The EURO currency table (EWUCURRS) could not be set up.

Hi,
When I create a PO while using AED as currency, I get message
Pricing/euro: Attention: Euro Customizing not maintained
Message no. VH777
Diagnosis
The EURO currency table (EWUCURRS) could not be set up.
Procedure
Check EURO Customizing (see OSS note 91481 and 135661).
I went through the notes but could not really understand what's exactly required to be done.As it mentions several notes in one note.Also these notes talks about older versions.
I am using ECC 6.0
I am getting this error only sometimes.May be when am not using European currencies.
What is this message basically and what needs to be done exactly.
Note talks about many things in one thing like maintaining EURO/EURX so on and so forth.
According to me the note confuses a lot than helping.
Can anyone suggest what is to be done and what is the severity of this message ?
Thanks in advence
regards,
manOO

Hi
Check T code- EWCF (Confirmation of EURO currency customization)
Thanks
Ansuman

Similar Messages

The attibutes SID table(s) could not be filled

Hi,
I have a problem during the transport of an infoobject with master data. There are some fields time dependent and some other not. The transport goes in error with the following message:
"The attibutes SID table(s) could not be filled"
I tried to reactivate the infoobject but nothing changes.
Any ideas?
Thanks,
Gianluca

I have again this error. I have an inconsistent master data in quality environment (the 2 SID tables P and Q are empty). When I transport the infoobject in quality without modifications, transport is ok. When I add a NAVIGABLE attribute, the transport goes in error and the message:
"The attibutes SID table(s) could not be filled"
is shown. Does anyone know if there exist a method for regenerate the sid tables? (I mean the values contained in the sid tables).
Or I am obligate to delete the master data values?
Thanks!

The attributes SID table(s) could not be filled

I am trying to change an attribute to a navigational attribute for 0MAT_PLANT and I am receiving this error upon activation. I have tried the following:
1) Deleting Master Data and reactivating
2) Program RSDMD_CHECKPRG_ALL
3) Activating in the background
4) Fill Attribute SID Table
When I try to fill the attribute SID table, I get a SQL error.
SQL Error: "/BI03503" in R3DBWDATA type *FILE not found. MSGI D= Job=753132/DBW00/WP14
Can someone tell me how to correct this error?

Likely there was data in these tables, and DB system can't adjust the table with changes you have done.
If you can, try dropping all master data for the IOBJ and then reactivate.
If this doesn't work or is not feasible, identify which table is having this issue (/BIxxxx), display it in SE11, go to utilities-->Database object --> Database utility; on the next screen try to do a Activate and Adjust Database (first with save data, and if unsuccessful then with Delete data option).

SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)

Hi Gurus,
I am trying to load a HANA column table using the import function and get the following error even though the mappings from the file to the table are 1:1.
I get the following errors:
Error 1: SAP DBTech JDBC: Result set is positioned before first row.
Error 2: SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)
With the following stack trace:
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:165)
at com.sap.db.jdbc.packet.ReplyPacket.buildExceptionChain(ReplyPacket.java:100)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1141)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:888)
at com.sap.db.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:929)
at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:256)
at com.sap.db.jdbc.StatementSapDB.executeQuery(StatementSapDB.java:401)
at com.sap.db.jdbc.trace.Statement.executeQuery(Statement.java:131)
at com.sap.ndb.studio.bi.dataprovisioning.util.DBUtil.getPoolTables(DBUtil.java:200)
at com.sap.ndb.studio.bi.dataprovisioning.util.DBUtil.getTablesToHide(DBUtil.java:188)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.SelectTableDialog.createDialogArea(SelectTableDialog.java:108)
at org.eclipse.jface.dialogs.Dialog.createContents(Dialog.java:775)
at org.eclipse.jface.window.Window.create(Window.java:432)
at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1104)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.SelectTableDialog.create(SelectTableDialog.java:186)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.ImportFileSelectionWizardPage$14.widgetSelected(ImportFileSelectionWizardPage.java:779)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:826)
at org.eclipse.jface.window.Window.open(Window.java:802)
at org.eclipse.ui.internal.handlers.WizardHandler$Import.executeHandler(WizardHandler.java:152)
at org.eclipse.ui.internal.handlers.WizardHandler.execute(WizardHandler.java:279)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290)
at org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90)
at sun.reflect.GeneratedMethodAccessor33.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56)
at org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243)
at org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224)
at org.eclipse.e4.core.contexts.ContextInjectionFactory.invoke(ContextInjectionFactory.java:132)
at org.eclipse.e4.core.commands.internal.HandlerServiceHandler.execute(HandlerServiceHandler.java:167)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:499)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508)
at org.eclipse.e4.core.commands.internal.HandlerServiceImpl.executeHandler(HandlerServiceImpl.java:213)
at org.eclipse.ui.internal.handlers.LegacyHandlerService.executeCommand(LegacyHandlerService.java:420)
at org.eclipse.ui.internal.actions.CommandAction.runWithEvent(CommandAction.java:157)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$9.run(PartRenderingEngine.java:1113)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:997)
at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:138)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:610)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:567)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:150)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:124)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:354)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:181)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:636)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:591)
at org.eclipse.equinox.launcher.Main.run(Main.java:1450)
at org.eclipse.equinox.launcher.Main.main(Main.java:1426)
I'm sure many of you have come across this before. Any help will be much appreciated.
Thanks in advance

