The error 034 when calling BAPI_XBP_JOB_START_IMMEDIATELY

Hi,dear all,
When I call the function 'BAPI_XBP_JOB_START_IMMEDIATELY' to start all jobs, the 'RETURN' type 'BAPIRET2', 'NUMBER' is 034, 'TYPE' is E. Do you have some idea about what's the potential problem on it? Thanks a lot.

Hi,
if the Function module is remotely enabled also, we can call that from same system.If u want to use destination give destination 'NONE',otherwise no need to give destination.
Regards,
Jyothi.

Similar Messages

Error 512 when calling PEOpenPrintJob

Post Author: gnilsen
CA Forum: Crystal Reports
Hello,
I'm using a product called Dexterity which is for the Microsoft Dynamics platform. We use crpe32.dll to run our crystal reports from our application. First of all, when Crystal 10 was installed we used crpe32.dll with a date of 06/13/2004 and my reports print just fine. When I upgrade to Crystal XI, initial install, I get a crpe32.dll with a date of 12/07/2004 and my reports don't print. I get the error 512 when calling PEOpenPrintJob. So I figured I would move up to SP4 for Crystal XI and which provided crpe32.dll 05/27/2007 1:12 AM. I tried to run the reports with that .dll and I run into the same error. From my research I see that error 512 is PE_ERR_ENGINENOTOPEN or Print Engine Not Opened.
Here is where my report is located and this is what I pass into PEOpenPrintJob: "C:\MBS\GP10\WennSoft\Crystal Reports\Service WIP Summary.rpt"
I have tried a few different approaches trying to get this to work and here is some of my troubleshooting ending up with no luck. I took my Crystal 10 report and saved it as a Crystal XI report and that didn't work. I tried to use the old crpe32.dll from Crystal 10 and the program is smart enough to grab the latest crpe32.dll from the C:\Program Files\Common Files\Business Objects\3.0\bin folder. The report does have sub reports in it, but my code starts with trying to get the main report Print Job first and it doesn't even get to the code for the sub reports. (I don't know if that helps but I trying to give as much info as possible.)
1) Is there anything I need to do different in Crystal XI?
2) Do I need to call something before PEOpenPrintJob?
Thanks in advance.

Hi Nayani
Please go to the technical WF log, select the mail step in error and check the container element ADDRESSSTRING - it should have valid values. If there is no value or at least one line, that is the cause of your error.....this means you will have to correct the method/process/code/ where you are fetching the email addresses.
regards,
Modak

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Why do I get Error -1073807343 when calling the open visa function ?

Hello,
I am running a Labview 6i under Linux (kernel 2.4) and I have Error -1073807343 when calling the open visa function. I have verified the name of the session (GPIB0::9::INSTR), and I can communicate with my instruments with ibic.
More informations : I use NIVISA 2.5 and nigpib-0.8.2. I have downloaded the lastest drivers of my instruments but it doesn't work better.
Thanks very much for your help.

We've had several NI-VISA releases since 2.5 - so I suggest you upgrade to NI-VISA 3.0. While there isn't anything specific to your type of problem in the Linux version of our readme.txt, I know we've made a number of other fixes.
While the most recent release is NI-VISA 3.1, I still recommend you upgrade only to 3.0.
This is because NI-VISA 3.1 requires the new NI-488.2 release for GPIB-ENET to be installed (even though you aren't using that product). This is due to some internal rearchitectures, and the PCI-GPIB product is not released. If you do want to go with NI-VISA 3.1, the new NI-488.2 release for GPIB-ENET on Linux will still work with the PCI-GPIB beta driver that you have installed.
Dan Mondrik
National Instruments

How to get more detailed error information when calling Java SP

Hi
Sorry for reposting this in here but I got no responses in the JVM forum...
I am calling a Java stored procedure from a PL/SQL stored procedure (Oracle DB 9.2.0.8.0) and I am getting the exception:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.NullPointerException
It does not help much though... Is it possible to get the full Java error stack from within PL/SQL so I can log a more informative message?
Thanks!
Luis

Thanks for the replies! However I am not sure if they help...
I will give some more info about my problem. I have an Oracle job that runs every morning and executes a PL/SQL procedure, which in turn calls that Java SP.
Sometimes the Java SP fails and the error is logged; however only the message "java.lang.NullPointerException" is reported by the SQLERRM function (apparently the last Java error message in the error stack). I am unable to reproduce the error when calling the Java SP manually as was suggested.
I need to log a more detailed error message from within PL/SQL to know exactly where the error occurred, when it occurs next time...
I will take a look to see if I can get some information in some trace file, though ideally I would like to do it programatically.
Thanks
Luis

Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
ERROR
Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
STEPS
The issue can be reproduced at will with the following steps:
1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
2) Created dnd.param file in SIebel server SDQCOnnector folder.
3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
6) Configured the Siebel components for EDQ integration.
7) Realtime EDQ jobs are running.
8) Create a new Account
Env details are
On : 8.2.2.14 [IP2014] version, Client Functionality
EDQ 11.1.1.7.4
IBM JDK 1.7 32 bit
Using Open UI
Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
Regards
Monoj Dey
9007554589

Hi Monoj,
A few questions:
- What OS is Siebel running on?
- What version of the Siebel connector are you using?
- Which libdnd.so file are you using?
- What's the contents of your dnd.parms file?
thanks,
Nick

Error '9' when calling service 'SO_OBJECT_SEND'

We are implementing travel module. The scenario is when the employee raises a travel request, after approving the mail should be sent back to the employee. This feature is provided by the standard.
However in the SEND_MAIL step the WORKFLOW Container variable 'Employee.Trip.User.Id' is not set owing to which the mail step gives out error.
Can anyone please guide us on the probable cause of the error ?? Where does the object TRIP gets the value 'TRIP.USER.ID' ??
Is it any setting issue ??
Please guide..

