The "enter" key on the numeric keypad of my external mac keyboard has stopped working. Help!

The "enter" key on the numeric keypad of my external mac keyboard has stopped working with my Macbook pro. If I plug the keyboard into any other computer, that entier key works fine. I'm using a standard Mac wired keyboard, & it's worked fine for 2 years now. Help!
This is the keyboard I am using: http://store.apple.com/us/product/MB110LL/B/apple-keyboard-with-numeric-keypad
Not sure what I might have accidentily done to disable the enter key. (The normal enter key works fine, just the one on the numeric keypad.)
Thank you for your help.

Hi there,
Do you have any resolution to this problem in the end? Because it happened to me an exact same thing.
Please share if you have found a solution to your problem. I also cannot think of what I did wrong to disable the Enter key.
Best Regards,
Jeffri

Similar Messages

TS1381 the enter key on my numeric keypad brings up the Start menu in Windows 7

The enter key on my wired iMAC numeric keypad is not working correctly - it brings up the Start menu in Windows 7. I am running Windows 7 through Parallels. Any ideas how to switch it back?

I figured this out on my own. I had clicked a key in DoubleClick that was causing this. I unchecked it and now my enter key works normally.

How do I remove the enter key on the numeric keypad as a command key?

How do I remove the enter key on the numeric keypad as a command key. I want to use the enter key as a return key.

Don't. It will void the warranty. Take is to an Apple store or an AASP and have them do it.

Pressing the enter key on the keyboard

Need to know the trigger or the way to attribute code to pressing de enter key on the Keyboard!!!???
Thanks!!!!!

Hi Carlos,
By default, the ENTER key takes the cursor to the next navigable item in the block.
To override this default behaviour it is necessary to modify the forms resource file to revise the key mapping details.
Refer to article 209671.1 on Metalink: How to Change / Customize the Key Mappings for 6i and 9i Webforms?
Read the section 'B: Mapping for ENTER to fire KEY-ENTER-TRIGGER over the Web'
Regards,
Monica

I'm using LR 5.6. The Enter key should increase the exposure but it increases Contrast instead. How can I make the Enter key adjust the exposure?

Hello
As explained in the heading, I'm using LR 5.6 on a PC (Win 7). The Enter key should increase the exposure but it increases Contrast instead. How can I make the Enter key adjust the exposure, as it should? I have reset the settings to Default in the Develop module but to no avail. Please help! Thanks.
Kind Regards
Farrukh Hyder

I am not aware that the ENTER key should increase exposure, and it certainly does not increase exposure (or any other slider) on my Lightroom 5.6 (Windows 7)
If you click on the word Exposure, then the + and - keys increases or decrease exposure by 0.1 or -0.1

My Apple Bluetooth keyboard has stopped working. The top row of keys works but the rest of the keys do not. I was carrying this in my computer bag without turning it off and that is when this started.

My apple bluetooth keyboard has stopped working. The top row of keys works and the iPad sees the bluetooth keyboard (the bluetooth icon is active) but the other keys do not work. For the past coupld of days I have carried my keyboard in my computerbag without turning it off and I am thinking I have done something to make the letter keys to stop working. Two days in a row I did turn on the music as I carried the computer bag into work so I know that some keys were being activated.

*UPDATE*
I have been able to use the Zoom function to zoom in and the keys on the top row no longer are in the non-responsive strip of area.

When i sync my phone it goes through all the photo's then a window pops up which says that itunes has stopped working and the closes itunes down, i have tried syncing a few times and it just keeps doing the same but says windows MAY send a solution, help

i am getting really frustrated with syncing and updating my iphone, everytime i sync when the photo's have sunk a window pops up and says itunes has stopped working and closes the programme, it also says that windows may send me a solution but they never do !!!! please can someone help me

Hello Suzanne,
Thank you for providing the details of iTunes unexpectedly quitting. You have taken some really good troubleshooting steps already. I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M.

ITunes successfully installs in my computer but the moment I open it, a message will appear showing that microsoft has stopped working and the program will close. What do I do?

iTunes successfully installs in my computer but the moment I open it, a message will appear showing that microsoft has stopped working and the program will close. What do I do?