Hello Akhtar,
Have you tryed to delete the heador row from your file?
I received the same error when loading a csv file, but when I delete the heador row it worked.
Best Regards,
Juliana Genova

Crystal Report Pick List - "Table ADM1 could not be found" Error

Hi,
When preview is select in sales order, we select pick list gets error.
Crystal Report Window Forms Viewer:
"Table ADM1 could not be found"
Error in File Temp { .........} .rpt
The table could not be found"
If I login remotely , then log into SAP as this user I do not get an error.
I have given user full authorisation.
I have run Verify Database.
I am assuming it is some database or network user access rights.
Could anyone help on this?
Kind Regards,
Eric

Report was developed and tested against a 'test' database and then imported into a 'production' database.
Problem appears to be that when B1 connects it does not reset the login credentials for the unlinked tables such as ADM1 and OADM.
Performing the following steps appears to solve the problem. Not sure how many of them are really necessary.
1. Develop and test against the test system as before.
2. Save as a .rpt file outside B1.
3. 'Set Datasource Location' to the appropriate B1 datasource for the production database and individually link every table as well as the data source.
4. Save the .rpt file again.
5. Import into the production database.
This does not specifically address the issue where it worked when logged in to the server but not remotely. Perhaps when logged in remotely the test database was not visible but when logged in locally it was.

Table SI_WD_FIRST_MAIN_SCREEN could not be activated

Hi!
I am facing with the problem of hanging SPAM patch (SAPKB13 - 16).
The patch will be stopped in the phase IMPORT_PROPER (step: DDIC activation) after few seconds.
The error is:
SPAM
IMPORT_PROPER
Reason: TP_STEP_FAILURE
Return-code: 0008
Error message: OCS package SAPKB70013, step "A", return code 0008
I looked into SPAM - Goto - Import Logs - Queue and found the following:
ABAP Dictinary Activaiton endes with return code 8.
Table SI_WD_FIRST_MAIN_SCREEN could not be activated
The problem in DDIC ACTIVATION is due to fact that I created a
queue including SAPKB70013 and SAPKB70014 and spam reached MAIN
IMPORT phase. SI_WD_FIRST_MAIN_SCREEN is deleted in sp14
Then, the queue was reset (I suppose) and only SAPKB70013 was imported
manually in the system.
Question:
Is it possible to create the table SI_WD_FIRST_MAIN_SCREEN by my own in tcode SE11?
Thank you very much!
Thom

Thom-
What is your SAP rel and your kerenl level
most of the times for this error it might be an issue with the lib_dbsl patch to my knowledge
and creation of Table SI_WD_FIRST_MAIN_SCREEN will not be possible as you said if it deleted b'coz it is a predefined table.
Edited by: george rayi on Dec 10, 2008 7:04 PM

SPAM crash: Table SI_WD_FIRST_MAIN_SCREEN could not be activated

Hi!
I am facing with the problem of hanging SPAM patch (SAPKB13 - 16).
The patch will be stopped in the phase IMPORT_PROPER (step: DDIC activation) after few seconds.
The error is:
SPAM
IMPORT_PROPER
Reason: TP_STEP_FAILURE
Return-code: 0008
Error message: OCS package SAPKB70013, step "A", return code 0008
I looked into SPAM - Goto - Import Logs - Queue and found the following:
ABAP Dictinary Activaiton endes with return code 8.
Table SI_WD_FIRST_MAIN_SCREEN could not be activated
Could you please tell me how to proceed?
(e.g. activate the table by my own)
I would like to implement SAP note 1113868, but it is not possible due to the error that OCS/SPAM locked.
Are there any possibilities to solve this problem?
(e.g. to change manually necessary objects)
Thank you very much!
regards
Holger

Hi Holger / Thom,
You seem to be having a tramendous amount of problems since several weeks already with your upgrade...
Have you considered contacting SAP for some help with all these problems?
Of course, if these problems are "self-inflicted" then SAP might want to bill you for it, but I have not seen any mention of custom modifications or the likes in your many posts on the topic here at SDN, so possibly your SAP account manager and SAP Support should step in to solve the overall problem.
If I am missing the point here, then sorry for that - but the recurring flavour of the questions seems strange.
Can you clarify?
Cheers,
Julius
Edited by: Julius Bussche on Dec 7, 2008 9:29 PM

