The Edit Workspace

I cannot access the edit workspace. I get an error message saying it's an invalid address. This just happened today and I don't know why. It is an old program..but I've never had a problem before. Any ideas?

I am still not clear on the exact program that you have.
Is it Photoshop version 4.0 (hopefully updated to 4.0.1), Photoshop CS 4, or Photoshop Elements 4.0?
If Photoshop Elements 4.0, then we can move your post to that specific forum.
Good luck,
Hunt

Similar Messages

How do you enlarge a picture in the edit workspace?

how do you enlarge a picture in the edit workspace?

ok I figured that out by incre
asing the % on the lower left
of picture

How do you open raw files (NEF from Nikon) in the edit workspace on Elements 8

how do I get raw NEF files (from Nikon) to open in the edit workspace of elements 8? I have windows 7 , and when I try to open NEF raw files from the viewer, it says cannot recognize the file type.
Thanks!

What is your camera model? Every camera has its own raw format and the raw converter must be updated to work with it. If your camera model was new in the past couple of years PSE 8 won't be able to open those files directly.

Use the Project Bin in the Edit workspace

This question was posted in response to the following article: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f626a494c12e28b3ab58- 7fed.html

what is the small icon upper right corner of fotos in project bin? It looks like a paint brush on a square. It's existence corresponds with an inability to change the foreground and background colors. thx.

Photoshop elements won't switch to the editor workspace from the organizer.

I can't edit more than one photograph per session when using Photoshop Elements 10.
When I first open up the organizer, I can select a photograph for editing and send it to the editing workspace.
However, when I try to edit a second photograph in the session, the editing workspace won't load. Even if I try closing Photoshop Elements altogether and reopening it, the editing workspace still won't load.
The only way to get the editing workspace to load again is to shut down my computer completely.
This has only started recently, and I am unaware of doing anything to cause this problem.
Has anybody come across this problem and how did they solve it?

Try making a direct shortcut for the Organizer and Editor. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
To launch, try right-clicking on the new desktop icons and choose “Run As Administrator” which often improves stability.
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files(x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. navigate to Program Files on 32 bit systems.

Editing Workspace in Premiere Pro CS4 not working.

When I start Premiere Pro all the workspaces work except the Editing workspace, all I see is this:
I am am using Windows 7 64 bit, what could be going wrong? I've already tried reinstalling Premiere once, can anyone shed any light on this problem?

Nevermind, I figured it out.

Problems importing Bitmaps into Editing Workspace

Hello, I Hope someone can help me.
I am using Photoshop Elements 6 and I have captured literally hundreds of BMP Files from a home made video.
I am trying to produce a number of animated sequences by removing the background to leave the subject matter which I then intend to overlay onto a new background in a series of frames.
The Problem I am having is that when I try to view the image in the Editing Workspace, the image resolution is distorted and stretched out horizontally!
The original file is 640 X 480 Pixels and around 900Kb. I am using Windows XP SP2 with 512MB Ram and 3.06Ghz Pentium 4.
I can view the thumbnails in the organiser OK but for some reason when I go to edit it appears as a thin line across the editing workspace at 1%. When I have tried to edit the Image Size it is showing the Document Size as being 0.18cm Wide by 0.14cm High with a resolution of 8902.125 !!!!pixels/inch when it should be about 72?
I have imported one of the BMP files into Fireworks and exported it as a PNG then edited it in PE with no problem.
I can also import JPEG files directly into PE and edit without any problems.
I have just spent over a hour on the phone to Adobe Technical Support who could not help me.
I have un-installed and re-installed and it has not solved the problem.
Has anybody got any ideas please so I do not have to re-save every file as a PNG or do you know of an alternative method of producing the animation?

