The end of my IMAP experiment

Well, after getting it set up to work well, I thought things were going swimmingly with IMAP finally. Gradually I merged more and more accounts so that they were received in my IMAP mailbox and was raving to my friends and co-workers the last couple of weeks how great it was and how cool the synchronization was - like magic.
Then tonight what I dreaded would happen happened.
I turned on one of my computers and thought, "That's odd - there should be about 80 emails in my Inbox, but there are only 2".
I turned off that computer and rushed upstairs to my iMac and saw all 80 and thought "whew" and rushed to copy them to an "On My Mac" folder. But it was too late. Mail said it couldn't copy them and "poof!" they suddenly vanished from the Inbox on my iMac too.
So I checked every folder on all my computers and in webmail online - trash and everything. They were gone from the server for sure.
I luckily had one more computer (I definitely have too many computers) and had set it up for IMAP last week so it still had everything except the last few day's email on it. I immediately took that computer "off line" and backed up those emails. Then I put it back online and "copied" the emails from the backup folder to the IMAP Inbox. And also copied everything from my IMAP sent folder to "on my mac" to be sure I had everything.
Then I turned off IMAP everywhere and re-enabled my POP3 account and downloaded the mails from the server.
I decided I'm not going through that again and am giving up on IMAP. Too dangerous for my taste!
I'm back to looking for synchronization options for POP3. At least with POP3 my emails won't mysteriously vanish simultaneously from multiple computers at once!
doug

Hi Inicole. You’re welcome.
No, it’s not that you were unclear. It’s that I was replying to the OP, not to you (see the header of my post). If you’re talking about something else that’s not what’s being discussed in this thread, then it should be no surprise that what others say here doesn’t apply to you. Actually, what you’re doing here is called threadjacking, and goes against the Terms of Use of these forums:
Threadjack—To wrongly post a dissimilar issue in an existing discussion, distracting from the true focus of the discussion. If your issue has any significant difference from a similar topic, then you're probably better off posting a new topic to focus attention on your particular issue.Hence, please either find a thread that really discusses the same problem, or start a new topic to properly discuss your problem in its own thread.
EDITED: It looks like you’ve already found a thread discussing your problem and it’s solved now...

Similar Messages

How can I use "write to spreadsheet" during the data is taking but not the end of all the loops

Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KL

KL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

What specs. do I need to look at to not get chirping sounds at the end of a sound fi

Hi all,?I am trying to run an experiment for a doctoral project and I need some help. I have a really expensi've sound card called the lynx one that I have no problems with. Recently my school purchased the soundblaster x-fi extreme audio sound card because we are testing to see if we can use a cheaper sound card and get the same results. However, at the end of certain sound files, we get a chirping sound from the soundblaster which is the end of the clip being cut off. It is like the release time of the file or something, but we can't mess with the cli
ps.
Also it doesn't do that for the lynx one so we know that some sound cards will not allow you to hear the cut off. Any advice on what specifications to look at etc to not hear the chirping sound but still getting a sound card that isn't 500 dollars? Thanks!

This one is good:
http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter

Why, at the end of a podcast, does it automatically start playing my music?

Hi
On a 4S, when I used to get to the end of a podcast it used to go to the next. For a while though it has automatically strarted playing my music from the 1st song. The result is me quickly going mad and hating that song!
Why is it doing this and how can I stop it?!!
Thanks

Hi Jeff,
First I am not sure if your wife has multiple episodes of the same podcast she wants to listen to or if she has many short individual podcasts. Please note that below my suggestions differ depending upon which situation fits her problem.
I do not have a 1G Nano but I do have an older iPod Mini which I suspect behaves in the same way as your wife's older Nano. I, too, was frustrated in having podcasts play one at a time. I have a couple of podcasts that have daily episodes and each of those episodes used to stop at the end and I had to select the next one to listen to it. This was frustrating because I usually build up a week's worth before getting around to listening to them. Then, by accident I stumbled upon a solution for the Mini. The podcasts also showed up under albums (and artists too) so I set my iPod to play the complete album, selected the podcast I wanted to listen to and was able to listen to all the episodes in that particular podcast. On rare occasion the order of the episodes might get out of chronological order.
If your wife has multiple individual podcasts then she might want to try setting up a playlist with all the individual podcasts she wants to listen to and go with that. Experiment with the playlist idea and the shuffling options of the iPod to get multiple podcasts to play uninterrupted.
I must admit that since I got the Touch for my birthday this winter I don't use the mini as much and am a bit rusty with all the settings of that iPod. My Touch will play through all unlistened to episodes of a particular podcast but will still stop at the end of each different podcast. I have not had the need to do anything drastic on the Touch since most of my individual podcasts are 1 to 2 hours long which is ample time for me to get in a good, long walk!
Hope this helps you and your wife with her 1G Nano.
Sue

The starting quote marks at the end of a line in my epub file are separated from the words quoted.

