The edit box in the Twitter Compose New Tweet box sticks off the right.

The edit box in the Twitter Compose New Tweet box sticks off the right
https://pbs.twimg.com/media/BNHnQSICEAAHz_H.png:large
I am aware I am not using the latest version of Firefox. Bases on what I've read I'm not going to like the changes in the latest version and do not want to change versions until absolutely forced too.
This problem occurs in safe mode, and with multiple profiles.
I have seen some reports from other people saying they have the same problem.

If you have made changes to Advanced font settings like increasing the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.

Similar Messages

How do i get that little pop up menu with all the editing choices on it that i used to get? Is there a way to get the editing box to pop up as I make a new event instead of editing an event after i just made it ??????

How do i get that little pop up menu with all the editing choices on it that i used to get? Is there a way to get the editing box to pop up as I make a new event instead of editing an event after i just made it ??????

Michal,
iCal Help is a good place to start. Here are a couple of examples:

Always use the default account when composing new messages box missing in Outlook 2010 after updating the product key.

I have 2 accounts in outlook 2010. 1 is for me and the other I have delegate access to. When I am in the delegates email and want to reply it automatically uses the account the email is in. So if I am in my email, the from is me but if I am in the delegates
email and hit reply the from is them. Now this is not working and I can't figure out how to get it to work. The only thing that changes is that office asked me to activate recently, which is weird since I have had this same computer with the same version of
office for almost a year now. I did a ton of searching and came across an option on the internet: "Always use the deafult account when composing new messages" but this option is not there on my computer. I checked another computer I have with Office
2010 also and the option is available so it must be something to do with the office activation because I haven't done it on this computer yet. PLEASE HELP!!!

Seems this is a hot issue recently, I've post a reply to another thread with the similar topic, please reference that:
http://social.technet.microsoft.com/Forums/en-US/57289ddd-0dd5-4938-92f7-ee420d8b0d7c/outlook-2010-does-not-reply-to-emails-using-the-same-address-that-received-it?forum=officeitproprevious
Thanks for your updating.
Tony Chen
TechNet Community Support

How can labview update the string control (text-edit box) after we have pressed the carriage return key on the keyboard during text-editing within that box?

Dear readers,
I have been trying to work out how to get labview to detect the event when a 'string' control has been modified, where the user has finished editing the string either by 1) pressing the enter key on the keyboard, or by 2) taking the focus away from the string control again. For example.. if I use the mouse to click on the string control and then I type 1234 into the box, I would like to have a routine that does something once the user hits the Enter key of the keyboard, or when the user takes the focus away from the string control again by clicking on something else. I would like the routine to respond even when the user didn't change anything in the text box (such as when we mouse-click on the edit box to go into edit mode, and then mouse-click on something else to remove the focus with no changes to the contents in edit-box).
The purpose of my routine is to have a edit-box for a user to change for example the centre-frequency of a vector network analyser, so that the centre-frequency of the network analyser can change once the user finishes entering a new value in the text-edit box by hitting Enter key after the number is keyed in. Even if the user has clicked on the edit box, but changes their mind by mouse-clicking on something else to remove focus from the edit box, I would still like labview to detect the event when the control loses focus, so that the centre frequency can be updated anyway (to the same value that was already in the edit box).
So far, I've tried set the string control option to 'limit to single line', so that I can try to scan for a carriage return .. '\n' ... pattern in the string. Unfortunately this doesn't work because labview doesn't seem to attach the '\n' to the end of that single line.
Could someone please suggest ways to set a flag when a user hits Enter during text-edit mode of a string control, or when focus has been removed from the string control?
While I've only described my problem for controlling a single control parameter on the gpib device, I'd like to make this feature work so that I can do the same kind of thing with other control parameters as well.
Thanks so much in advance.
Kenny

Hi Kenny,
instead of using the event structure, you can directly achieve to what you want by the KeyFocus property of the string control.
- Enable Limit to single line option
- Create the property KeyFocus in read mode and connect an indicator
Each time you click on the string to modify it KeyFocus is True; when you click away or hit Enter KeyFocus is False.
You can toggle your settings when KeyFocus changes from True to False.
Alberto

I have just created my first form and saved it as a PDF. The editable boxes have a background colour of Blue and I would like to change this. Can it be done?

Hi guys i have just created my new form and it was very easy. however once i convert it to a PDF the editable boxes in the form are blue and i would like to change the colour. does any know if this can be done?

The blue background is the field highlighting that you have the option of turning off. If you don't see the purple bar on top with Highlight Fields toggle button, it should displayed by clicking the top icon (purplish) in the navigation pane on the left

How can I increase the width of the 'mail composer' box and put the attachment box (at present on the right) below it?

The width of the 'mail composer' box is too narrow so that with my email program half the buttons are missing.
== All the time

Thanks for your swift response.
I understand the difference between the web browser and email program.
I have just started using Firefox from IE and IE displayed the new mail page full width.
Firefox displays the reading web page full width but not the compose mail page because of the layout with the attachment box to the right of the box where you write your mail.
I was hoping that there was a way to customise and change the layout.
Is that possible?
Andy

I am trying to edit my website which was composed in iweb. I have my website saved on my hard drive. When I open iweb, I can't seem to load the website folder into iweb for editing purposes. Anyone know a quick solution to this?