Hi
Run report HRALXSYNC and you will solve this.
We have faced this issue many times and the solution we have applied is
1. This issue occurs on a step that is dialog where some agent needs to either approver or reject.
2. You should check the rule (Agent determination rule in that step).
Run that rule with the workflow data (use scenario with which you are getting error).
Run the rule individually and check if you are getting right result.
this error most of the time id due to the fact that the rule is not be able to determine next processor of the workitem.
Error 9 when calling service SO_OBJECT_SEND SWF_RUN535
to assure you can hardcode the user for test in the rule and run the workflow as that is the most effective analysis that will help you determine the cause.
I have never seen this error on a background step unless there is a mail step involved.
You need to run the report HRALXSYNC to synchronize HR objects which will surely solve this issue.
regards
barin

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's

Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
Anton

Hi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH

I am unable to open another Firefox4 window when I have the Error Console open and I can't open the Error Console when I have two Firefox4 windows open. Is anyone else having this problem?

I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Getting Error Message "Error '9' when calling service 'SO_OBJECT_SEND'

Hi All,
We are working on SRM5.0(with servier 5.5 paching 14) and ECC (R/3) with SAP appl 600(16 th patch).but the workflow is giving the error "Error '9' when calling service 'SO_OBJECT_SEND' and PO is still in the awating approval status.
Regards
Channappa Sajjanar

Hi,
See this related thread:
Re: Workflow Error -- Error' 9' when calling service ' SO_OBJECT_SEND'

SRM Workflow error- Error' 9' when calling service ' SO_OBJECT_SEND'

Hi Team,
We are facing problem with SAP SRM Workflow error- Error' 9' when calling service ' SO_OBJECT_SEND' .
Due to this WI is not going to Approver/Requester INBOX and unable to process that WI.
Please advice .
Greatly Appreciated for Help.
Regards
CK

Hi,
Not sure what '9' is, the exceptions called by the SO_OBJECT_SEND function are as follows:
EXCEPTIONS
               ACTIVE_USER_NOT_EXIST      = 35
               COMMUNICATION_FAILURE      = 71
               COMPONENT_NOT_AVAILABLE    = 01
               FOLDER_NOT_EXIST           = 06
               FOLDER_NO_AUTHORIZATION    = 05
               FORWARDER_NOT_EXIST        = 08
               NOTE_NOT_EXIST             = 45
               OBJECT_NOT_EXIST           = 13
               OBJECT_NOT_SENT            = 15
               OBJECT_NO_AUTHORIZATION    = 13
               OBJECT_TYPE_NOT_EXIST      = 17
               OPERATION_NO_AUTHORIZATION = 21
               OWNER_NOT_EXIST            = 22
               PARAMETER_ERROR            = 23
               SUBSTITUTE_NOT_ACTIVE      = 31
               SUBSTITUTE_NOT_DEFINED     = 32
               SYSTEM_FAILURE             = 72
               TOO_MUCH_RECEIVERS         = 73
               USER_NOT_EXIST             = 46
               OTHERS                     = 1000.
Regards,
Jason

Workflow Error -- Error' 9' when calling service ' SO_OBJECT_SEND'

Hi ,
Could you pls tell me what will be the reason for this Error' 9' when calling service ' SO_OBJECT_SEND'
Thanks & Regards,
Gopal

Hello
reason could be lot of things:
check the note 938147 for example...
Another helpful note is the 190669
regards,
daniel

Error '20' When calling Service 'SO_OBJECT_SEND'.

Hi Experts,
In my work flow I am using step to send mail.
While executing the workflow this step is throwing the above error 'Error '20' When calling Service 'SO_OBJECT_SEND'.
Please help me in this case.
Regards,
Nayani

Hi Nayani
Please go to the technical WF log, select the mail step in error and check the container element ADDRESSSTRING - it should have valid values. If there is no value or at least one line, that is the cause of your error.....this means you will have to correct the method/process/code/ where you are fetching the email addresses.
regards,
Modak

TS1368 getting the error 0x80092013 when trying to connect to the store to buy music

getting the error 0x80092013 when trying to connect to the store to buy music

I can't dial: (Get 'call denied' message)
[email protected]
[email protected]
[email protected]
Is there a way to know this is being addressed? How would one start a support case on this subscription service?
Although I subscribe for service for my SX20's and Bridge, my jabber video account is a free account.
Update: At 1pm CT I am able to dial and connect.

How to Customize the Error Message when a user enters a wrong password

Hi Gurus
Pls Help out me that
How to Customize the Error Message when a user enters a wrong password ?
I need the Help to Customize the messege ?
How we can do
Pls Tell me indetail

Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
The file you need is actually a portal .par file and can be found in the deployment/pcd directory. The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time).
You need to copy this file to a local machine and unzip the contents. The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar. It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
In this file you will find lines like:
NUMERIC_REQUIRED=Invalid new password (must contain digits)
You need to identify which texts you wish to modify and edit the text to the right of the equals sign. Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension. Then logon to the portal and upload the new par and you should see your new logon messages.
Haydn

The error 034 when calling BAPI_XBP_JOB_START_IMMEDIATELY

Similar Messages

Maybe you are looking for