Are you saying that the problem is with BMP files only?
Did you tried to edit the same file in other editors like Photoshop or any other??
Try to crop the same file in Organizer, if it works reset editor preferences and try again...
+ Ripple (VJ)

Elements 9 no edit workspace

Elements 9 Organizer can't open into the Edit Workspace on Mac/SnowLeopard - all new stuff, worked fine for a month

Try navigating to the Editor application file and placing it in the dock.

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

While in organizer window, I select edit photos and the elements workspace won,t open. Any solution

I am new to my recently installed elements 9-- I imported my photos from iphoto to the organizer--after I select a photo, and go to the fix section, I go to edit photos but the elements workspace won,t open, even though the timer dealy runs Any help?

If your Elements workspace is not loading then i think it is the problem with the Editor's preferences.
Try the following: http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Delete_the_Editor%E2%80%99 s

Edit the default workspace and actions for a group of computers?

I am a high school yearbook teacher, and I have a group of Windows 7 desktops running CS6. I want to replace the default workspace and actions on them to increase productivity. Where would I place the workspace and action files on the computers so they would be applied to all the users on the computer?
Thank you!

Hi,
I want to purchase a Macmini with SL Server and create a photo competition solution for a camera club. The solution needs to be able to accept uploaded images and the solution needs to let the user associate a set of images to a competition and from there the solution needs to make sure that the filename, format, size and embedded metadata is correct before storing and processing them further. Friends I have talked to say I need a classic CMS solution so I may need to investigate instead of my planned AppleScript/Automator solution.
Also - thank you for offering to develop, but I had kinda planned to do this myself to build some knowledge and also get to know the server better.
Anyone else using the SnowLeo server for a solution like this?
Kjell Are Refsvik
Norway

NetWeaver Developer Edition: Workspace Server Error every 2 Minutes

Hi there,
I installed SAP NetWeaver AS ABAP 7.02 SP6 32-bit - Developer Edition on Windows XP 32 Bit in a Virtual Machine with Virtual Box. My Host hase got 8 GB RAM and 4 x >3Ghz Processor and I gave 4GB Ram and 2 Cores to the Virtual Machine. 
The Installation was ok and the Systems works. But now I began to do some exercises (Add 2 Tables and some Types) and now Windows tells me after 2 Minutes I'm logged on Disp+Work.Exe --> an error occured. Then the SAP Workspace Server is rebooted and I can log on for the next 2 minutes. 
The Error Log tells me that the WorkSpace Process Died (?) but I dont know what to do... can anybody help? This is the Log:
 
 
trc file: "dev_disp", trc level: 1, release: "720" 
 
sysno 00 
sid NSP 
systemid 560 (PC with Windows NT) 
relno 7200 
patchlevel 0 
patchno 70 
intno 20020600 
make multithreaded, Unicode, optimized 
profile
testsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_testsap 
pid 3704 
Sat Nov 19 22:26:56 2011 
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC) 
length of sys_adm_ext is 588 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3704) [dpxxdisp.c 1268] 
 shared lib "dw_xml.dll" version 70 successfully loaded 
 shared lib "dw_xtc.dll" version 70 successfully loaded 
 shared lib "dw_stl.dll" version 70 successfully loaded 
 shared lib "dw_gui.dll" version 70 successfully loaded 
 shared lib "dw_mdm.dll" version 70 successfully loaded 
 shared lib "dw_rndrt.dll" version 70 successfully loaded 
 shared lib "dw_abp.dll" version 70 successfully loaded 
 shared lib "dw_sym.dll" version 70 successfully loaded 
 shared lib "dw_aci.dll" version 70 successfully loaded 
rdisp/softcancel_sequence : -> 0,5,-1 
use internal message server connection to port 3900 
rdisp/dynamic_wp_check : 1 
rdisp/calculateLoadAverage : 1 
 
