The ESA Preview System is here!
We have launched a new ESA Preview System page:
https://www.sdn.sap.com/sdn/esapreview.sdn?node=linkDnode12-2
We welcome your comments, feedback, questions and experiences with the ESA Preview System and participation in the ESA Preview program.
cheers,
Marilyn Pratt
Thanks for valuable information Mr.Marilyn Pratt.
Regards
Srinivasa Polapala
Similar Messages
-
What happened to the ESA Preview System?
Last week the ESA Preview System forum stated that access had been suspended. Today I cannot even access the forum to get an understanding of what is going on. Anyone have an idea?
Steve,
To add to Kaj's comments, please verify that the following is done:
"To take full advantage of the ESA Preview System you need to make sure you can access all of the URL's from your company network. This especially means you need to have access to the following network ports: 80 and 50001"
Ciao.
Dan -
Publish Self developed service in preview system
Is it already possible or planned to be possible to publish self developed service in the Enterprise Services repository of the preview system? Is yes, where is this described?
Thanks and best regards. SandroDear Sandro,
That is an excellent question - At the moment this is not possible in the ESA Preview System, but it will certainly be possible as part of SAP's upcoming product releases, where partners and customers can contribute content to the Enterprise Services Repository.
Best regards, Kaj -
I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?
I had the developer preview installed. Never had to update to the release version of the OS. Now, the preview has expired, and I cannot use my phone because my iTunes reads my OS as being current, but my iPhone cannot active. Any ideas on how to fix this issue?If I Google for Michael Superczynski, first match tells "Michael Superczynski's Profile : Apple Support Communities". It in fact does a lot of work there even if not paid.
And yes we do not have disagreement about "official apple developers". Problem is that Apple screwed our devices because we are "official apple developers" and did effort to stop us getting proper help. I unbricked my ipad and iphone thanks to unofficial help. Thank you who wrote this unofficial help and "no thanks" for apple for ruining my access to my devices. My mistake was assuming that "update" button on my devices works. It did not because it always told "Your device has latest IOS6 installed" until it bricked yesterday.
If Apple does not want to listen us, continue do delete post, blame us installing your software and yes we stop buying your devices and developing for them.
Tonu -
No PSA for Infosource X and source system Y. Here Y is the flat file source
Hi,
We are facing an issue while transporting from dev s/m to quality. There is no PSA for Infosource X and source system Y. Here Y is the flat file source system this issue we are getting while transporting transfer rules.We are checked in OSS notes 518426. Its not helpful.
Thanks
ManjulaHi
Try RS_TRANSTRU_ACTIVATE_ALL (SE38).
You may also check SAP Note 861890 - ODS tables disappear during the upgrade -
and activate all ODS Objects before the upgrade and run the program RSDG_ODSO_ACTIVATE.
also that with Stack 14 an extended version of this program is available together with the
Program RSUPGRCHECK. If errors occurs, consult also SAP Note 518426 and run transaction
RSSGPCLA for the regeneration of the RSDRO_* Objects.
Recheck whether you have Exported with correct parameters or not -- Try to Re Export the Same with all necessary objects .
Try Note 524554 and 325525 also
Hope it helps and clear -
I just downloaded the latest operating system to my IPad and now cannot access Angry Birds Friends from Facebook. Any solutions?
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
The lexis nexis dictionary app apparently isn't supported by the new ios system. I tried to report a problem but it lead me here. Please advise.
Lexisnexis appears to have chosen not to provide the dictionary app any longer.
I suggest you contact Lexisnexis support at http://www.lexisnexis.com -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Made preference changes, but still getting the Ram preview needs 2 or more frames to play back.
I'm new to After Effects CS6 and am working on a very simple Kinetic Typography project. I don't have a lot of memory, but this is a really simple project, so I'm wondering if maybe I'm just not using the work area correctly. Every once in while I can get the project to RAM preview, but only for a few seconds. Most of the time I get the "Ram preview needs 2 or more frames to play back" error message. I have pasted my sytem info and setting info bleow. Thanks for any insight!
I have checked the Render Multiple Fames Simultaneously box and have set the seetings at:
Here is the info when you click on details:
Installed RAM: 4.00 GB
Current RAM Usage: 0.00 GB
Allowed RAM Usage: 2.50 GB
Process ID
Application Name
Min Needed Memory
Max Usable Memory
Max Allowed Memory
Current Memory
Current Priority
3081
After Effects
0.00
0.00
2.50
0.00
3 - Low
System info:
System Version: Mac OS X 10.6.8 (10K549)
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GBWhat exact version of After Effects?
Show a screenshot of your TImeline panel and Preview panel when the problem occurs.
Make sure that we can see the details in your screenshot. Your current screenshot is unreadable because it's so small. -
Are you experiencing the EFFECTS PREVIEW "LOCKUP" PROBLEM? Please Read!
Hello Everyone,
After continued investigation by several members of our engineering team for the past few months we have found that the Effects Preview lock-up is caused by an altered version of the Audition executable file. If you have replaced the original Audition.exe which was installed by the Audition installer (including the trial version) you will experience this side-effect. We have verified that this bug does not exist with the released version of Audition and will only occur in cases where the user has replaced the Audition.exe with this altered version.
To resolve this issue we suggest that you delete this altered Audition.exe file and replace it with the original. If this is unsuccessful we advise you to uninstall Audition and re-install with an Adobe issued serial number.
