The emulator cannot start

Hi all,
I have already installed jdk , the latest release from oracle, and the wireless toolkit sdk ( Sun Java ME Platform SDK 3.0 ).
I created a helloworld project and when I run it then the emulator cannot start and there was an error in the error output saying that device cannot be contacted , device did not register in time.
During the compilation there was also warning saying that the jad and the jar will be modified in the future.
So what should I do to make the emulator running ?
Thank you very much indeed
PS : my computer is windows xp sp2 , pentium 3 ( 1 GHz ) , RAM : 128 M

Hi ,
Did  you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • The package name The Gallbladder-4.itmsp contains an invalid character(s).  The valid characters are: A-Z, a-z, 0-9, dash, period, underscore, but the name cannot start with a dash, period, or underscore

    I have an iBook on itunes and I am trying to upload a new version of the book. I am following the workflow through iBooks Author and when I fell out all of the infromation for the package on iTunes producer i then hit the deliver button and I get the following error message:
    The package name The Gallbladder-4.itmsp contains an invalid character(s).  The valid characters are: A-Z, a-z, 0-9, dash, period, underscore, but the name cannot start with a dash, period, or underscore.
    As far as I can tell the file that is being referenced does not meet the criteria axpressed in the erro message and in fact that file has been created by iBooks Author so one would think there shouldnt be an error.
    I also get the following to error messages:
    Apple's web service operation was not successful
            Unable to authenticate the package: The Gallbladder-4.itmsp
    Would ove any help.
    Thanks,
    Jeff

    Thank you so much for your help.
    For anyone that would like to check out this book it can be downloaded at:
    https://itunes.apple.com/us/book/the-gallbladder/id598317335?ls=1
    Please check out our free medical education blog by Jeffrey Eakin using iBooks Author at:
    http://free-medical-education-ibooks-author.blogspot.com

  • X61 - SD Card Reader - (Code 10 - the device cannot start)

    Hi.
    One of our users in RTX Telecom Denmark have a problem with his X61.
    Everytime he insert a SD card to the reader it comes with this error message:
    Code 10 - the device cannot start. 
    We have tried all the Windows hotfixes, reinstalling the drivers from:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67971
    restarting the machine, but nothing helps.
    Do you know anything about this issue.
    Thanks in advance.
    Best regards,
    RTX Telecom A/S
    Jesper Breum Larsen
    Trainee 
    Stroemmen 6
    DK-9400 Noerresundby
    Web: www.rtx.dk 
    Message Edited by RTX-IT on 02-13-2009 09:20 AM

    I have now tried with the preload without any luck. Or that is not completly true, I could put a 1 gB Kingston card in the computer and it would pop up. But it also freezed the computer from time to time.
    If I took the card again after a freeze, the computer went back to normal.
    But out of 6 SD cards, that was the only one I managed to get working.
    I tried all kind of sizes:
    64 mb (no luck)
    512 mb (no luck)
    1 gb (kinda worked - sometimes freeze)
    2 gb (no luck)
    4 gb (no luck)
    8 gb  (no luck)
    So now I have called Lenovo support and they will come and fix it for me. 

  • Error 244: The DataFinder cannot start due to an internal error.

    I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
    "The DataFinder cannot start due to an internal error.
    (244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
    I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
    Solved!
    Go to Solution.

    Hi xcontradictorx,
    It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures. 
    If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear). 
    If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service. 
    Try the following: 
    1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run 
    2) Delete the DataFinder entry 
    3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup 
    4) Reboot 
    This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder. 
    One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
    Patrick H | National Instruments | Software Engineer

  • Error: The DataFinder cannot start due to an internal error

    Hello,
    I get the same error message every time I reboot my Win 7 PC:
    "National Instruments DataFinder"
    "The DataFinder cannot start due to an internal error."
    "Please wait till the National Instruments DataFinder Index Service is running and try starting the DataFinder again, or reboot your computer. "
    I tried finding a DataFinder Index Service in the Control Panel --> Admin,istrative Tools --> Services, as mentioned in this post http://forums.ni.com/t5/LabVIEW/Error-244-The-DataFinder-cannot-start-due-to-an-internal-error/td-p/...,
    but there was none such listed service:
    I cannot find any mention of a DataFinder or a DataFinder Index Service anywhere else on my PC. Can you please help to find out where this error is coming from and how to fix it? As far as I am aware, I do not use this DataFinder. Thanks!
    Regards,
    Brandon

    Hello BrandonVonk,
    The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
    Hope this helps,
    Siana A.
    Application Engineering
    National Instruments

  • Product extension oracle.odi could not be loaded. The product cannot start.

