The e-mail account does not exist at the organization

Hi, I have a user account that people receive the following message from:
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mailserverishere #5.1.1>"
I'ved looked and this particular case could be a quirky one.
The details are:
User account A is the account that Exchange thinks doesn't exist.
User account B is her boss.
A copy of user B's email is sent to A. (done through Delivery Options)
Senders sometime receive an email back saying user A's address doesn't exist.
(which really confuses them because they sent the email to B)
This is the only time the bounce message appears.
I've removed the forward and added it again. Still the problem.
Any clues?

You need to verify old delegates in UserB's mailbox by going to Tools -> Options -> Delegates. Remove old UserA and re-add it.
This is because of option “Delegates receives copy of meeting-related mails sent to me” is ticked with old UserA id in Delegates.
If you can't see any delegates then you have another option to delete delegates rule with MFCMapi.
- Open UserB's Mailbox with MFCMapi where UserB's outlook profile configured in online mode (not Cache mode)
- Double click the Mailbox of userB to open.
- Expand Root Container -> Top of the information store -> Inbox folder
- Right-click the "Inbox" folder, and then click "Display Rules Table".
- You can see all rules configured in mailbox.
- Delete the Delegate Rule with "PR_RULE_PROVIDER" column property shows "Schedule+EMS Interface". (this is the same option which you can set with GUI Delegation "Delegates receives copy of meeting-related mails sent to me" but stale copy is still in mailbox.)
THANK YOU! Amit Tank

Similar Messages

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.

Do the following steps: 

<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>

Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.

For more information, please see the document Messaging Server
Administrator's Guide, Chapter 3, Configuring SMTP Services at 
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

Run As Account does not exist on the target system or does not have enough permissions

We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database role

Check below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

REP-52005: The specified key userlogin does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services ;
; CGICMD.DAT ;
; Example CGICMD.DAT Mapping file ;
; Syntax:
; KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
; 1. Parameter on command line to the reports servlet
; e.g. http://machine/servlet/rwservlet?KEY
; 2. Parameter on command line to a reports jsp
; e.g. http://machine/mydir/myreport.jsp?KEY
; 3. Within a reports jsp - in the rw:report custom tag
; e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
; construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
; 1. Multiple keys in this file MUST be separated by an EXTRA empty line.
; 2. Extra spaces are ignored. Multi-line entries allowed.
; 3. Lines starting with ";" character are treated as a comments.
; 4. Comments within a key or key value are NOT allowed.
; 5. NLS language support is provided and can be used (encoding should match the one
; used in HTML request - no language conversion of any kind is attempted.
; 6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
; The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb: userid=oe
;parmformjsp: userid=oe
;tutorial: userid=oe
; Paper Reports
;xmldata: userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper: userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements: userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priya

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

REP-52005: The specified key rep_drill does not exist in the key map file.

Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me please

I said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

11gR2- REP-52005: The specified key userlogin does not exist in the key map file.

hi,
i am getting this error "REP-52005: The specified key userlogin does not exist in the key map file." when running report using url
http://myserver.com/reports/rwservlet?userlogin&report_server&report=myreport.jsp....
i have added the key mapping entry in cgicmd.dat file with the name userlogin
as
userlogin: userid=scott/tiger@devdb %*
report_server: server=cluster_reports %*
but still this error,

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

REP-52005: The specified key replabel does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key replabel does not exist in the key map file.
I updated the user_string in cgicmd.dat file but of no use. Plese kindly help me on the same.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Error in CMC : The 0 plug-in does not exist in the CMS (FWM 02017)

Hello,
We have just installed a BO4 environment and migrated our legacy XIR2 environment (users, groups, universe, reports....).
I want now to modify some user/group securities on a folder. When I press the Assign Security button, the following error is displayed : The 0 plug-in does not exist in the CMS (FWM 02017)
Does anybody know about this problem ?
Thank you.

Hello,
It was good practice to redo the security when migrating from XIR2 to XI3.1.
So if you migrate from XIR2 to BI4, I think it might be a good idea to do it also.
Try first to see if you have the same issue by recreating a new group.
If it works fine, then you should use this new one.
Regards,
Philippe

New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

Erorr " The Web template "0ANALYZER" does not exist in the master system "

Hi
i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
"The Web template "0ANALYZER" does not exist in the master system "
i activated all templates but not able to execute any report in web
i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
please do help me

For clarification:
If following happens:
> you are launching the query with URL like:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
> then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
--> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
--> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
When you problem is other nature you have to describe it in detail.
Regards, Karol

Cannot drop the table because it does not exist in the system catalog. Transaction context in use by another session

Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil Kumar

Hi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
 CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
 ELSE ''Current Account Balance Inquiry''
 END
 END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar

"The file you selected does not exist" when the file definitely exists?