Sat Nov 19 22:26:57 2011 
MtxInit: 30000 0 0 
DpSysAdmExtInit: ABAP is active 
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active 
DpIPCInit2: write dp-profile-values into sys_adm_ext 
DpIPCInit2: start server >testsap_NSP_00 < 
DpShMCreate: sizeof(wp_adm) 20000 (2000) 
DpShMCreate: sizeof(tm_adm) 4323912 (21512) 
DpShMCreate: sizeof(wp_ca_adm) 32000 (64) 
DpShMCreate: sizeof(appc_ca_adm) 32000 (64) 
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064 
DpShMCreate: sizeof(comm_adm) 556064 (1104) 
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0 
DpShMCreate: sizeof(slock_adm) 0 (96) 
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0 
DpShMCreate: sizeof(file_adm) 0 (80) 
DpShMCreate: sizeof(vmc_adm) 0 (1792) 
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192) 
DpShMCreate: sizeof(gw_adm) 48 
DpShMCreate: sizeof(j2ee_adm) 3920 
DpShMCreate: SHM_DP_ADM_KEY (addr: 08180040, size: 5055296) 
DpShMCreate: allocated sys_adm at 08180048 
DpShMCreate: allocated wp_adm_list at 08182F28 
DpShMCreate: allocated wp_adm at 08183020 
DpShMCreate: allocated tm_adm_list at 08187E48 
DpShMCreate: allocated tm_adm at 08187E70 
DpShMCreate: allocated wp_ca_adm at 085A78C0 
DpShMCreate: allocated appc_ca_adm at 085AF5C8 
DpShMCreate: allocated comm_adm at 085B72D0 
DpShMCreate: system runs without slock table 
DpShMCreate: system runs without file table 
DpShMCreate: allocated vmc_adm_list at 0863EEF8 
DpShMCreate: system runs without vmc_adm 
DpShMCreate: allocated gw_adm at 0863EF50 
DpShMCreate: allocated j2ee_adm at 0863EF88 
DpShMCreate: allocated ca_info at 0863FEE0 
DpShMCreate: allocated wall_adm at 0863FEF8 
DpCommAttachTable: attached comm table (header=085B72D0/ft=085B72D8) 
DpSysAdmIntInit: initialize sys_adm 
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL 
dia token check not active (3 token) 
MBUF state OFF 
DpCommInitTable: init table for 500 entries 
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm 
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80 
EmInit: MmSetImplementation( 2 ). 
MM global diagnostic options set: 0 
<ES> client 0 initializing .... 
<ES> InitFreeList 
<ES> block size is 1024 kByte. 
Using implementation view 
<EsNT> Using memory model view. 
<EsNT> Memory Reset disabled as NT default 
<ES> 1023 blocks reserved for free list. 
ES initialized. 
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE 
MPI: dynamic quotas disabled. 
MPI init: pipes=4000 buffers=159 reserved=47 quota=10% 
 
Sat Nov 19 22:26:58 2011 
rdisp/http_min_wait_dia_wp : 1 -> 1 
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654] 
***LOG Q0K=> DpMsAttach, mscon ( testsap) [dpxxdisp.c 12221] 
MBUF state LOADING 
DpStartStopMsg: send start message (myname is >testsap_NSP_00 <) 
DpStartStopMsg: start msg sent 
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off. 
DpMBufHwIdSet: set Hardware-ID 
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296] 
MBUF state ACTIVE 
DpWpBlksLow: max wp blocks in queue is 400 (80 %) 
MBUF component UP 
DpMsgProcess: 1 server in MBUF 
DpAppcBlksLow: max appc blocks in queue is 250 (50 %) 
 
Sat Nov 19 22:27:59 2011 
DpModState: change server state from STARTING to ACTIVE 
 
Sat Nov 19 22:33:38 2011 
ERROR => DpHdlDeadWp: W0 (pid 2012) died (severity=0, status=0) [dpxxwp.c 1522] 
Edited by: frankie2209 on Nov 19, 2011 10:59 PM
 
C:\usr\sap\NSP\DVEBMGS00\work --> file dev_wi shows an error:
 