I am trying to edit my website which, was composed on iweb about 2 years ago. I have the website stored on my hard drive. When I open iweb, I can't figure out how to load the website into iweb for editing purposes. Any help would be greatly appreciated! Thanks

You need to migrate to a modern, supported webpage development application and leave iWeb behind. It hasn't been supported for 2 years now and was behind the curve feature wise when it was dropped by Apple.
One app that many have migrated to because it is very similar to iWeb in the GUI and features is Everweb. It has a demo version that you can try. Text and photos from you current published site can be copied and pasted into Everweb to help the migration over.
There are other possible candidates. Just search the iWeb forum for "iWeb alternative" or "iWeb replacement" to get a list of topics discussing them.

I'm embarrassed to ask this: when I click to initiate a new email message in the "From" box it automatically chooses the wrong email address (I have three but use one mainly). How can I get the right choice to appear automatically?

I'm embarassed to ask this: when I click on the new mail icon to write a new email message, in the box "FROM" appears the wrong email address: I have three but mainly use one. How can I correct this so that the right email address appears in the "FROM" box?

I assume this is Apple Mail. Try this:
Preferences > Accounts > your-first-account
Select Outgoing Mail Server of account/name you wish to use and check Use only this server
Repeat for other accounts.

With the new i0s7 update I can't delete the mail in my inbox all at once. I see there is the edit which allows you to mark all and to the right of that is MOVE and TRASH, why when you mark all you can't access these two options?

In the new ios7 update, why can't you mark all your messages in the inbox all at once? The EDIT tab lets you Mark All and off to the right is greyed out "move" and "trash", why can't you Select all and then press TRASH. It only lets you mark them as Flag, or mark as read. This *****!

Hi Scottay777,
Per pg 52 of the iOS7 User Manual, what you describe should be possible:
Delete, move, or mark multiple messages. While viewing a list of messages, tap Edit. Select some messages or tap Mark All, then choose an action. If you make a mistake, shake iPhone immediately to undo.
iPhone User Guide - For iOS 7 Software
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
If a button isn't responding correctly in Mail, you may want to try forcing it to close and then relaunch it. You may find the following article helpful:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Regards,
- Brenden

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

How to 'Only' allow Numeric value in the Edit Box in AcroDialogs

Hi all,
I've create an AcroDialog wizard, I need to allow onlu numeric values in the Edit Box. Can someone please help me with this validation?
Regards,
Chris

There isn't a keystroke event for custom JavaScript dialogs, or any proper interactive events for the fields. You can validate fields when the user presses OK, and you can test fields when the user changes focus by setting the "Action" property for the field. But the only practical way to restrict user input to numbers is to use George's suggestion. There is a number property for the fields but it has an undesirable side affect and I never use it.
Thom Parker
The source for PDF Scripting Info
pdfscripting.com
The Acrobat JavaScript Reference, Use it Early and Often
http://www.adobe.com/devnet/acrobat/javascript.html
Then most important JavaScript Development tool in Acrobat
The Console Window (Video tutorial)
The Console Window(article)

Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop. (Same CS5 and plug-ins installed OK several years ago on a Vista laptop. Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install. Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document." Any solution?

CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
So this means you will have make a list of the updates that failed, go here: Product updates
and manually download/install from there.
Gene

How to align the text vertical in the edit box in mfc?

Hi,
I had an edit box of which height is increased than the default.Now the problem here is when I am entering text into the edit box the text is not present at the centre of the edit box, It is still aligned at the top.
After increasing the height of the edit box the text and cursor are aligned at the top as shown in the below figure.
But Actually how I want is the text and the cursor position needs to be aligned centre as shown in the below figure.
Note: "EDITTEXT IDC_EDIT_BOX,10,73,156,14,ES_AUTOHSCROLL"
Can anyone please help me how can I make the text and the position of the cursor to be aligned vertically i.e, to the centre of the control.
SivaV

If vertical alignment is not possible, then use an edit box without borders, having the default height, and place it inside a static control having
SS_WHITERECT style. (In MFC Dialog Editor, set the Type and Colour properties). Both of controls will be children of dialog. Use a proper tab order. Check if the style
WS_CLIPSIBLINGS is needed too.

Why can I no longer copy a word or phrase from a New York Times article with a right-click? To copy I have to go to the toolbar Edit|Copy.

mouse right-click no longer allows me to select Copy of a word or phrase in a New York Times article. To copy I have to use the Firefox tool bar Edit|Copy.
== URL of affected sites ==
http://www.nytimes.com

One or more of your add-ons could be affecting the right-click function. You did not list your extensions. Type '''about:support''' in your URL/location bar to see a list of your Extensions, modified preferences and other Firefox information.
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Install/Update Adobe Flash Player for Firefox''': your ver. 10.0 r32; current ver. 10.1 r53 ('''important security update 2010-06-10''')
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''and'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How to get the cursor position in the text edit box?

Hi, all.
I want to get the cursor position in the text edit box
to insert some data.
But I don't know how to get.
Can someone give me some advice?
BestRegard.
Miya.

Hi Miya,
Write your own textSelectionSuite for this.
and use ITextTarget->GetRange() function.
Thanks and Regards,
Yopangjo.

The edit box in the Twitter Compose New Tweet box sticks off the right.

Similar Messages

Maybe you are looking for