1EEDO519X"Table" "USMDZ1FCRS" could not be activated

During the EHP4 Installation getting the following error:
Error : in EHP4 Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-701DDINSAPBASIS.ECS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519X"Table" "USMDZ1FCRS" could not be activated
1EEDO536 "Technical Settings" "USMDZ1FCRS" could not be activated
1EEDO536 "Technical Settings" "USMDZ1FRS" could not be activated
1EEDO536 "Technical Settings" "USMDZ6001C" could not be activated
1EEDO536 "Technical Settings" "USMDZ60020C" could not be activated
1EEDO536 "Technical Settings" "USMDZ6201C" could not be activated
1EEDO536 "Technical Settings" "USMDZ6300C" could not be activated
1EEDO536 "Technical Settings" "USMDZ6E201C" could not be activated
1EEDO519 "Srch Help" "H_5ITCN" could not be activated
1EEDO519 "Srch Help" "H_5ITTT" could not be activated
1 ETP111 exit code : "8"
Applied note as per SAP: 1321756 and 1263115 and getting the folowing error --->
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-701DDINSAPBASIS.ECS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519X"Table" "USMDZ1FCRS" could not be activated
1EEDO536 "Technical Settings" "USMDZ1FCRS" could not be activated
1EEDO536 "Technical Settings" "USMDZ1FRS" could not be activated
1EEDO536 "Technical Settings" "USMDZ6001C" could not be activated
1EEDO536 "Technical Settings" "USMDZ60020C" could not be activated
1EEDO536 "Technical Settings" "USMDZ6201C" could not be activated
1EEDO536 "Technical Settings" "USMDZ6300C" could not be activated
1EEDO536 "Technical Settings" "USMDZ6E201C" could not be activated
1 ETP111 exit code : "8"
When checked in the shadow system, the table doesn't exists and when checked in se14 the dictionary object details exists as transparent table.
-Nagendran

Hi ,
Thanks for the inputs given for this thread .
while searching for simillar kind of posting , i found your conatct .
we are facing simillar kind of issue in our Upgrade project from 4.6C to ECC6.0
1EEDO536 "Technical Settings" "USRBF" could not be activated .
When i check Error log it is showing : Table USRBF for logging is too long (key<250, data division<16.000 necessary)
Message no. DT201
Diagnosis
The log flag is set in the technical settings for this table. The logs are standardly written to the database table DBTABPRT. The key area or the data area of the table to be logged, however, is longer than the fields of table DBTABPRT reserved for it. The table therefore cannot be logged.
Procedure
Remove the log flag from the technical settings and then activate the table again.
As part if upgrade we need to carry forward this Log check .
Please suggest me what can be done to fix this issue .
thanks
Sreenivas

Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL, Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
Fix problems with programs that can't be installed or uninstalled

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I keep getting the message, "the file is damaged and could not be repaired"

I have a newer Gateway PC equipped with Windows Vista Ultimate, and recently downloaded the free Adobe Reader 8.1.1 version to it.
I'm not very computer literate, so I'm not sure which terminology to use all the time...sorry.
When I attempt to open (view, read, download?) a pdf file, it starts the download process, showing the progress at the bottom of the page....for example, it might say, "downloading (16.2kb out of 543.5kb)"
Usually, about a minute or so into the download, the word "downloading" changes to "downloaded", the action stops, and shortly after (on the window with the gray Adobe Reader background), a smaller message window pops up, declaring, "the file is damaged and could not be repaired".
A friend suggested that there was probably a problem with the original downloading of Reader and recommended that I completely remove it from my system, then re-install it. Reluctantly, with a very slow dial-up connection network, I did as he suggested, then painfully sat through about a two-hour download AGAIN of Reader 8.1.1
After the download was completed again, I successfully opened a few of the pdf files which I was previously having the problems with. Problem solved??? NOT QUITE!!! After about three or four successful file downloads (openings/readings of the files), it again started to do the same thing, where it would not complete the downloading/opening process and again leaving the message, "the file is damaged and could not be repaired."
I am very confident that the files are not the problem, as many of my friends have viewed/opened those same pdf files repeatedly with no issues, BUT WHAT IS CAUSING THIS??? As I said before, I'm not very computer savvy as it is, and adding the newer Windows Vista Ultimate OS probably hasn't helped any.
1. Is the problem with Windows Vista?
2. Is the problem with Adobe Reader 8.1.1 (or the downloading of it)?
3. Is the problem related to the security settings of my computer?
4. Is the problem likely virus related (I use the purchased McAfee protection)?
I just don't know where or how to start looking for the solution, other than thru this forum, and I simply can't afford the time to remove and re-install Adobe Reader 8.1.1 each time I need the use of my computer.
Any assistance would be greatly appreciated, and you can e-mail me with suggestions to [email protected], or else call me on my cell
THANK YOU,
Don Maycumber
Republic, WA
509-570-8114 Verizon mobile

I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris

The EURO currency table (EWUCURRS) could not be set up.

Similar Messages

Maybe you are looking for