If you continue to have problems please send an email to [email protected] with an explanation of the problem, your serial number, and a copy of your Audition system information report which can be found by going to Help > About and clicking the System Info. button.
--RonI posted this in another topic, so I thought would paste it here as well.
Okay I feel I must share this with you folks even though the whole thing was an error on my part, so anyway we have by now all heard of the AA3 vst freeze problem, well last night I wiped my HD clean and did a whole new install, because I am using an AA3 upgrade from AA 1.5 I have to install both apps, so I did this last night and reinstalled both apps, and again I got the VST freeze, but the bug wasn't in AA3 something happened with 1.5, so I reinstalled 1.5 and then ran the repair wizard on 3 and I cannot get the VST freeze no matter how hard I try, when ever I went through the motions of reinstalling 3 on various comps, I never bothered to uninstall and reinstall 1.5, I realize this is more of a major user error (namely me)
but it works now! I think that perhaps for those of us using upgrades from 1.5 something down the road broke and it effected AA3 maybe a windows update or something, but man it feels good to have it up and running, Long live AA, anyway I would be curious as to how many people this is happening to are using upgrades as well. Anyway if you want more info on what I did, just ask.
Hope this helps
Peace
and to those I may have given attitude to, well the weight is lifted and I can now apologize
UPDATE, not only did this clear up my VST freeze, but also a list of other minor issues, such as disappearing presets, Sound Lag when sweeping an EQ, Compressor pops, extra long load times, clicks when recording, multi track editing issues, my total re-install solved a long list of things,
hope this helps -
I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess. -
How can I access the thumbnail/preview image of a PSD file?
Hey guys I'm trying to salvage some work from a corrupted PSD file via the thumbnail. What happened was I saved my work and closed photoshop and hit the reset button on my PC afterwards by mistake (i dont see why this caused a problem because the program was fully closed at the time). When I open the file now it says it uses an unsupported blending mode, if i press ok I get an error saying incompatible PS version, if I press flatten it says unexpected end of file was encountered. Ive tried PSD repair tools and searched the net for solutions and there doesnt seem to be any - Ive pretty much given up on trying to repair the original file.
The thing is, the thumbnail of the file seems to be intact because I can still see it as the file icon. I wanted to know if there was any way i can access this thumbnail image so i can enlarge it. Any help would be very appreciated!!I have an idea to try... Earlier I mentioned the Windows Picture Viewer... Normally that won't read PSD files, but I'm used to using that to look into PSD files because at one point I bought the FastPictureViewer Codec Pack.
Something to try, and it won't cost anything:
1. Try downloading and installing the FastPictureViewer Codec Pack from here: http://www.fastpictureviewer.com/codecs/
2. Once it's installed you get a free trial period, so you can try opening your PSD file by right-clicking on it and choosing Preview.
If that fails, here's another thing to try:
Open the Bridge component of Photoshop and navigate to the folder in which you have the file. It may be able to make a larger thumbnail than the one you're seeing.
Other than that, are you saying you're seeing the thumbnail in Windows Explorer? If that's the case, what happens if you right-click in the white space near the file and choose View - Extra Large Icons?
-Noel -
Unable to 'set the default source system' to Install Business Content
Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P -
How to get access to the local file system when running with Web Start
I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA). -
Adding users to roles in the new preview portal (new RBAC feature) does not work
When I click the Invite Users/Add button for any of the 3 roles in the new preview portal, the page doesn't load and instead, it instantly redirects to an HTTP 520 error page. Can anyone please look into this and fix it? It's been this way since last week,
which is when I checked it out but it is quite possible it has been this way for longer.Hi,
It seems there are some issues in azure preview portal, please note this portal is in preview version, if you find some issues, please try to contact with azure experts, here is azure support channel:
http://www.windowsazure.com/en-us/support/contact/, it is a good choice for you.
Sorry for any inconvenience.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
The screen would fade into these weird pastel stripes, and if I pinched the sides a bit it would return to normal, but a few weeks ago it stopped returning to normal. I would like to get my iTunes and iPhoto contents and my documents of various sorts
-
Not Able to Use Gtalk in Curve 9320 Via my Sim data but internet is working as i checked via browser
Hello, Not Able to Use Gtalk in Curve 9320 Via my Sim data but internet is working as i checked via browser & i also use youtube but not able to login any messaging option & not able to creat Email account Please Help! Thanku Shivam
-
Hello, Can anyone help me? select year(po.rdata) as 'Ano', sum(etotal) as 'Valorp' , (select year(fo.data),Sum(etotal) FROM fo (nolock) where not exists ( select 1 from pl (nolock) where pl.adoc = fo.adoc and pl.cm = fo.doccode ) group by year(f
-
When trying to open some examples to use the TC01, labview tries to find these files but can't find them: DAQmx Read (Analog DBL 1Chan Samp).vi DAQmx Create Channel (AI-Temperature-Thermocouple).vi DAQmx Create Virtual Channel.vi DAQmx Clear Task DAQ
-
Mouse cursor moving going back to orignal position. PLEASE HELP!!!
I am desperate, I have tried everything I know of, but no luck. My mouse cursor is stuck above the lower left corner of my screen. When I move the mouse, the cursor moves and as soon as I stop, the cursor goes back to the same position. I have restar