: 85,161
Free Space: 92.55 GB
Format: Mac OS Extended (Journaled)
Block Size: 4 K
Disk Sectors: 268,171,472
Media: WDC WD5000AAKB-00H8A0
The next day, the flashing question mark folder reappeared. This time I used the original system installer CD (labeled Power Mac G4 OS X Install). Disk Utility made its repairs. And this time, the computer was put to sleep instead.
In the morning, it woke up, the wireless optical mouse worked for a few seconds, the hard drive is humming along then all of a sudden the arrow (mouse) froze and none of the keys on the keyboard functioned.
After some research, I deleted the energy saver preference (powermanager.list?) and ran Disk Utility again. And again, I shut down b/c I wasn't going to use the Mac for a day or two.
This afternoon, the pesky icon reappeared at start up. At first Disk Utility didn't see the hard drive then I restarted and the hard drive was selectable though not mounted. It was repaired and verified yet once again. Btw, when I did hard drive test, the message says something to the effect that it appears to be working properly.
My question is, might anyone know what's wrong? I've been backing up after every use and I have a laptop. But I love working on the desktop and if this issue can be fixed, that would be perfect.
As an aside, I've read that I should do a clean install. Would doing a clean install mean I need to re-install OS 9 as well as all other all other software programs-Adobe Creative Suite, Quickbooks, Verizon DSL, printer drivers etc.?
One final question, can I continue to boot up from the CD, repair then restart or will I damage the computer? Once it restart, everything seems to work normally and well.
Many, many thanks for reading and any help would be greatly appreciated!
Have a wonderful weekend.
Sam

Disk damage can also affect the startup sequence, but I think what you have already done should have repaired any disk damage, or given you more information.
Once you have ruled out Disk damage, you get the flashing question mark when your Mac cannot find:
• the preferred operating System
• of the preferred version
• on the preferred startup drive.
All these items are stored in the parameter RAM, backed up by a 3.6 volt, non-recharging 1/2-AA size battery that lasts three years or so, unless you turn off all power at night.
If you cannot remember when you last changed that battery, now is a good time. Be sure to reset the PMU/PRAM after installing the new battery.
Message was edited by: Grant Bennet-Alder

Flashing Question Mark Folder on Start-up

I recently starting having administration issues with my Mac Mini.
I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
At this point, the start-up ping is gone.
I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

generally, the flashing folder mark means it can not find the startup drive.
if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

Boots to flashing question mark folder and disc utility cannot locate internal hard drive

Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

It was the internal HD cable. I replaced it and now my MacBook Pro works

Flashing Question mark Folder and clicking - no start up.

Dear Mac Users,
I've already got some info on the above, but my 3.5year old G5 iMac wont get past the flashing question mark folder icon. It can't find the start-up drive. The think the hard drive is dead - if I start up from external HD it's OK and/or Tiger CD - but the mac's HD is nowhere to be seen on any disk utility.
Just bought Disk Warrior - that wont see the iMac HDrive either - so unless anyone has got a fix, it looks like the thing will be dumped or I get a new HD. Are these easy to buy and fit? It's a Rev A model, (the buzzy first edition). I haven't got all my files backed up, just the key ones, which are now on a new alum iMac. Or I could run it off an external drive (noisy, though).
I had been moving the G5 around a lot (switched off) before it went belly up - could this be a cause?
Maybe it'd been feeling left out, with the new 24in installed.
Hope someone can shed further light.
Rob
(PS - anyone want buy my Disk Warrior?)

Your drive is dead, you can look in [macsales.com] or [smalldog.com] for a new new one. The drive isn't too difficult to replace, you can do it yourself, and do get the largest one you can afford, just make sure it's a 3.5" SATA.
Keep your DiskWarrior, you never know when it'll come in handy.

Question Mark Folder Problem (Already replaced hard drive)

On Sunday night I found my macbook pro ("13, mid 2010, refurbished) in a frozen state a few seconds after waking it from sleep. So I did a forced restart and then my macbook wouldn't boot (blinking question mark folder). I troubleshooted with the OSX Install DVD on my own before taking it to the Genius Bar (disk utility & TDM could not find the hard drive), and we both came to the conclusion that I should install a new drive. So yesterday I bought a new drive, did a fresh OSX install and managed to migrate all of my info from my presumed damaged drive to the new one. Everything went smoothly and the computer was in working order all night. That is until this morning when I shut it down before bringing it to work. On my lunch break I decided to fire up my newly upgraded macbook only to find that it once again would not boot, still with the blinking question mark folder. I also tested to see if I have faulty RAM and it doesn't look like it (unless both sticks are fried). This is becoming incredibly frustrating and I hope I don't have to replace a board or anything like that. Anybody here have suggestions? It'd be greatly appreciated.

Could be something as simple as the hard drive cable...the hardware test won't identify this. Have an Apple store nearby? If so, make an appointment. If it's a bad cable, the fix is easy, but not free unless you have AppleCare.

Deleting a "question mark" folder in Library module

I am painstakingly bringing old files into Lightroom (I am building a new catalog based on the workflow I just learned at Seth Resnick's D65 Workshop).
I have brought in a folder with 209 files (just an example) but I later realized I have previously edited this folder down to something smaller -- rather than waste time editing that folder again I just created a new folder, and renamed it: the renamed folder includes the (preferred) reduced amount of files.
Next I deleted that folder from the finder and trashed it. I dont want the larger universe- I am happy with the edited files which are safe and sound. Problem is I have a sloppy question mark on the trashed filename in the LR Library module. I know that it means LR cant find my folder but I just want to delete the whole question-mark-folder line from the Library (because it's not "neat").
How do I do this?
Thanks for any advice.

You can synchronize folders (right-click on folder) to automatically get rid of missing photos, or remove the folder from the catalog entirely.

The dreaded Question mark folder

Similar Messages

Maybe you are looking for