The edges of my touch don't work

when I try to use the edges of the screen nothing happens. Why? Is there any way to fix that?

Okay, then it's time to have your iPod assessed by Apple. You can set up an appointment with a Mac Genius at http://apple.com/retail or you can call AppleCare for mail-in repairs/replacements.

Similar Messages

  • Ipad gets hot and then touch don't work..

    ipad gets hot and then touch don't work..

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • The only time the sound/speaker and mic don't work is when I answer or make a call

    The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice. 
    When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
    If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in. 
    I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible. 
    Hopefully the following will provide good clues:  On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

    Let me try and address some of your questions.  I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
    First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone.  So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes.  On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them.  In iTunes, you can go to Store > Check for available downloads. )
    Whenever you plug your phone in, it should create a backup of everything you have on the phone.  This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone.  You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup.   If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
    The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
    You should have no problems restoring from a backup if they give you a new phone.  However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device.   I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
    I've had no problems with my new phone so far.
    I'll try to keep checking this thread if you have any other questions or need more clarification.
    Edit: I should say we never did figure out what exactly was wrong with my phone.  The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one.  But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else.  Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
    Also if you don't already have one, make a genius appointment ASAP.  Most stores are very busy and their appointments fill up fast.  I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you.  The easiest way to make an appointment is to download the Apple Store app.  It detects the closest Apple store from you and makes it quite easy to schedule a genius.
    Message was edited by: deddinty

  • Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

    Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

    Because Wind is not an officially supported iPhone carrier and Apple warns that using an iPhone on a non-supported carrier's network may mean that some features may not be available or work at all.

  • The sound of my computer don't work, help me.

    The sound of my computer don't work, help me.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

    PROVA

    Yes, I know that, but I ever work with the right mouse button,
    because selecting groups and subgroups with double click make some confusion for me.
    Regards,
    Fabio
    ufficio tecnico
    grafica e prestampa
    Via Verdi, 11 - 43058 Sorbolo (PR)
    Tel. 0521.694111 - Fax 0521.694360
    E-mail: [email protected] <mailto:[email protected]>
    E-mail: [email protected] <mailto:[email protected]>
    Web: www.litoexpress.it <http://www.litoexpress.it/>
    Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
    The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
    created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
    You can double click on the selected object to get into the multilevel isolation mode.
    Regards,
    Satinder
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

  • The problem is that touch is not working what can i do?

    I dropped my ipod 4th generation into water after two days of keep off it did turn on, the problem is that touch is not working what can i do?

    When the iPod is dry:'
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB one and $99 for the others. They do not fix yours.
      Apple - iPod Repair price

  • My 2 year old tapped some keys on my Macbook and now the volume keys at top don't work. If I press F12, the dashboard pops up. How do I get it to work as it used to?

    My 2-year-old randomly tapped some keys on my Macbook and now the volume keys at top don't work. For example, if I press F12, the dashboard pops up, whereas previously it used to increase the volume. HELP! I'm a techno nitwit -  how do I get it to work as it used to?

    I did this myself recently while playing around with the settings - go to System Preferences and in there somewhere will be a setting saying - " use all function keys as standard function keys" or something like that. You need to deslect or say "no" and then it will work as it used to!

  • Hooked up my PS/2 keyboard and now the up and down volumns don't work

    hooked up my PS/2 keyboard (it has been in storage awhile)  and now the up and down volumns don't work

    I did this myself recently while playing around with the settings - go to System Preferences and in there somewhere will be a setting saying - " use all function keys as standard function keys" or something like that. You need to deslect or say "no" and then it will work as it used to!

  • Since the iOS7 upgrade my iMessages don't work all the time.

    Since the iOS7 upgrade my iMessages don't work all the time. The will work for for a few days, but then all of a sudden they stop working. They are still activated in settings, but not sending. If I turn on and off my phone they work again for a while and then stop again. I'm not sure if turning off and on my phone again is re-activating the iMessages which is why they start to work again for a while. But it's a pain having to turn off and on my phone each time, and when sending an iMessage not knowing whether it's going to send this time or not is a bigger pain. Also everytime I turn off and on my phone (which i think is re-activating the iMessages) a text is sent to the following UK number: +447786205094 - so it's costing me each time!
    Is there a fix for this?

    Turning off and back on or hard reset seems to work for a day or two.  After resetting I am occasionally losing messages that were there before reset.  In addition, I have had 3 messages that I received a notification for when they came in but go into messages and not there.  Message incon still shows 3 unread messages but when I open messages I have no unread messages???  Power on-off or hard reset does not seem to fix this.  At least a reset gets imessages working again.  Hope fix is out soon.  This is a PIA.