M Sat Nov 19 22:28:10 2011 
M *** ERROR => alert/MONI_SEGM_SIZE not set. Monitoring switched off. [alxxmoni.c 10094] 
M {root-id=080027A0577D1ED184DEABD3CD8E66BD}_{conn-id=00000000000000000000000000000000}_0 
 
M 
M Sat Nov 19 22:28:11 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
A 
A Sat Nov 19 22:31:21 2011 
A GENER starting remote generation: SAPLSED6 (requested by W0). 
S 
S Sat Nov 19 22:33:18 2011 
S found spool memory service RSPO-ACTIONS at 11B99D88 
M 
M Sat Nov 19 22:37:18 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
M 
M Sat Nov 19 22:47:18 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
M 
M Sat Nov 19 22:56:51 2011 
M in_ThErrHandle: 1 
M ThIErrHandle: new stat of W1 is WP_SHUTDOWN 
M ThIErrHandle: I'm during shutdown 
M PfStatDisconnect: disconnect statistics 
M ThIErrHandle: entering ThSetStatError 
C CANCEL rejected, because there is no SQL statement active 
B db_sqlbreak() = 1 
M ThCallDbBreak: no sql statement active 
M ThIErrHandle: don't try rollback again 
M ThShutDownServer: shutdown server 
M ThCallHooks: call hook >Shutdown PXA< for event BEFORE_SHUTDOWN 
A Saving PXA statistics. 
A 540 programs loaded. 
A file pxanew opened. 
A 540 entries written. 
M ThCallHooks: hook >Shutdown PXA< o.k. 
M PfStatIndInit: Initializing Index-Record 
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf 
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
B dbtbxbuf: Saving TBX statistics: 
B dbtbxbuf: 40 object entries written. 
B Disconnecting from ALL connections: 
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 001 000 R/3 000000000 INACTIVE NO NO NO YES NO NO 000 255 255 20111119 222712 testsap
C Disconnecting from connection 0 ... 
C Now I'm disconnected from MaxDB 
B Disconnected from connection 0 
B statistics db_con_commit (com_total=97, com_tx=19) 
B statistics db_con_rollback (roll_total=0, roll_tx=0) 
M ***LOG Q02=> wp_halt, WPStop (Workp. 1 3304) [dpnttool.c 339] 
 
 
Edited by: frankie2209 on Nov 19, 2011 11:18 PM
 
Now I saw in syslog in SAPMMC that when I start the ApplicationServer "NSP" ive got an Error:
"Communications data: Service initialization failed" (Process Type RD, PID 03356 , Message ID S10 But message_server.exe and disp+work.exe are running green and i can log on into sap. and then after 1 minute the explaned error occurs.(WorkspaceProcess is restarted and sapsession breaks down - i have to log on again)
Edited by: frankie2209 on Nov 19, 2011 11:45 PM

Please check the value of the parameter PHYS_MEMSIZE in the file <Drive>:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_testsap . Set the value to 2048M. Also set the page file size to 10GB. Ensure you have space on disk to allocate space for paging.

Pass Username & Password to a Different Application in the Same Workspace

Can I pass the username and password from a main menu to open a different application in the same workspace. I'm trying to prevent the user from having to logon again. My main menu has links to different applications within the same work space.
Thank you

Anonymous - One way to do it (if you are using HTML DB's built-in session management) is to edit each application's authentication scheme and type in the same cookie name in the cookie name field (use any name you like). Another way is to use Single Sign-On.
Scott

Getting 'No Data found' Error when clicking the edit link to edit a record.

