The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

Apple will exchange your Pod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like this one is less expensive.  Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Similar Messages

  • The microphone on my iPod Touch does not work anymore :( what should I do ?????

    Hi , my iPod is awsome,but the microphone doesnt work and i dont know what to do also before i did have probleme with my iPod but ive find a way on itunes to fix it !!! And when i talk on memo we can see that it wont get up more then 20 level !!!!

    - Make sure the mic hole is unobstructed. It is the little hole on the back side of the iPod by the camera lens.
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • My ipod touch in not working anymore how could I save it before doing a resature

    my ipod touch in not working anymore how could I save it before doing a restaure

    Restart, reset, restore are the basics from the manual.  Try each of them.

  • My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

    My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

    Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • Brand new IPOD touch does not work w Bose speaker docking station is there anything that needs to be done?. The Nano that I have works fine.

    My new Ipod touch is not working with my Bose Speaker docking station. My Nano works fine.
    Any reasons for this?

    Does Bose say it will work with your model iPod and iOS?
    Does it appear that the iPod fully seating in the dock?

  • Brand new ipod touch does not work

    Brand new ipod does not work will not sync or power up.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Ipod touch does not work with hex from sharper image

    I just bought an ipod docking/speaker from sharper image (Hex) for my ipod touch.  My ipod does not work on it. I have also had problems playing my ipod touch music on ihome products - works on some but does not work on others. Is it my ipod touch. thanks.

    Some docks are not compatible with iOS 5. Ceeck with the manufacturer. Other users have post problems with iOS 5 and iHome docks too.

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • HT1665 downloaded to 6.1.3 ipod touch does not work with previous working sound docks

    Downloaded 6.1.3 and IPOD does not work in previous working sound docks.  Cannot charge inthose docks now either.  They worked fine before download

    Reset the dock
    See if there is a firmware update available for the dock
    Sometimes tyhis works:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    Sometimes an iOS update breaks compatibility and y havet wair for a firmware/iOS  update

  • My Ipod touch does not shuffle anymore?? how do I fix???

    My Ipod touch won't shuffle anymore.  Is there somewhere in the settings that I can correct this problem?

    What happens wehn you tap the shuffle icon/control? It is on the Now Playing screen below the scrubber bar on the right side. Is it crossed arrows.

  • I recently updated to Itunes 12.0.1.  Since then, the Music tab under my Ipod Touch does not give me the option to automatically use ITunes Match to sync all my music.  Now my Ipod memory is full, which is creating a problem.  How do I fix this?

    I recently updated to Itunes 12.0.1.  Now, when I plug in my Ipod and go to the Music section, the Itunes Match option is unavailable.  Which means that my music is taking up too much memory on my Ipod Touch.  How do I re-enable the IMatch option so that my music will automatically be in the cloud?

    Hello pib1617,
    iTunes Match can be enabled on your iPod Touch via Settings -> iTunes & App Store.
    Turn on iTunes Match. Go to Settings > iTunes & App Store. Sign in if you haven’t already.
    iPod Touch User Guide - iCloud and iTunes Match
    http://help.apple.com/ipodtouch/8/
    Cheers,
    Allen

  • My ipod touch is not working anymore, the screen is totally white with no answer to the comand buttons, what should I do? Thank

    Dear Friend,
    My ipod touch stopped working since one week ago.  The screen is totally withe with no reaction of the butttons.
    I would like to know if somebody can help me to solve this?
    thank you,

    For a blank iPod or "white screen of death"
    iOS: Not responding or does not turn on
    All the troubleshooting steps in the above are likely to lead you to restoring the iPod. Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. 
    Select the iPod in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • Ipod touch does not work after I downloaded 2.0

    this evening i noticed there was a new new download with new apps and I spent the money to download it. while it was downloading there was a part about backing up my ipod . well appearantly there was an error and I went on to click continue assuming i would jsut have to relaod music and contacts and so on and so forth. well after the download was complete I connected it to i tunes and it shows up but i can't do anything from there. I unpluged it and pluged it in, tried apples 5 r's and now itunes does not even recognize my i pod is plugged in! any suggestions

    Hey!
    You might get some joy with this......
    iPod Touch won't start up
    See Skwarks post to use Recovery Mode.
    Cheers,
    John

Maybe you are looking for

  • IPad iOS 6.1.2 update causing excessive battery drain

    I have noticed in other discussions that a number of iPhone users have experienced excessive battery drain after updating to iOS 6.1.2. I am now experiencing this problem in a big way after updating to iOS 6.1.2 on an iPad 3.   Prior to this update,

  • Excise Invoice posted as Capital goods, but material is a raw material

    All SAP Gurus, J1ID data wrongly uploaded as Consumable instead of Raw material. Due to this excise invoices for these materials got captured and posted in RG23C register in place of RG23A register. (Material document can not be reversed as material

  • Unable to start WebLogic 7.0 SP2 server

    Hi, Just created a new domain in WLS 7.0 SP2 and tried to start it. It gives the following error: <Apr 30, 2003 11:50:41 AM EDT> <Notice> <WebLogicServer> <000327> <Starting WebL ogic Admin Server "stagingserver" for domain "staging"> java.lang.OutOf

  • Horizontal scrolling with a table that is 100% width of window/container

    Hello, I'm a bit perplexed - it seems to me that the only way that I can have both fixed and scrollable columns in a table, with a table that resizes to the width of the user's screen, is to have percentage widths for all the entries. Warning imminen

  • Setting window positions at startup of Labview

    Is there a way to set the window positions of the front pane and block diagrams when I start a new VI or when I look at an example (not at runtime of VI)?