    Hi everybody!
    i hava a problem in running odi on IBM AIX, when i write ./odi.sh. the odi can not start ,
    "Product extension oracle.odi could not be loaded. The product cannot start." This is error message, why?
    by the way IBM AIX's version is 5.3, ODI'S version is ofm_odi_generic_11.1.1.3.0_disk1_1of1 ,It is correct?
    Pleass help me to solve it!

    user10795526 wrote:
    hi,
    Can you tell us how to solve this iusse??Wait for Oracle to certify the software on the platform in question. You can run the ODI Server components but will have to run Studio on a supported platform.

  • Why the listener cannot start? All seems OK

    Why the listener cannot start? It seems no problems.
    [oracle@localhost database]$ lsnrctl status
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-JUL-2009 10:46:33
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.109)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    [oracle@localhost database]$ lsnrctl start listener
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-JUL-2009 10:47:00
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.109)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Linux Error: 104: Connection reset by peer
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.109)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    [oracle@localhost admin]$ cat listener.ora
    # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = db1)
    (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
    (SID_NAME = db1)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.109)(PORT = 1521))
    [oracle@localhost admin]$ cat tnsnames.ora
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    DB1 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.109)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = db1)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    [oracle@localhost admin]$ ifconfig
    eth0 Link encap:Ethernet HWaddr 00:13:21:C7:21:F1
    inet addr:192.168.0.109 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::213:21ff:fec7:21f1/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:11748 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3354 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:792680 (774.1 KiB) TX bytes:155584 (151.9 KiB)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:8335 errors:0 dropped:0 overruns:0 frame:0
    TX packets:8335 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:3326132 (3.1 MiB) TX bytes:3326132 (3.1 MiB)
    peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:11747 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3354 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:839608 (819.9 KiB) TX bytes:225672 (220.3 KiB)
    Interrupt:17
    vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:3354 errors:0 dropped:0 overruns:0 frame:0
    TX packets:11748 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:155584 (151.9 KiB) TX bytes:792680 (774.1 KiB)
    xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:11618 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:614983 (600.5 KiB) TX bytes:0 (0.0 b)

    Thank you
    You are right. Doing according to you conduct, the Listener is started. But EM console cannot be started any more.
    How to do next?
    [oracle@host admin]$ emctl start dbconsole
    TZ set to US/Eastern
    Exception in getting local host
    java.net.UnknownHostException: host: host
    at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
    at oracle.sysman.emSDK.conf.TargetInstaller.getLocalHost(TargetInstaller.java:4977)
    at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3758)
    Exception in getting local host
    java.net.UnknownHostException: host: host
    at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
    at oracle.sysman.emSDK.conf.TargetInstaller.getLocalHost(TargetInstaller.java:4977)
    at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3758)
    OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_null_db1 not found.
    Edited by: junez on Jul 18, 2009 9:05 AM

  • PhotoshopElementsEditor.exe - system error dialog box states"The program cannot start because OnOneToolBox2.dll is missing from your computer. Try reinstalling the program to fix problem"  I have uninstalled, then reinstalled both my Elements 10  and my O

    ninstalled, then reinstalled both my Elements 10 and my OnOne Apps. several times, but keep getting the same message. please help me with this.ninstalled, then reinstalled both my Elements 10 and my OnOne Apps. several times, but keep getting the same message. please help me with this.

    Oop I finally found the answer myself from the onOneSoftware.com website in the support area.  the answer is :
    Ononecorefoundation.dll Is Missing From Your Computer- Error Message
    This error can occur if there are older plugins lingering in your plugins folder of Photoshop after installing Suite 8 and trying to launch Photoshop. To correct the error go to your: [Local Disk (C:)]\Program Files\Adobe\Adobe Photoshop CSx 64bit\Plugins:Delete     
    PS:   I only deleted the old obsolete OnOne plugins,and left their  newer plugins, That worked and now Elements 10 is working just fine

  • Cannot start the source application for this object - Embedded PDF in Excel 2007

    I am having a real issue which unfortunately is intermittant and I cannot pinpoint what is causing the problem. Basically I am inserting a PDF object into an Excel worksheet and immediately after I insert it, it will open fine. If you click off into another cell and save the sheet, then try to reopen the embedded PDF, you get the error "cannot start the source application for this object".
    Any help would be very much appreciated! Has anyone else run into this?

