The Dvorak keyboard doesn't work

I set my setting as dvorak but it doesn't work, the keyboard is still normal.

Figuring that it at least won't hurt, I submitted the following feedback at the link below.
Maybe if lots of people ask for this feature, there'll be more chance they'll consider it.
Here was my request:
Hi,
I own both an ipad 2 and iPad 1. Both allow for a hardware keyboard layout of Dvorak, but iOS 5 does not have a software keyboard layout in Dvorak.
The Dvorak layout is a high efficiency keyboard layout that places the most commonly used English vowels and consonants under the touch-typist's home keys and is designed to speed up typing. This is as opposed to the Qwerty layout which was created to slow down the typist so that manual typewriters would not jam (and how long has it been since you've used a manual typewriter!!:)
I've been using Dvorak for 11 years, so it's really difficult to change back to the inefficient Qwerty layout.
Could I please ask you to consider adding a software Dvorak keyboard layout to the iPad? It would be a wonderful addition.
Thank you for considering my request,

Similar Messages

Caps lock burn keyboard doesn't work

Hey guys,
do you know what is wrong with my macbook (MAC OS X,10.6.6) the key caps lock burn and it won't to turn off and the all keyboards doesn't work?
Is it possible that that caps lock and this problem with all keys are connected, keyboard doesn't work from when this caps lock burn. ?.
I dont know what to do...
do you know?
Thank a lot for some advance!
m.

Hey reandel,
I'd check out the recommended troubleshooting steps within the following document:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Welcome to Apple Support Communities!
Best,
Delgadoh

The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

Forum and support for Boot Camp:
http://www.apple.com/support/bootcamp

Italian keyboard doesn't work under the gui

I have an italian keyboard on a x86 Solaris 10 installation.
All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
Even applyng the 118966-08 patch as suggested doesn't work.
Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
Any suggestion to fix this ?

The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

TS1277 HI. I have followed all the appropriate steps above and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user

HI.
I am having trouble authorising my Mac Air to my Itunes account. I found a discussion explaining how to go go into 'Terminal', then adding a command. I have followed all those appropriate steps and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user. Can anybody offer any suggestions?? ta

Does the command that you're trying to enter in Terminal begin with the word 'sudo'?
If so, your keyboard is working fine. When you type your password after a sudo command, nothing is echoed to the screen for security reasons (not even the * that are normally registered in other user interfaces). However, the program is registering what you type.
Just type your password and press 'return' and the command will be executed (so long as you type it correctly; if you don't, you'll get an error message).

Why in spanish the keyboard doesn´t work Q or A letter

That side doesn´t work sometimes in games, anybody that the same problem?

I get erratic loss of input capability into my Touch. On some days in the browser ,the W key doesn't work but the adjacent Q or E keys work just fine when I slide my finger back and forth. A few hours later, it works just fine. Last night I was entering a new location in the weather, the keyboard worked fine but after a search, it would not let me click on the new location to set it up. I could get a blue background but it would not click to complete the entry. Again, I tried it 20 min later and it worked just fine. Same thing on iTunes, there are occasions when the screen is unresponsive to my input and other times when it works just fine. I have one of those plastic covers sold at the Apple store to protect the screen and maybe that's the problem. However, recent rollerblade fall proved the worth of the protector as the cover was deeply scored but the screen was fine (was erratic before fall, not caused by fall). Touch is not jailbroken. Don't want to give up the protection film but I'm not sure whether there is a problem with my iTouch or just with my touch.

Since OS X update, under Citrix Reciever, the keyboard doesn't work anymore. The trackpad does. Please help.

I have a Macbook air. OS X 10.9.5. Since OS X update, under Citrix Reciever, the keyboard doesn't work anymore. The trackpad does. Please help.

The following from the Citrix forums indicates others are having the same problem and that one has opened a case number with Citrix: http://discussions.citrix.com/topic/355864-os-x-1095-safari-71/

My keyboard doesn't work from the login screen, but when I login as a guest user it works fine (minus the brightness buttons, playback buttons, etc.).

I've already switched out the batteries and the keyboard works fine, so I fear it might be some sort of bug? All the methods of restarting or resetting certain settings can only be done from the login screen or from within an account, when the keyboard doesn't work, and the guest options are limited to non existent.

Try doing a SMC reset, you may need to do this 2-3 times as sometimes the reset doesn't always "take" the first time. To do a SMC reset, shut down the computer, unplug the power cord from the wall and computer, wait 15-20 seconds and restart normally and test. If after 2-3 resets it still does not work test another keyboard. If that keyboard works then this indicates your keyboard has failed and needs to be replaced.

