The exception 'CX_RSR_X_MESSAGE' was raised while loading the data

Hello SDNERS,
I am lworking in PA module, I have loaded the master data successfully, while loading th transaction data in 0PA_C01, it is taking too much time, when i debgug I am getting below Exception :-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
Kindly suggest.
Thanks
Shalini

Hi Shalini
I have the same problem.
Note 1157796 apply for SAP BI release 700 and 710 only . what do you use SAP BI Release?
I install BI Release 701, so i solve the problem not yet.
Please help me the solution for this error.
Thanks

Similar Messages

The exception 'CX_RSR_X_MESSAGE' was raised

Hi Forum,
i am using standard extractors 0co_om_wbs_6 loading data into ods i am not using any routines .when i trigered the load it is giving short dump with this error
The exception 'CX_RSR_X_MESSAGE' was raised but was not caught at any stage in the call hierarchy.
So plz comment on this issue.....

Hi Prathap,
Which version you are working on?
Go through the link http://documents.bmc.com/supportu/documents/07/07/50707/Output/TR4350_patch2.htm.
SAP has provided some patches for the same.
Hope it helps,
Sunil.

Exception 'CX_RSR_X_MESSAGE' was raised when doing the Change Run

Hi ,
Change Run is not happening and it is throwing runtime error "The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy."
When ever I am trying to "Monitor and Start Terminated Change Runs" the same error is happening.
Below is the error I see in the Job Log
Job started
Step 001 started (program RSDDS_AGGREGATES_MAINTAIN, variant &0000000000054, user ID)
SQL: 06.03.2009 09:55:59
TRUNCATE TABLE "/BI0/0600001776"
SQL-END: 06.03.2009 09:55:59 00:00:00
SQL: 06.03.2009 09:56:01
TRUNCATE TABLE "/BI0/0600001470"
SQL-END: 06.03.2009 09:56:01 00:00:00
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled
Any help on this would be great
Thanks
Subbu

Hi,
I guess there was nothing to change with tht, the log was simply showing tht ur change run was performing on tht table....
Chk on which object ur running this? whether any load got failed for this...?
Now restart the same run from the EXECUTE button in the window of monitor and start terminated change runs..... i guess it may finish...
rgds,

Error message while opening a project: "an error was encountered while loading the image"

We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?

Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

Everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? With the options cancel, continue restore and delete back-up??

I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?

I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup

ERROR : Exception "CX_RS_INPUT_INVALID" was raised while activating InfoSet.

Hey Guys,
I am getting an error while activating an InfoSet as:
"An exception has occurred which is explained in more detail below. The
exception, which is assigned to class 'CX_RS_INPUT_INVALID' was not caught and
therefore caused a runtime error. The reason for the exception is:
Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
The Infoset consists of two InfoCubes.
An InfoCube containing quite a few characteristics as attributes on a field and one attribute having a compounding attribute as 0CALYEAR.
Attached is the screenshot of the error message.

Hi Bhaskar, It's a not clear error, but in this thread you could find the answer at the end. http://scn.sap.com/thread/2076907 Regards.

How to expand all the nodes in a tree while loading the tree initially

Hi All
Now i am able to display the tree strucute in webdynpro.
but it is displaying the tree initially in collapsed mode until/unless we click on the node root it will be expanded.
but my requirement is i wanted to display the tree in expanded mode by default at runtime initially.
can you please provide any setting to be done or any sample code on the same then it would be great help to me.??
Thanks
Trisha