    I got that problem with one of my client after updating from Adobe  Reader 8.2 to 9.3.1. Excel version was 2002 and not 2007 but this is Adobe problem.
    Check that registry key for you Acrobat  Document key points to right AcroRead32.exe path at  HKEY_CLASSES_ROOT\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32
    of  whatever key points to your Acrobat Document.
    I used  Sysinternals Procmon to monitor registry activity and found a line and  opened that registry location and found out Adobe Reader 8.0 path there.
    9:55:56,9021789     EXCEL.EXE    3236    RegOpenKey     HKCR\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32     SUCCESS    Desired Access: Maximum Allowed
    I have seen that Adobe  Reader 9.3 doesn't update that registry and leaves Adobe Reader 8.0  values there. Same problem may be in other upgrade scenarios too.
    In addition to that my Windows 7 with Office 2007 that has never had anything but Adobe Reader 9.x versions didn't had anything on that registry location and it gave me same "cannot start the source application for this object" error. Putting that path "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" to LocalSever Default value fixed that too. Maybe Adobe should do something with this issue?

  • Cannot start JNLP applet on IE 9 64 bits (replicated)

    Hello,
    I made a post on the "Applets" section of the forum, but after further search I think it should have been here, so I leave the link
    Cannot start JNLP applet on IE 9 64 bits
    Ty
    Cad
    To any moderator, feel free to delete this thread and move the one posted above to this section

    1) Make sure you have correct version of JRE installed. Need 32 for 32 bit browser and 64 bit otherwise.
    Check list of installed plugins in IE to see if java plugin is listed.
    2) Make sure java plugin is enabled for IE in the Control Panel.
    If UAC is on then you need to run Java Control Panel as administrator for settings to take effect.
    3) Create small bat file to launch IE:
    set JPI_PLUGIN2_DEBUG=true
    <path-to-ie>\iexplore.exe
    Close IE and launch using this file. Try to open any applet, you should see window with trace log. Does it mention any errors?
    Please paste content here if you need further help.

  • Microsoft Teredo Tunneling Adapter cannot start (code 10)

    Hi guys,
    I have a yellow *!* mark on my Microsoft Teredo Tunneling Adapter, and when I attempt to install it manually, it says it is already installed, but the driver cannot start (CODE 10). I'm also having an IP problems with my computer [Windows has detected
    an IP address conflict], but I lack the knowledge and experience to know if this two problems are connected.
    I've tried 2 device-updating programs (DriverTuner by LionSea, Driver Booster by IObit), yet neither of them ware able to help me .
    If ANYONE out there have a solution for me, please submit it!
    [Windows 7, HP]

    Hi Ziv_Ger,
    Regarding IP conflicts, please first  use the Network troubleshooter,
    For more information, please refer to the following article.
    Get help with "There is an IP address conflict" message
    http://windows.microsoft.com/en-hk/windows/get-help-ip-address-conflict#1TC=windows-7
    After that, try to update the driver again.
    Fix: "This device cannot start" Code 10 error in Device Manager in Windows
    http://support.microsoft.com/kb/943104
    Best regards,
    Fangzhou CHEN

  • Cannot start instance of another server : correction

    Correction : To the moderator of the newsgroup, please delete my other post with
    the subject 'Cannot start instance of another server'.
    In the console of WLS 6.1 SP3 on HP-UX, I have created another instance of a server
    I called 'another_of_myserver' (in addition to the default myserver). When I
    try to start another_of_myserver, it won't start and gives the following error
    ============================
    <Nov 26, 2002 1:32:04 PM EST> <Error> <NodeManager> <Could not start server 'another_of_myserver'
    via Node Manager - reason: '[SecureCommandInvoker: Could not create a socket to
    the NodeManager running on host 'localhost:5555' to execute command 'another_of_myserver',
    reason: Connection refused. Ensure that the NodeManager on host 'localhost' is
    configured to listen on port '5555' and that it is actively listening]'>
    ===========================
    What does it mean and how do I get it to start ?
    Thanks for any help or suggestion.

