The earlier version of FF brought all my previously open sites back after a system shut down (like for a scheduled windows update or similar). Now this is not happening any longer. What can I do? I liked this feature a lot and really miss it!!
I could choose to have all my previously open tabs brought back when the computer - accidentally or on a scheduled update - suddenly closed down. Sometimes I have windows open for several days with articles and sites that I spent time with finding. Now they are all gone and I have to painstakingly try to get them back.
Is it my mistake? I can't find any selection or choice in the tools menu that I could reinstate this useful function with. What happened?
hello; i just erased the post i started with, because my status has changed. i searched in the firefox folder and found the uninstall folder, and this time, uninstall worked perfectly, and it gave me an option to save my personal info! YAY! i installed ff 3.6.24 without a hitch; FF is Baaaaaack!
However, I did get a window saying my computer doesn't have enough resources for the latest version of 8, but that I should install the latest compatible version of firefox; which version would that be, I wonder? It takes me to the same page with the ff 3.6.24 downloads. I already have that now.
I am going to mark this as solved; thank you cor-el for helping me with this problem and sticking with me as i whined and moaned, and tried to get the courage to "just do it!"
Similar Messages
-
I just update my iphone 4. I did not change my password. I can get emails but cannot send them. How can I fix this?
Victoria
You need to delete the Yahoo account and reset it up. I just did this for an iPhone running yahoo in my house.
Settings
> Mail Contacts etc
> Select Yahoo account
> Delete account
Settings
>Mail, Contacts etc
> Add account
> Select yahoo
... add email address, password etc
Cheers -
I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS4 Illustrator the message says "License for this product has stopped working". What can I do to get this to work?
Mylenium,
Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
Many thanks for your help! -
Safari won't load and I can't update my software, ie., I get an error message. What can I do to fix this?
You can't install Safari 3 on your 10.3.9 OS.
You must use the DVD installer to re-install the older version of Safari found on it.
You can update your operating system buy purchasing Tiger (10.4) and get a more modern version of Safari. -
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?
See
http://support.apple.com/kb/TS4215 -
I am unable to sync all my selected songs to my iphone. The error message is that the computer is not authorized. However, I have authorized the computer and iTunes confirms that. Any ideas what can be done to fix this. My phone is an iPhone 4S.
Were some of the songs purchased from a different itunes account?
-
My iPhoto videos are not showing up in iMovie? I have quit, shut down my Mac and they still are not showing up? What can I do to resolve this?
It is also posible to go back to the imovie you had before, it is still on your computer - you go to Finder and it is in a folder in your programs. Many others have gone back to the old program, and perhaps I am also going to do that too.
In the new imovie it does not come up the question "do you want to download these videos ...."
You shall in imovie open your iphotolibrary in top on the left side,( it is standing under libraries) and you can see all the events you have in iphoto, then you can open the event, you shall use and drag the movies and pictures from the events in iphoto to an events in imovie. If you can,t see your libraries, you can click on a show button on top of the left side.
On the picture you see here iphoto is market on the top of the left side and the pictures to the left is my iphoto-events - and there I can open the one I shall use, and find my movies.
I -
I have upgraded my MAC OS to 10.6.8.
Final Cut Pro 5.0 still runs great, but Soundtrack Pro 1.01 opens, but operates at a glacial pace. It does not functionally operate.
What can be done to remedy this?Depending on the configuration of the computer hardware and software
you may need to consider upgrade the RAM by installing more capacity.
Also, in the same vane, choose to consider upgrade the hard drive to
one of faster transfer, such as SSD, hybrid, or fusion; if not already at
least 7200-RPM and not too full of saved content.
Since no information is given about the model build configuration of Mac
there may be other suggestions to make it work better. Usually an OS X
upgrade requires one to look at the hardware resources available to it.
The OS X works best with more memory: new higher capacity chips.
This may be possible, and they should be high quality from reputable
vender who has tested them on Apple in OS X, such as OWC or Crucial.
Good luck & happy computing! -
Last week i have instaled IOS Lion in my IMac. My IPhoto was in Portuguese now he is runnin in english. What can I do to solve this problem? I want him in portuguese. Thank you.
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
My ipad is locked, the pass code not activate my divice. what can I do to resolve this problem?
You should connect your ipad 2 to the computer you registered it too. And then, the pass code would be off. If that doesn't work, then you should go to the Apple Store and they will unlock it for you but you will have to answer some security questions.
-
hey, I just reset my Apple ID and suddenly much of my Iphone text history disappeared. and I can send texts, but not receive any. what do I do? is this related to AppleID, or is the text issue from something else? thx!
Hi blyther,
Thanks for using Apple Support Communities. If you're unable to receive texts, see this article for troubleshooting steps:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
- Ari -
I did the SMC reset for my iMac intel-based and now it won't turn on. What can I do to fix this?
Well, first things first... is the power cord fully plugged into the back of the iMac (and the wall, for that matter)?
Make sure the wall outlet has power, too... I've scratched my head over stupid issues where I forgot to flip a wall switch.
If the outlet does have power, then try doing a pram zap. Command + option + P + R (hold those at startup).
If the machine is receiving power, you should be able to see some LEDs if you look through the bottom grate of the machine to the left of the RAM door. -
I cannot get into the itunes store, was recommended to uninstall, then download again, i done this but quicktime did not install with it, so i downloaded seperately, but still not working, what can i do to fix this?, Thank you
details please
What version of iPHoto did you previpusly have? Have you run the ujpdater (in the applications folder ==> utilities double click on it and execute it - then launch iPhoto to finish the upgrade
And as always you should have a current backup of yoru iPhoto lbrary before upgrading
LN
Maybe you are looking for
-
In R12, how to open new HTML page in a new window
When I do the Payment configuration in R12, sometime I need open Payment Admistrator and Payments Manager at the same time in different tab. But everytime if I have one opened and try to open the second one, it always replaces the first one instead o
-
How display result set of a PL/ SQL function call in a dialog box
Hello, I am calling a PL/ SQL function from Apex, which returns - List of varchar. In Apex, it should show this list of varchar and "Yes" and "No" buttons on a message window. Can you please suggest a way to achieve the same. Thanks, Girish
-
Hi, I have doubt in "IN Operator" DECLARE COND CONSTANT VARCHAR2(100) := '''MCF_INS'',''MCF_TGP'''; COND1 VARCHAR2(100) := 'MCF_TGP,MCF_INS'; NO NUMBER; BEGIN SELECT COUNT(1) INTO NO FROM ACCOUNTS WHERE ACC_PRODUCT_CATEGORY_cD_F IN( COND1); ---Can I
-
Matrix values are not displayed
Hi, Im trying to select some data to matrix ,Here datas im selecting from database. im seting values it is showing error ex.Message = "Data Source - Out of boundaries [66000-29]" i did code like this rs.MoveFirst() For I = 1 To rs.Recor
-
Problems with Oracle 9iAS in Windows NT version spanish
Hello: We want to know if anybody has successfully installed Oracle 9iAS in a Windows NT Server (service pack 6) version spanish (not english). We suspect that the the language of the NT machine (spanish) is the cause of the following error message w