Application Express 4.2.0
Database: oracle 11g
Hi Guys
I am getting an error whenever i try to edit some of my entries by clicking the edit link, i have a composite Primary key attributes of three columns ( Budget Year ('YYYY'), Training Name('VARCHAR') and Emp Code ('VARCHAR')
Some records will load when i click Edit but some wont and return 'ORA-01403: no data found' error.
Any help will be appriciated.
Thanx
MATT

Hi,
Please create example about problem to apex.oracle.com and share developer login details to workspace.
Regards,
Jari

Activation of the activity fails u0096 no source files in the active workspace

Dear All,
Im working on a NWDI installation since last month. The NWDI server (NW2004s) has been installed and configured with the following parameters:
Some Details:
- Java Stack on SPS 12
- No complete Developer Workplace, we only use the Studio (SPS 12)
- OS: WIN 2003
- DB: Oracle 10g
- SDK: 2 SDK, Standard Edition x64 1.4.2_15
Installation Usages Types: DI, AS Java, EP Core, EP (EP for the Visual Composer)
Performed configuration steps:
- adaptation of VM parameter in the Visual Admin
- patched the NWDI Server and the Studio from SPS 9 to support package stack 12 + available single patches
- run the template installer => NWA with type DI Allinone run all post installation Steps for DI, CBS, CMS, DTR
- Oracle Parameters changed, User and Authorizations created and assigned (UME, J2EE Security roles, DTR => ACL List), SLD (Creation of a new Landscape), Configuration of the CBS with the VA
- Configuration of the Studio (SAP J2EE Engine (fill in the NWDI engine), Proxy Settings, Development Configuration Pool)
Development Steps for an example:
- Creation of a new software product (SLD)
- Namespace reservation on SLD => Application Context Root, Development Component Name
- Created a Domain and a Track on CMS
- Attached all Software components to the track (my own dc, SAP-JEE, SAP_Buildt, SAP_JTechs)
- Check-In the Software Components on Transport studio => CMS
- Moved the development configuration into Studio
- Created a ear- and a web-project => Display a JSP File (Its the same example like in the SAP Course TADM10)
- Check-in the activity under Open activities => Activate
My problem appears during the check-in phase in the studio. I was able to check-In the source files in to the inactive Workspace on the DTR, but the activation of the activity fails. (I thought that the build process runs automatically after the activation - also the movement from the source files from the inactive to the active workspace?).
I received no error message, but I cant find any source files in active workspace. The activity seems to be pending. I locate the request in the CBS, the request state is failed regarding the request type activate.
At the moment there is no separate runtime system assigned to the NWDI System.
Questions:
1. Have I forgotten an important configuration step?
2. Can I use the NWDI Server also as a runtime environment (DEV System)?
Please let me know if somebody has an idea.
Thanks.
Christoph

Hello Michael,
thanks a lot for your answer.
I found the following error messages in the request log:
Calculate all combinations of components and variants to be built...
 "xxxtest.com/math/calc/webdc01" variant "default"
 "xxxtest.com/math/calc/webdc01" variant "default" cannot be built. Activation will fail.
 INVALID dependency is declared to public part: default.
 [DC 247 variant "default"][SC 65 "xxxtest.com_TASCHENRECHNER_1"] using [PP default of DC 6 at Build-Time Dependency]
 "xxxtest.com/math/calc/eardc03" variant "default"
 "xxxtest.com/math/calc/eardc03" variant "default" cannot be built. Activation will fail.
 The required Build Plugin "sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication" IS UNKNOWN. None of the compatments contains a suitable plugin for this component.
 [DC 248 variant "default"][SC 65 "sanofitest.com_TASCHENRECHNER_1"] using [BP sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication]
Prepare build environment in the file system... started at 2007-09-04 06:13:54.316 GMT
Prepare build environment in the file system... finished at 2007-09-04 06:13:54.316 GMT and took 0 ms
===== Pre-Processing ===== finished at 2007-09-04 06:13:54.332 GMT and took 406 ms
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/webdc01" variant "default". The component is BROKEN.
ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/eardc03" variant "default". The component is BROKEN.
REQUEST PROCESSING finished at 2007-09-04 06:13:54.332 GMT and took 422 ms
The Build Log was empty.
Thank you in advance.
Best regards
Christoph

The Edit Workspace

Similar Messages

Maybe you are looking for