Blackberry 8330 keyboard doesn't work for the 2nd time

Hi, this is the second time that this has happened to me. The first time, I had finished a text message, and left it on my bed, only to come back an hour later, and the entire keyboard didn't work. The only thing that worked was the trackball, but it could only move around; I wasn't able to click it or anything. After many battery pulls, I looked online, and saw that I could try to reload the OS using application loader. I did that, but I was left with the same error. I eventually ended up having to go to the store, and as I was still under warranty, got them to replace it for me. All in all, a huge hassle. Lo and behold, two months later, the same issue is back. I've tried the battery pulls, and reloading the OS, but nothing seems to work! Any ideas? I don't want to have to keep going back to the store to replace it.

I have the same problem on My Blackberry 8310 Curve..

Apple Wireless Keyboard doesn't work in Vista Ultmate?

My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
Should I install the driver in Mac OS first or update the keyboard firmware?
Or install a driver for Windows Vista (I can't find any on web...)
Please kindly help! Thanks a lot.

this problem is fixed, but if anybody has an idea what happened, I would like to know.

Problem with XP Pro sp1 install - keyboard doesn't work - MBP

After using bootcamp to repartition the HD and rebooting with an xp pro sp1 cd, the blue windows installer loads and runs fine up to where you need to press the enter button to install windows or F3 to exit. At this point, the keyboard doesn't work at all and I have to push the power button. I also can not load osx or the osx boot disc, but the xp disc still loads fine. Currently working on slipstreaming a w/ sp2 to see if this will fix the problem. Prior to bootcamp, I upgraded osx and my firmware. Anyone else encounter this?

You need to use SP2. There is a reason it's recommended by Apple. If you have a valid XP install disk you can easily slipstream it with SP2, which is perfectly legal and effective, and is a relatively painless process.
http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
Nick

The 7 key doesn't work after lion install

The 7 key on my MacBook pro keyboard doesn't work following lion installation. (I'm using my iPad right now obviously!)
When I press 7, basically random stuff will come out. A set of 3 to 5 random numbers or some "command" that whatever program I am in doesn't recognize.
I tried rebooting. I have no idea where to even begin, help!

And of course this morning all keys are back to working again! But last night it was 7, J, U gibberish.
At first glance it does seem like something that might be a hardware problem, but I am deeply suspicious of coincidences like this. I'm kind of like house md that way I guess. Especially when at least two of us experienced this.
I think I will also wait for the next software update and see if that helps. At least I have my iPad to use when the keys are on the fritz.
Good luck!

10.5.6 USB apple aluminum keyboard doesn't work...help!

After installing 10.5.6 my apple keyboard doesn't work, but the apple mouse plugged into the keyboard works fine. I installed the combo update and it still doesn't work. Any ideas?

I also have the same problem with a MacMini running MacOS 10.5.6 Server. The Al Apple Keyboard (wired) does not show up in the USB tree. However, the wireless one (over bluetooth) works fine.
help!

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

OK, some more info.
I have re-installed os/x and applied all of the updates.
I have tried to migrate my existing accounts and the problem consistently manifests as below:
1. In a new user account, I can log in and use the keyboard then logout
2. If I log in to the migrated user account, the non-numeric keys on the keyboard do not work. If I then log out, and try to log in to another account on the same machine, the non-numeric keys continue not to work.
This would seem to suggest that as the profiles being migrated are on a machine with the same version of up to date OS/X, the issue lies with either the Macbook Pro (other people have also had keyboard problems) or with the migration assistant not working properly given that the current profiles work fine on another mac.
Any more ideas anyone?

Can't set up windows on bootcamp, keyboard doesn't work

okay, i wait through the agony of the windows install non-sense, and it comes up to the part where i have to set up windows (name, accounts, etc.). But when i go to enter all my info, my keyboard doesn't work, or my mouse for that matter. I have a 24" iMac with the wireless keyboard and mouse. I don't know what to do!
Message was edited by: jayqUon

Jay:
Below is excerpt I took from [HERE|http://support.apple.com/kb/HT1461] which mandates using an internal keyboard or a USB keyboard/mouse to install Windows via boot camp.
Requirements
To use Boot Camp, you need:
1. *An Intel-based Macintosh computer with a built-in or USB keyboard and a built-in trackpad or USB mouse.*
2. Mac OS X 10.5 or later
3. The latest firmware updates available for your Intel-based Mac.
4. At least 10 GB of free space on your startup disk (single partition).
5. A full, single-disc version of Windows Vista, Windows XP Home Edition or Professional with Service Pack 2 or later. Boot Camp does not include Windows. You must provide your own properly licensed installation disc.
Important: A Windows XP installation disc must include Service Pack 2 (SP2). You cannot install an earlier version of Windows and upgrade to Windows XP, nor install an earlier version of Windows XP and update it to SP2.
6. Boot Camp Assistant (find it installed in /Applications/Utilities/ on Leopard).
Axel F.

The Dvorak keyboard doesn't work

Similar Messages

Maybe you are looking for