The starting quote marks at the end of a line in my epub file are routinely separated from the word quoted which appears on the next line. The formatting contractor accurance.com who prepared this epub file tells me that this is a feature of Adobe Digital Edition 2.0 and that there is nothing they can do to correct this. Are they correct, or else how can this problem be overcome?

I'm not sure about buying css style sheets.
You don't need one for each book; if you want to have a series of books all with the same general format,
then they should all use the same style sheet on a given device, but maybe different style sheets for different devices.
All the books will then have one consistent look on a given device, and a different consistent look on another device.
ADE only runs on PCs and Macs. There are lots of different ereader software apps out there for running on different devices.
For a dedicated device, you are stuck with the reader the device provides.
For tablets you can download different ereader apps, for example Bluefire (my favourite, ios, Android), Aldiko (android) and DReader and DL Reader (windows RT).
I don't know if the readers/apps are derived from the same root as ADE in any way and likely to show similar bugs.
If it is not DRM, you should certainly try on Calibre, which is the most popular (free) ereader app for computers.
If you care to create a very short non DRM extract (complete with css) and post it somewhere on the web I'll have a quick look.
If you have inclination to get more involved yourself,
there is free software called sigil (https://code.google.com/p/sigil/) that will help you get off the ground and experiment.

How do I create a table of 3 data elements for each trial and have it updated instead of waiting until the end of the program?

I am trying to record 3 pieces of data, all (software) timing in ms (in U8 integers). I managed to finally get each data in the right column but now it doesn't record anything in the table and it doesn't update the numeric indicators during the experiment like it should. I can't figure for the life of me what I did wrong. I know at least the trial part of the program works, but so far the data recording part is giving me a headache.
Thanks
Attachments:
BETACRT.vi ‏241 KB

Why it is not reporting the data is easy; fixing the program may not be. LabVIEW uses a dataflow paradigm. This means that no part of the program executes until all of its data inputs are availble. In your case the table and the array functions driving it are fed by outputs from the outer while loop. Thus no data gets to the table until the while loop has finished executing (which is at the end of your experiment). One possible approach would be to store the data in a shift register and move the table inside the loop.
Many experienced LV programmers try to avoid or minimize the use of sequence structures and local variables to read and write to/from front panel objects. We use a state machine which is a while loop with a case structure. Queues can be u
sed to pass data between the user interface and the data acquistion loops. This subject is too involved to be handled in a brief posting, but if you search the archives and examples you can learn more.
Also, be aware that software timing can be problematic if you are using a desktop operating system. If the OS decides to check the net for software updates or something you could have large discrepancies in your timing. These might be rare, but there is no reliable way of detecting them. I have built several systems similar to what you seem to be trying to do and have never been successful with software timing.

Extra characters at the end of each servlet response

I am attempting to develop a servlet that sits between a server and a browser, and simply martials arguments to send to the server, and then forwards responses to the web browser. When working with Weblogic 5.1 sp 11, things worked fine, except that an extra new line was added to the end of each response. I am now testing against Weblogic 7.0, and instead of a new line the characters "null" (not including the quotes) are added. I have tried to experiment to see if anything I have written or control is causing these characters to be sent to the client, but as far as I can tell there is nothing there. The I write my final character, close the ouput stream, and the client recieves bytes I did not send. Has anyone else experienced this? Anyone have ideas on how to fix this problem. Thanks for any input,
Nathan

Yes! There are advantages with jar files.
The jar tool combines multiple files into a single JAR archive file. jar is a general-purpose archiving and compression tool, based on ZIP and the ZLIB compression format. However, jar was designed mainly to facilitate the packaging of java applets or applications into a single archive. When the components of an applet or application (.class files, images and sounds) are combined into a single archive, they may be downloaded by a java agent (like a browser) in a single HTTP transaction, rather than requiring a new connection for each piece. This dramatically improves download times. jar also compresses files and so further improves download time. In addition, it allows individual entries in a file to be signed by the applet author so that their origin can be authenticated. The syntax for the jar tool is almost identical to the syntax for the tar command. A jar archive can be use as a class path entry, whether it is compressed or not.
If u require more help on jar file, you can go to the Java Tutorial available on java.sun.com

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

As Roger said, iCloud does not support external POP accounts.
However, you can configure your Max to directly receive your Yahoo! email by following these instructions:
http://hints.macworld.com/article.php?story=20110208153256491
Note that this works (for me) without a Yahoo Plus! account - and make sure that you scroll down to the comment at the end of the article which has all of the correct settings in one place.
Cheers,
Rodney

What does the new Nano do at the end of a podcast?

My wife has a 1G Nano that she listens to podcasts on while she runs. It has the annoying behavior of stopping playback when a podcast finishes, instead of going on to the next podcast. Some of her podcasts are only 5 minutes long, so this means she has to fiddle with it every 5 minutes or so to get the next podcast playing.
Can someone with a new Nano please tell me what happens if you have several episodes of a podcast on it and you start playback? Does it still stop after the end of each episode or does it go onto the next one? Does it do the same if it's in shuffle mode?
We tried to work around it by creating a smart playlist containing only podcasts, but I think this model has something wrong with it. Sometimes podcasts don't show up in the playlist, and sometimes podcasts show up in the playlist but not in the Podcast menu, and the syncing gets all messed up.
Thanks!

