The entire side moves a bit (in the browser) when the content gets longer than a certain length...

The master (and all contents) move a few pixles (when watching it in the browser) when a side is longer than 809 pixles.
The sidesettings are set to 600 pixles minimum. Does not happen (it all stays in place) when the content fits in 809 pixles or less.
Why?? How do I solve it? Really frustrating...

Hi
I'm seeing similar issues from W2003 server, and 9iR2 on W2003.
I can pinpoint it to exact amount of bytes, but when the connections are reset from the web server, and the problem arises again it's a different length that is the problem.
As a result we switched to System.Data.OracleClient for the 9iR2 DB's and use the ODP.NET for the 10gR2 installations. These two combinations seems to be less affected by this problem.

Similar Messages

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips?

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips? Also when I use my blade it only leaves a dotted line in the clip. How can I make that a solid line? I do a lot of flickering in my videos and don't need that some what of a snapping effect while I edit. Please help me someone. I believe i upgraded from FCP 10.0.1 to 10.0.3 and before it never did this.

Mark an In point and an Out point (which creates a Range) and hit the forward delete key (Replace with Gap.) On a MacBook, you'll probably need to hold down the Fn key and type the Delete key (or, I think you might be able to use Shift-Delete as the same command). On an iMac/Mac Pro keyboard, it's the key just to the left of 'end' or the next key above the left arrow key.
You can use the Range tool (hold down the R key and click drag over your clip) or the Blade tool to cut at the in and out (then select the cut and replace with gap).
You can also go into Commands > Customize (command-option-K) and assign a different key to Replace with Gap.
If you need to ripple edit the ends (cut), create a small section that is Gap, and hold down the T key while you use the mouse to click drag both ends (double sided trim cursor) of the cut.
Don't worry about the dotted line blade... That just lets you know that the frames on either side of the cut are continuous, or sequential — nothing has been moved yet. Once frames from either side of the mark have been cut, it becomes a full fledged cut resembling a separate clip.

How do I make my website's menu sidebar fill up the entire side area?

This is my website http://www.sabertoothedchicken.com/
Notice how the menu sidebar only fills the tiny area surrounding the menu text? Yeah, I don't like that. I want it to fill up the entire side area (apart from where the headbar and footbar are), like they've got on a lot of other sites I've seen (Examples: http://en.wikipedia.org/wiki/Main_Page http://www.deviantart.com/ ). How do I do that?

On second thought, I think you should visit here
http://www.w3schools.com/
You need to get some basic html/css skills.
Gary

I am running Elements 11 on Windows 8. When I use the healing tool, the entire image moves with the cursor. How do I fix??? Thanks!

I am running Elements 11 on Windows 8. When I use the healing tool, the entire image moves with the cursor. How do I fix??? Thanks!

With the Healing Brush Tool selected, in the Tool Options, click on Clone Overlay and check Clipped.

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
Ujjal

Backup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379

HT4623 I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the sam

I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the same or I have to download the entire IOS again?

Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes.

How can I change the behavior of the Green Enter button when filling out a field in a form? Current it submits the entire form, I would like it to tab to the next field instead

When using Firefox for Andriod:
When filling out a field on a form, they keyboard has a Green Enter button that submits the entire form. However, there are multiple fields on the page, and I would like it to tab to the next field. At the very least not submit the form.
Also, is there a way to configure the keyboard that shows up for each html5 input type?

They keyboard that shows up has the large "Green Enter" go button, a backspace and some arrow keys, but no tab button.

The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?

The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?

See the icon bar on the bottom: click on the leftmost icon to restore the left panel.

HT1602 Hi, does my iPhone need to be on the left side of my body to work well with the Nike+ sensor in my shoes? I used it on my right side and the calibration was so off point.

Hi, does my iPhone need to be on the left side of my body to work well with the Nike+ sensor in my shoes? I used it on my right side and the calibration was so off point. I recently got a Bluetooth headphone and the antennae is on the right ear piece. For seamless connection am required to have my iPhone on my right arm if am using the headphone outdoors.

I was wondering this too. Did you ever get an answer? I just bought a non-nike pair of sneakers and have a pod pouch now on my laces. I have it tight, at the lower part of the laces so its flat. When its on the left side my time is very similar to what it was when I used the nike shoes. When it is on the right side, my time is about 35sec/mile higher. I wonder which is more accurate and if you are supposed to have them on the same side. If so, then that is as accurate as with my nike shoes. Hope we get an answer soon. Im about to return everything its so frustrating.

My iPad 2 is connected, works well and is found under "devices" on the left side of my iTunes window. But when I go into my iTunes account the iPad2 is not listed nor found to be "associated" with my account. Why not?

My iPad 2 is connected, works well and is found under "devices" on the left side of my iTunes window. However, when I go into my iTunes store account under "manage devices" the iPad2 is not listed nor found to be "associated" with my account. Why not?

Even if you put a credit or debit card on file with iTunes it will still use your balance FIRST.
I would suggest putting a card on file and testing to see if it will allow you to make a purchase, then removing the card from the account after successful download of an item.
EE

I am trying to crop faces from old family group photos and paste them on to records in Family Tree Maker. When I do this, the pasted cropped image reverts to the original of the entire family. Is there a way of unlinking the original version from the crop

I am trying to crop faces from old family group photos and paste them on to records in Family Tree Maker. When I do this, the pasted cropped image reverts to the original of the entire family. Is there a way of unlinking the original version from the cropped image?

Are you copying the cropped images directly from Aperture's Browser window and then pasting into your family tree?
It would be safer to export the cropped faces as new image files to a folder on your disk, and then drag them from there to the "Family Tree" window.
To export select the cropped image versions in Aperture's browser and use the command "File > Export > Version". Select a suitable export preset from the pop-up menu, for example "Jpeg fit into ..." and select a folder to export to.
Regards
Léonie

It's not showing the play or next song buttons on locks screen when the musics are played

it's not showing the play or next song buttons on locks screen when the musics are played

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

I got the iPhone 4S and I use google calendar and when the Sprint salesperson set up my phone only 2 months of my calendar went on my phone. How do I get my whole calendar to sync on my phone?

I got the iPhone 4s and i use google calendar and when the Sprint sales person set up my phone, only 2 months showed up on my iPhone. How do I sync all of google calendar to my iPhone!

Settings/Mail,Contacts,Calendar - there's a setting for how far back to sync calendars.

Open PDF in same browser when the preference is set to open in new window.

The corporate policy for all applications is to open the PDF document in new browser/reader but our application needs the reader to open in the same browser even the preference "Display PDF in Browser" is unchecked.... The setPreference from javascript (html) doesn't seemed to work... How do i make this work?
Also, I need the links the browser to open in new browser once the PDF is loaded... do I need to reset the preference once it is loaded for the links to open in new browser?
thanks,
- Ray

There is no way to override that from your application. And if the Links in the PDF have an explicit "open in new window" setting, that is respected over the preference.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 19 Oct 2011 22:02:53 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Open PDF in same browser when the preference is set to open in new window.
Open PDF in same browser when the preference is set to open in new window.
created by h_ray<http://forums.adobe.com/people/h_ray> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3981167#3981167

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
Acrobat 9 support of MS Project via PDFMaker stops with Office 2007.
For Office 2013 support you must use Acrobat XI (11.0.1) or newer.
A good to have reference:
https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Acrobat Pro and Standard DC are what are currently available for purchase.
Be well...

The entire side moves a bit (in the browser) when the content gets longer than a certain length...

Similar Messages

Maybe you are looking for