Hi all,
Using Contribute CS3 against Contribute Publishing Server--
I have the site uploaded and set up within Contribute and
CPS. But I am experiencing consistent "The selected file
does not exist" errors whenever I try to open most
documents within the site. I click the "Choose"
button, navigate to a file -- I can see its contents in the
"Preview" box within the Choose dialog -- and
when I click "OK", I get that file does not exist
error.
This is happening with most but not all files in my site
tree. Trying to find a common denominator, it certainly does seem
that files which trigger this error are all templated files.
Non-templated files open fine.
Contribute is configured to talk to the server (IIS) via
WebDAV.. Am trying to get the sysadmins to enable FTP to see if
this behavior also shows up then, but have not been able to get
this done yet.
Thanks all :-)
Reuben

Would I have been better off posting this in the General
Discussion section? Could the moderators move it if so,
please?

The name '' does not exist in the current context

I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | Igor

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The Table.Column does not exist on the rowset

Hi I have the following issue:
I keep getting a message in Power BI Designer Preview that states:
The 'collections.Name' column does not exist in the rowset.
I have a MySQL DB connected to an Access DB and then I've created and saved a query within Access.
Then I'm bringig in this query into Power BI Designer. To note, I can see my 1 row of data in the Query view of Power BI Designer but my error appears when I goto report after it tries to load the data into the model
the MySQL Statement looks like this:
SELECT orders.TRUNKSHOWID,
orders.ID,
orders.DATEENTERED,
orders_products.NUMBER,
orders_products.SIZE,
orders_products.DESCRIPTION,
products_categories.NAME AS Cat1,
products_categories_1.NAME AS Cat2,
collections.NAME,
Releases.Name,
orders_products.PRICE,
orders_products.DISCOUNT,
orders_products.TYPE,
products.WHOLESALECOST,
orders.FIRSTNAME,
orders.LASTNAME,
orders.ADDRESS,
orders.ADDRESS2,
orders.CITY,
orders.STATE,
orders.ZIP,
orders.COUNTY,
orders.COUNTRY,
orders.PHONE,
orders.EMAIL,
orders.BILL_FIRSTNAME,
orders.BILL_LASTNAME,
orders.BILL_ADDRESS,
orders.BILL_ADDRESS2,
orders.BILL_CITY,
orders.BILL_STATE,
orders.BILL_ZIP,
orders.BILL_COUNTRY,
trunkshows.TRUNKKEEPERID
FROM trunkshows
INNER JOIN (Releases
INNER JOIN ((((products
INNER JOIN (orders_products
INNER JOIN orders ON orders_products.ORDERID = orders.ID) ON products.ID = orders_products.PRODUCTID)
INNER JOIN products_categories ON products.CATEGORYID = products_categories.ID)
INNER JOIN products_categories AS products_categories_1 ON products.CATEGORYID2 = products_categories_1.ID)
INNER JOIN collections ON products.COLLECTIONSID = collections.ID) ON Releases.ID = products.ReleasesID) ON trunkshows.ID = orders.TRUNKSHOWID

Hi
When you create a workbook in DEV, you will be assigning a query for that workbook
When you transport workbook from DEV to QA,the assigned workbook comes along with it
When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
Regards
N Ganesh

Table ZCHECKPICK does not exist in the database

Hi!
 I have a table "ZCHECKPICK" no "MANDT - Client".
 Then I inserted a field "MANDT - Client" and executed SE14 to "Active and adjust database".
 The table is now "does not exist in the database" but the struture is ok.
What do i do to get the table in DataBase again?
<Priority normalized in subject line>
Edited by: Vinod Kumar on Sep 13, 2011 9:32 AM

Dear Clayton,
you can try a few things
1) generate/activate the table prior to call SE14.
2) after confirming that the table is well generated, go to SE14 and choose "Delete Database Table"
3) then, still on SE14, click on "Activate and Adjust database"
[http://imageshack.us/photo/my-images/607/20110913010743.jpg/]
That should fix it.
Kind Regards
/Ricardo Quintas

The e-mail account does not exist at the organization

Similar Messages

Maybe you are looking for