Hi Jeff,
First I am not sure if your wife has multiple episodes of the same podcast she wants to listen to or if she has many short individual podcasts. Please note that below my suggestions differ depending upon which situation fits her problem.
I do not have a 1G Nano but I do have an older iPod Mini which I suspect behaves in the same way as your wife's older Nano. I, too, was frustrated in having podcasts play one at a time. I have a couple of podcasts that have daily episodes and each of those episodes used to stop at the end and I had to select the next one to listen to it. This was frustrating because I usually build up a week's worth before getting around to listening to them. Then, by accident I stumbled upon a solution for the Mini. The podcasts also showed up under albums (and artists too) so I set my iPod to play the complete album, selected the podcast I wanted to listen to and was able to listen to all the episodes in that particular podcast. On rare occasion the order of the episodes might get out of chronological order.
If your wife has multiple individual podcasts then she might want to try setting up a playlist with all the individual podcasts she wants to listen to and go with that. Experiment with the playlist idea and the shuffling options of the iPod to get multiple podcasts to play uninterrupted.
I must admit that since I got the Touch for my birthday this winter I don't use the mini as much and am a bit rusty with all the settings of that iPod. My Touch will play through all unlistened to episodes of a particular podcast but will still stop at the end of each different podcast. I have not had the need to do anything drastic on the Touch since most of my individual podcasts are 1 to 2 hours long which is ample time for me to get in a good, long walk!
Hope this helps you and your wife with her 1G Nano.
Sue

Unsightly "I" at the end of a line.

Though it strikes me as unsightly to have the pronoun "I" at the end of a line (whether begining a sentence or used inside of one), is this generally considered a faux pas in text layouts? Thank you.

I don't know if it's generally considered a typesetting faux pas, but it personally doesn't bother me unless the lines above and below it are shorter than the line ending with "I," making the "I" float out in space by itself. In that case I would break it down to the next line, but I don't know if there's any hard-and-fast rule about it. You might want to experiment with your Paragraph Options - I think "Balance Ragged Lines" would get rid of that unsightly "I" in most cases.

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Replicating the effects at the end of the tv show 24

I am certainly asking a lot here; but here it goes. Where should I start if I want to integrate 9 shots of footage into boxes on the screen. The boxes change size to partially fill the screen as emphasis is placed on certain portions of the footage. This is similar to the effect seen at the end of most episodes of the TV series 24. i.e. One box has Jack shooting and yelling, one has the president at his desk looking at a report, one has Kim Bauer eating dinner, etc.
Can I do this in Final Cut (or media 100 for that matter)?
The editing suite that I have available has Final Cut, Media 100, Motion, and After Effects; this is for a PSA spot and we're thankfully able to use university equipment.

stack up the clips one on top of each other, double click the clip on v1 then, in the viewer, click the 'tablet' on the right, select 'image and wireframe'. Go to the viewer and select the 'motion' tab and then change the scale values to change the size of the clip in the canvas. You can then drag the clip to any position in the canvas.
Repeat for each of the other stacked clips.
Scale and motion are both keyframeable, just experiment.
Dave

Websites with # at the end

I've noticed that none of my browsers open any websites which have a "internal" pop up in them, like websites which have a # at the end. I know there is something wrong with the settings on my laptop because when I tried it on my sister's MacBook Pro they work perfectly fine.

indoscot,
if you transferred all of your data from your old MacBook Pro to your current MacBook Pro, and your old MacBook Pro had the same problems, then that could suggest that if there were problems with the browsers’ property list files on your old MacBook Pro, that they were also transferred to your current MacBook Pro.
As an experiment to see if a cloned property file could be the culprit, try this:
1. Exit Safari.
2. Open Terminal (it’s in the Utilities subfolder of the Applications folder) and run the following command:
mv ~/Library/Preferences/com.apple.Safari.plist ~/Desktop
Keep Terminal open.
3. Open Safari again, and make sure that the “Block pop-up windows” checkbox in Safari’s preferences is not checked.
4. Go to a site where a pop-up window has appeared in your sister’s browser, but hasn’t appeared in yours. Does a pop-up window appear in your Safari now? If yes, go to Step 5A. If no, go to Step 5B.
5A. If it appears now, delete the old com.apple.Safari.plist file on your desktop, and change the rest of Safari’s preferences to your liking. Skip Step 5B and go to Step 6.
5B. If it still doesn’t appear, exit Safari and then run the following commands in Terminal:
rm ~/Library/Preferences/com.apple.Safari.plist
mv ~/Desktop/com.apple.Safari.plist ~/Library/Preferences
6. Exit Terminal.
Did you go through step 5A or step 5B?

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

The end of my IMAP experiment

Similar Messages

Maybe you are looking for