The e-mail and bookmarks are out of focus or foggy
The problem is that my e-mail and bookmarks are out of focus. When I run the mouse across it, it clears up. I've run every kind of software and nothing helps. I got in touch with My P.C. support and they didn't know or care to fix it.
hello jims1914, please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in ''firefox > options > advanced > general''.
Similar Messages
-
I want to return to the old format, but don't know how!
No problem, I'm glad to help.
-
Initially, the Demon support desk asked me to reset all my browsing history which did nothing.
I tried Internet Explorer (7.0.5730.11) and this too failed initially but after several tries, I managed to log in and collect my mails.
I then logged out and tried Firefox, which failed (Incorrect log in name or password).
I immediately tried IE again and got in first time.
In Firefox (TOOLS, OPTIONS, SECURITY, EXCEPTIONS), I set web.mail.demon.net to permit the site any access that might have been denied.
The user name and password ARE correct (that would be too easy) but Firefox seems not to send one of these correctly ??? or is not sending something I.E. does.
aarghhhFrom the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable! Rarely used and out of warranty, what a rip off!! I have been on MACS since the 80's and things are getting more and more difficult to deal with. Why did it quit after barely being used? Any help from Apple?
It depends on what you mean by "barely one year old". If the iMac is only a couple of days out of warranty, Apple's been known to make exceptions and extend the warranty, though it's by no means guaranteed. If it's several days or more out of warranty, then Apple will fix it, if it's a hardware problem, but the repair won't be free. This is no different now then it would have been with a Mac purchased back in the 80s.
Why the drive failed, if indeed it has, is impossible to say. Could have been a static shock, a weak component that failed when power was applied, or a mechanical fault in one of the tiny parts used in optical drives and hard drives that finally broke.
Regards. -
I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on
You won't see the frame edges if you are in Preview mode, so you should use Normal mode if you want to see them. You can turn off the Document Grid in the View menu (View>Guides & Grids>Hide Document Grid).
-
My iMac running 10.7.5 has suddenly developed the habit of asking for my keychain password every 10 minutes or so. iTunes, mail and airport are the usual requesters. It's making me nuts! And no, I have not recently changed my password to start this new issue.
Hello dowaco
Try running Keychain First Aid on your keychain or just rese your Keychain to create another keychain to see if that resolves the issue of the repeated prompts for the password.
Resetting your keychain in Mac OS X
http://support.apple.com/kb/ts1544
Regards,
-Norm G. -
The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts. I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone. I tried turning contacts for both off and on and rebooting, but it didn't help. Any ideas?
Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting. You would need to check with your employer's IT department to confirm this. You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.
-
How often syncs Firefox sync with the server were my bookmarks are storaged? Can I turn of the historical sync because one computer is at home and the other is at work. So I use totally different webpages and would like to have the history disabled.
OK, I found the part about history. It is just to unmark that.
But still i wonder how often it sync? Instantly? Or when closing FF? -
Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.
Erica,
I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
For the rest of us, please post when you find a solution.
Best.
BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others) -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Why are some of my photos tack sharp while others in the same series are out of focus?
My camera is a Canon Rebel XS (dSLR) and I primarily use the 50mm f/1.8 lens.
I shoot in Manual Mode with Autofocus ON.
I am having difficulty with my photos coming out incositant - some are out of focus, while others in the same series (taken a moment apart) are tack sharp.
I've attached two examples - one of the out-of-focus image, the other sharp images (both have been blown up).
It is not camera shake and my settings are identical for both photos. (ISO 200 | f/4.5 | 1/100sec in this instance.)
This has become such a problem that I find myself needing to take 10x more photos of the same subject/pose in order to hopefully get one sharp image from the series.
I have asked multiple people about this problem (though I have yet to take my camera and lens to a shop due to lack of funds) and no one has any idea of either what I'm talking about or what the problem could be.
I would appreciate your thoughts and help!
Thank you!
Fuzzy/Out of Focus:
Sharp:This new pair of images does not look like camera motion -- this one looks like it missed focus.
If you use the included Canon Digital Photo Professional that came with your camera, you can right-click an image and tell it show you the focus point which were used (the camera wont know if you did a focus-and-recompose technique... so if you recompose after locking focus then the focus points indicated by DPP wouldn't be meaningful). But I bring this up because it would allow you to determine which focus point the camera claims it used.