Hi,
isLeaf is an attribute you need to create under "CatalogEntries" node. And "isRoot" is not requried.
Download the sample project "TutWD_TreeByNestingTableColumn". See the below link to dnld this project.
https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/503f22f6-b978-2a10-bf97-ddc21267e752 [original link is broken]
Do the changes in sample project as below:
Invoke this method in the init method as below (as it is in the same project).
addCatalogEntries(wdContext.nodeCatalogEntries(), "ROOT");
Change the code in addCatalogEntries() method as below.
Here we are calling the addCatalogEntries() method recursively for all the parent elements and we are changing the setExpanded property to true.
public void addCatalogEntries( com.sap.tut.wd.treetable.wdp.IPrivateTreeTableView.ICatalogEntriesNode node, java.lang.String parentId )
//@@begin addCatalogEntries()
IPrivateTreeTableView.ICatalogEntriesElement newCatalogEntriesElement;
for (int i = 0; i < Catalog.getLength(); i++) {
if (parentId.equals(Catalog.getParentId(i))) {
// create new context node element
newCatalogEntriesElement = node.createCatalogEntriesElement();
node.addElement(newCatalogEntriesElement);
// provide node elements with data
newCatalogEntriesElement.setID(Catalog.getCATALOGID(i));
newCatalogEntriesElement.setTITLE(Catalog.getTITLE(i));
newCatalogEntriesElement.setDESCRIPTION(Catalog.getDESCRIPTION(i));
newCatalogEntriesElement.setAMOUNT(Catalog.getAMOUNT(i));
if ("ARTICLE".equals(Catalog.getCATALOGTYPE(i))) {
// checkbox is visible by default
newCatalogEntriesElement.setPUBLISHED(Catalog.getPUBLISHED(i));
// third level is last level
newCatalogEntriesElement.setIsLeaf(true);
} else {
// a CATEGORY does not use the checkbox column
newCatalogEntriesElement.setUsageOfPublishedAttribute(WDVisibility.BLANK);
newCatalogEntriesElement.setIsLeaf(false);
newCatalogEntriesElement.setChildrenLoaded(true);
newCatalogEntriesElement.setExpanded(true);
addCatalogEntries(newCatalogEntriesElement.nodeChildCatalogEntries(),newCatalogEntriesElement.getID());

The exception 'CX_HRPA_INVALID_BUFFER_ACCESS' was raised

hi evryone,
I am working on Previous employer's Details. When i am going to create a new entry , its throwing this exception and 'pskey record already exists' is coming. But there is no as such record created b4. there is some problem with buffer clearance. I am not getting any clue. Please help me out.
Thank you in advance.

Hi Manu
I checked your thread regarding the error message "cx_hrpa_invalid_buffer_access" while accessing HR_INFOTYPE_OPERATION. I am also facing the same issue, which i am working on for last 2-3 days.
Could you please shed some light, if you remember how you solved this?
Did you just used Buffer initialize Function module to rectify this error?
Your help would be highly appreciated.
Thanks,
Harish.

Short dump while loading statistics data - 'CX_RSR_X_MESSAGE'

Hi all,
When I am loading statistics data with Init selection, system gives short dump error. Below is the message-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
If anyone know the answer please share with me.
Regards,

Hi Preet,
Please find the details of short dump from ST22-
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
Regards,

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

There was a problem loading the application

I find that I can log into iCloud with no problem but after, that every time I try to open an app I get the message
"there was a problem loading the application"
I'm using Safari 7.0.5
This has been going on for quite some time and during that period I've read many threads and followed various trouble shooting guides but I can't solve it. I really would appreciate any suggestions that you might care to offer.

Downloading Safari 5.1.7 will work, or at least that's how I now access iCloud and run the Apps. IE9 64-bit will also work. On my system it appears that IE9 32-bit has a problem with iCloud due to Norton Internet Security. When Norton's "Browser Protection" is disabled, IE9 32-bit works for me.
With Safari, I set its Homepage to iCloud so I'd have a direct link to the iCloud website.

An exception was caught while scheduling the publication. (FBE60203)

Hi All,
Iam getting below error when am using publication to send doc to personal email.
Please advice me to find out the solution, thanks in adavance...
Error Message:
ERROR [PublishingService:HandlerPool-124] BusinessObjects_PublicationAdminLog_Instance_177746 - [Publication ID # 177746] - An exception was caught while scheduling the publication. (FBE60203)
com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreException: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'ScopeBatch177754' (ID: 177754). Please contact your administrator if you require this right.
cause:com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
detail:Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'ScopeBatch177754' (ID: 177754). Please contact your administrator if you require this right.

Hi,
This error messgae occurs when the 'Edit Objects' right is missing for the published reports.
These are the rights required to schedule a publication :
1. Login to CMC with Enterprise Administrative account
2. Navigate to Users and Groups >> Top-level security >> All Users
3. Add the required group/user facing the issue > Advanced > Add/Remove rights > General
4. Grant View objects and Subscribe to objects
5. Navigate to the folder where publication is there > User Security
6. Add/Remove Rights > At General level grant following rights:
- Schedule on behalf of other users
- Modify the rights users have to objects
- Edit objects
- Copy objects to another folder
- Schedule document to run
- Schedule to destinations
Regards,
Yosra

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!

Records was deleted at R/3 sys - getting error while loading the data

Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. M

hai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan

The exception 'CX_RSR_X_MESSAGE' was raised while loading the data

Similar Messages

Maybe you are looking for