Let's first try updating your QuickTime Player to the most recent version. Does that help with the iTunes launch errors?

The top row of my iPhone 3GS keyboard has stopped working.

The top row of my iPhone 3GS keyboard has stopped working. I've already done a soft reset, hard reset, and restored it to a new device. What else can I do?

When you are using other applications, or just on the home screen, does that area of the screen respond to touch?
Steps to resolve issue (I understand you have done what you have but it's always good to try again):
Clean the iPhone screen with the cleaning cloth that came in the box with the iPhone.
Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
If you have a protective plastic sheet or film on the touchscreen, try removing it because it may be preventing the touchscreen from working properly.
The current application may not be responding (frozen), press and hold the Home button below the screen for a least six seconds, until the application you were using quits.
If that doesn't work, turn the iPhone off and turn it on again. Press and hold the Sleep/Wake button on the top of the iPhone for few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't work, reset the iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation and replacement, if necessary, even if your iPhone is out of warranty. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the iPhone Service FAQ.
Tip: If you are going to take your iPhone into a Apple Retail Store for evaluation, follow these steps to help the Mac Genius understand where your touch screen is experiencing unresponsiveness.
Open the basic calculator application to test all but the top row of the screen. Press each button on the calculator and verify activity.
To test the area at the top of the screen, rotate the iPhone to change to the scientific calculator and press all the buttons in the left two rows. (An original iPhone must have iPhone 2.0 software installed to access the scientific calculator feature.)
To test the touchscreen function at the top of the screen of an original iPhone without the iPhone 2.0 software, press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. If the slider does slide, press and hold the Sleep/Wake button until the Apple logo appears to turn iPhone on again.

Can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

Ok, I am having literally identical issues with Marathon Max.
I try to connect, and it says, "Itunes could not connect to the itunes store, Make sure your network connection is active and try again." I have contacted my ISP, and they ran a full check, and sayed I should be able to connect to pretty much all websites. I did the whole "ipconfig" thing and that was no help. I also tried the "msconfig" thing, and it sayed it did not recognize it as any kind of command, internal or external command or operable program or batch file. Whats strange is I can connect from another computer just fine, but when offered to upgrade itunes I declined for fear of the same thing happpening. I am tempted to just upgrade it and thus demonstrate that itunes has a flaw in their upgrade. I will save this computers diagnostics, and the other one's too, before and after the upgrade. I look forward to sending more feedback regarding this matter

How can I remove the "enter" key from the keyboard? (New Macbook)

I have the last white macbook, I spilled beer in a couple of keys, I managed to removed them without problems, but I can't find the way to remove the Enter Key, and there is no help on internet Anyone?

What characters are you talking about exactly and why would you want to remove any?
There is really no way to modify Apple's keyboards or add your own in iOS, but there are some apps that may provide a work around.

Hdmi sound on my mac mini has stopped working after I upgraded the OS

I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

I have Photoshop Elements 11 installed on my PC, and now it flickers on startup of the Editor, then closes on its own with a message saying it has stopped working.

Photoshop Elements 11 has been working for over a year, and now suddenly it flickers on startup, then closes with a message saying it has stopped working.
Is there a repair option to fix it?

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Everytime i try to go to the apps part of itunes to sync my phone it says itunes has stopped working. how do i fix this?

I just got the new iPhone 5 c. i want to be able to sync all of my stuff an so far it all has except my rintones an text tones. when i try to do it using iTunes it says iTunes has stopped working closes an then just repeats each time i try. i have tried unistalling an reinstalling iTunes an it wont even work. im at wits end. that is alot of money lost if i cant get them back

When I contacted apple they told me to uninstall an reinstall iTunes on the computer. That worked for allowing me to look at things but didn't solve getting back my stuff that just seems to b gone. :(

THE click on feature to sign on log out of certain applications has stopped working for me

my arrow for clicking on LOGON LOG OFF and sign in and sign out isnt working on certain appliciations this just started with my last Foxfire Update Please HELP

That problem is caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

The "enter" key on the numeric keypad of my external mac keyboard has stopped working. Help!

Similar Messages

Maybe you are looking for