I think you mentinoned that you used "One Shot" focus mode -- not AI Servo. One Shot should block the camera from taking the shot until it thinks it confirmed focus-lock on the selected AF point (or on at least one AF point it you allow the camera to pick from any of its available focus points.) In AI Servo the camera WILL take the shot when you fully press the button -- whether it successfully locked focus or not.
That brings us back to the subject of the focus test.
If you do not own a commercial chart, then you may want to download one from the Internet and print it. Here's a good site: http://regex.info/blog/photo-tech/focus-chart
Print the chart and follow the instructions. I deliberately run the camera out of focus to nearest focus distance and force the camera to re-focus and shoot... and I repeat this at least a half-dozen times. I then repeat... but this time deliberately run the camera out of focus to infinity before forcing the camera to focus and take the shot.
Track each shot as you do the focus test. You may see a pattern emerge (e.g. perhaps it nails focus when going in one direction to find focus... but misses in another, etc.) Such a pattern might indicate the lens is getting sloppy and needs service (it's usually not worth servicing the 50mm f/1.8 due to it's low cost.) The USM and STM lenses allow full-time manual focus override (even if the lens is auto-focusing). The basic auto-focus motor lenses (like the 50mm f/1.8) do not support this and forcing manual focus without disengaging the focus system can be harmful.
Tim Campbell
5D II, 5D III, 60Da -
Photo Booth Audio and Video are out of sync?
Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
Just open Quicktime Player and under the File menu you'll see "Record New Movie."
The downward slide continues... -
Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk
yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...
-
Mail and iCal are constantly synicing with OS X Mavericks
Ever since I downloaded OS X Mavericks, Mail and iCal are constantly syncing messages and appointments as long as the programs are open. I'm receiving notices about appointments that are years old. What's more, it doesn't seem to stop when I close the laptop, so it drains my battery as well. How do I make it stop??
No problem with Calendar but Mail keeps syncing with the server. The activity window is full all the time - apparently re-syncing though no new mail is downloaded. Rang in but they have no idea what's causing it and have sent diagnostic to engineers. In 10.8, just a quick burst of activity when mail was checked for but now it's constant. As a result, emptying the Deleted Items mailbox is very slow. Am worried about the amount of bandwidth being eaten up.
-
The type of the database table and work area are not Unicode convertible
***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
SEl, "stores which row user has selected
kdauf TYPE zle_lagerplanung-kdauf,
kdpos TYPE zle_lagerplanung-kdpos,
etenr TYPE zle_lagerplanung-etenr,
papiermaschine TYPE zle_lagerplanung-papiermaschine,
runnr TYPE zle_lagerplanung-runnr,
prio TYPE zle_lagerplanung-prio,
werk TYPE zle_lagerplanung-werk,
durchmesser TYPE zle_lagerplanung-durchmesser,
breite TYPE zle_lagerplanung-breite,
anzle TYPE zle_lagerplanung-anzle,
lgpla TYPE zle_lagerplanung-lgpla,
lgtyp TYPE zle_lagerplanung-lgtyp,
art TYPE zle_lagerplanung-art,
anzhoehe TYPE zle_lagerplanung-anzle,
fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
anzle lgpla lgtyp art anzhoehe fa
FROM zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND KDPOS IN s_kdpos
AND werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advanceDear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee
Maybe you are looking for
-
What is the difference between: "Place..." or "Add files for Upload..."?
Where can I get information about the detailed differences between the commands "Place..." and "Add Files for Upload..." of the Files menu? Understand that in both cases the files are linked and not embedded. But what further differences are there? I
-
How do I backup a large music library to two smaller drives?
Does anyone know if it is possible to split a library in half, when backing up? I have an external 1000 gig lacie drive that is the home of my itunes media folder location. I also have two smaller lacie drives that put together could have enough spac
-
Created theme is not working...Please help
Hello sirs, I have configured a portal application to PCD, created iViews, pages, assigned it to a workset and workset to a role. I have also created a theme, Desktop page and rules for the created role (In System Administration->Desktops and Displa
-
Why is this query not using the index?
check out this query:- SELECT CUST_PO_NUMBER, HEADER_ID, ORDER_TYPE, PO_DATE FROM TABLE1 WHERE STATUS = 'N' and here's the explain plan:- 1 2 ------------------------------------------------------------------------------------- 3 | Id |
-
InDesign crashing after latest update
Hello, I keep getting this error when starting InDesign and sometimes, it starts normally, but after about 2 minutes, crashes, always with this error: Problem signature: Problem Event Name: APPCRASH Application Name: InDesign.exe Applicat