    Athooya,
    If you do not specify a weblogic.nodemanager.listenPort or
    weblogic.nodemanager.listenAddress they will be set to the default.
    So the listenAddress will be localhost and so not matching exactly the address
    used by the remote
    start. Please try to set the listen address of the Node Manager when it is
    started. You can specify the address on which the Node Manager will listen for
    requests from the
    Administration Server with the following parameter: -Dweblogic.nodemanager.listenAddress=host
    where host is the DNS name or IP address of the machine where the Node Manager
    is started.
    The default port on which the Node Manager will listen for requests
    from the Administration Server is 5555. You can change this with the following
    startup parameter:
    -Dweblogic.nodemanager.listenPort=port
    Refer to
    http://edocs.bea.com/wls/docs61/adminguide/remotestart.html for additonal information.
    Chuck Nelson
    DRE
    BEA Technical Support

  • "Cannot Start Video Chat" error when trying to do video conferences

    Ahoy!
    I've recently upgraded to a new still camera that unfortunately doesn't work with iChatUSBCam, so I invested in a nearly-new iSight to use with my PowerMac G4 instead. Although one-way video chat conferences work fine, I keep getting the error "Cannot Start Video Chat" whenever I try to do a video conference.
    The full error message reads:
    "*Cannot Start Video Chat*
    Your computer is not capable of initiating a multiperson video chat.
    Click Text Chat to invite the selected people to chat."
    There are no error codes or any other text in this message. The available buttons are the purple ?, 'Text Chat' or 'Cancel'.
    I have tried this on both my 1.25ghz PowerMac G4 and my 1.33ghz PowerBook G4, and my friends I am trying to chat with have tried to initiate the conference on their 2.16ghz Intel Core Duo MacBook and MacBook Pro, only to receive the same messages too.
    When doing a one-way videochat, the + button to add more people to the conference is greyed out for all of us as well. We all display the video conference button (camera with the extra pages behind it) next to our names on our buddy lists though, so our computers all believe we're capable of it!
    When clicking the ? button on the "Cannot Start Video Chat" dialogue, it brings me to the help page that tells me:
    +"To join a multiperson video conference, you need any G5 computer, or a 1 GHz single processor G4, or a dual processor 800 MHz G4, and a broadband connection to the Internet.+
    +To host a multiperson video conference, you need any G5 computer, or a 1 GHz dual processor G4. In addition, you need an Internet connection that supports a minimum download bandwidth of 384 Kbps, and a minimum upload bandwidth of 384 Kbps."+
    Both of my machines are above 1ghz G4s, so according to this help file, it shouldn't prohibit me from at least joining a conference when I'm not the host, but both of my Intel-based friends get the same message when trying to host as well. We are all on respectable Broadband or Cable internet connections, so that shouldn't limit it!
    Anyone got any ideas what the problem is and how to fix it? I see no reason why this shouldn't work!
    Thanks!

    Hi
    First have you all set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
    In ichats prefs click on video and change bandwidth limit to NONE.
    Restart iChat.
    Do a speed test on all sides and tell us the UP AND DOWNload speeds http://www.speedtest.net/
    Tony

  • Keep beeping, cannot start, after installing security update. Please help.

    I just apply the security update today in my MacBook (aluminum), but then the laptop cannot start.
    When starting, it beeps 3X, pauses, then beeps 3X, pauses, and so on - never stops.
    I press the power button to stop, but when pressing the power button back on, this keeps happening.
    Does somebody also have this kind of issue? What should I do?
    Sorry if I may have repeated other reports, I just cannot find here. I googled a bit and somebody tells that beeping 3X relates to graphics device problem. What should I do with this?
    Thanks

    Hi T,
    Yes, that is the key we all are getting while the announced shows the key first presented in the update released as 2010-001, back in January. Nothing else reported besides the SHA1 diff.
    I am sorry to tell you but this issue would hardly, if not ever, be related to the update. It seams to be the hardware fault in fact, test each memory in each slot, one at a time trying to boot the 4 times, 3 in the case, you are already up with this mem/slot combination.
    Good luck.

  • I cannot start my MacBook Pro. What can I do?

    Hello guys,
    since today I have problems with my MacBook Pro, which I bought in May 2012. I cannot start my Mac. When I push the On-button the apple logo appears as normal but nothing more happens. Sometimes I can also logg me in, but the Mac cannot start and boot up. I don´t know whats the problem, yesterday it worked normally but then I installed a new Itunes version and let it load overnight. Today this problem appeared. What can I do?
    I hope somebody can help me.
    Greetings from Germany
    Jenni

      Grey Screen and spinning wheel at startup
    http://support.apple.com/kb/PH11044
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Reinstall OS X
    http://support.apple.com/kb/PH10763?viewlocale=en_US
    Additional Steps
    http://support.apple.com/kb/PH10929

Maybe you are looking for