  • The voiceover on ipod touch has stopped working.  not sure how i managed to stop it.  Any ideas how I get it speaking again?

    The voiceover on my ipod touch has stopped working.  Not sure what i have done to stop it.  anyone any idea how i get it started again?

    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
    copied from page 120, ipod touch user guide 5

  • MSI GX620 the turbo and eco buttons don't work

    Hi Guys!
    The eco and turbo buttons don't want to work anymore.When this problem appeared,I have had an other.When I push the button of camera, wireless or bluetuth,it dosen't appear a sign in the right corner of the monitor...I have windows Vista.What should I do?Should I reinstall the system?
    Thank you for the answer in advanced...

    You removed SCM from your system, install it again.

  • Why excel output on the ALV Application Tool bar  don't work

    most of our company's report was view in the ALV, but the standard excel output function on the ALV Application Toolbar don't work. 
    DEFINE ADD_FIELD.
      WA_FIELD-FIELDNAME = &1.
      WA_FIELD-REPTEXT_DDIC = &2.
      APPEND WA_FIELD TO IT_FIELD.
    END-OF-DEFINITION.
    the micro above is how i fill the SLIS_FIELDCAT_ALV, is that has some problem ?
    i  am expecting for you guys  help .

    Thanks for answer me , and the problem was sovled by my colleague,  go to the toolbar   option / security / macro security/ trust access to visual basic project, and select it . and you will fine the FM REUSE_ALV_GRID_DISPLAY can use the standard excel output now .
    &#27815;&#28010;&#20043;&#27700;
    msn&#65306;[email protected]
    qq  &#65306; 107198046
    skype&#65306;zhangdezhao
    gtalk&#65306;[email protected]
    yahoo msgr&#65306;dezhaozhang
    Edited by: dezhao zhang on Jan 15, 2008 2:26 AM

  • The menu and back button don't work. 3rd gen nano

    The menu and back buttons on my 3rd generation nano don't work. I've reset it. Let it die and recharged it. Still doesn't work....What should I try next?

    Set the iPod up for a repair/replacement via Apple or a third party repair company.  Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Google for "iPod wheel replacement" for third party service center possibilities.
    B-rock

  • No connection to the apple store / ipod touch no more working

    Hello,
    i updated itunes to version 10, no more connection to the itunes store, also, the ipod touch can not be found. I tried to restart the pod touch as recommended, but since then the pod shows on the display the cable and itunes, i connected the with the pc but the ipod still can not be found.
    I tried everything which was recommended,all, also i have spoken with the support line, she recommend to deinstall all, but i can not deinstall the software "apple update", its not possible from my pc. I use windows vista.
    Stephanie

    Hi ,
    thank you, but I tried all points / links  since yesterday several times , i can deinstall 5 from 6 apple softwares, i can not deinstall Apple Software Update due an issue with an MSN Software package and i have to contact the owner of the software. Is that maybe the problem ? Also, if i try connect to the itunes store there comes always the error message 42408.
    I dont know what I should do...i having no more ideas, nothing is working: no connection to the itunes store, no connection to the ipod, the ipod could not read on itunes, still on the ipod display the cable with the connection sign to itunes.
    I think I have to bring the ipod tomorrow to the genius bar and ask them to restore my ipod touch.
    Its an nightmare.....
    Stephanie

Maybe you are looking for

  • How to move Time Machine backup

    Up until recently, I have been using an external hard drive connected directly to my computer as a Time Machine drive. When I bought the drive, I was the only person using a Mac in my house, but as time went by, and technology failed, other members o

  • Cannot install drivers- HELP!!

    The issue right now is that my laptop (gateway) is NOT recognizing my iPod and itz driving me mad!! I think I have found the root cause. When I plug my iPod in and go to device manager....it comes up as "unknown device". I right click and device stat

  • Activity prices in KP26 used for actual and plan in version 0

    We plan activity prices via KP26 in version 0. We then plan activity consumption via KP06, and run the plan reconciliation via KPSI. During the year, we need to update the activity prices used in actual activity allocation. This price also comes from

  • How to drop a column in Oracle 7i

    I tried "alter table tablename drop column columnname" in Oracle 7i, it is not working. Column is nullable Could anyone pls help me on this?

  • Updates disappear after restart

    After updating Premiere CC to Premier CC 2014 through Creative Cloud I spent a whole day editing various projects and saving them in the updated version. Today I get back to opening Premiere and it seems to have reverted back to the old version and I