The Executables are not pointing to the DataControl in the Page bindings.

Hi all
I am working in the Jdev 11.1.2.1 and weblogic 10.3.5.
I would like to inform you that,in my page bindings,the executables are not pointing to the Datacontrol and hence when i debug my page i am geting an empty page.
This is happening many times.
Inorder to solve this,i am adding one more executable to my executables and then when i c the executable pointing to the required datacontrol i delete the added executable.Then i am rebuilding the project and then i am running the page.Then i can see the page with the data.
This is happening many time and many times i did the same.
I want solution for this kind of problem.Why is this happening and whats the solution for this issue.
Please help me in this issue.

Hi,
I am not sure what causes this issue.
1. Are you using ADF Libraries (model projects are deployed and used). If yes, does it work fine if you refresh the whole application (in the application navigator) and then run the page to see if it resolves?
2. When you open up the pagedef in overview mode, do you see the Datacontrol? If not, try refreshing the datacontrol palette and see if it works fine after that?
3. What happens if you do a build->clean all and then run the page? Does it work fine then?
-Arun

Similar Messages

HT201413 I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

Hi there,
If you are experiencing an issues where iTunes is not recognizing your iPod, then I would recommend taking a look at the article below.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
-Griff W.

The App store tells me "all downloads are complete", however, the downloads are not loading and i still have the message "waiting" with no ability to complete the installations.

The App store tells me the downloads are complete, however, the føur items still show up on the Purchases page with the message "waiting" and are not loaded into the computer. I cannot even highlight the apps, nothing works.

Try disabling anti virus software and turn off the Firewall in System Preferences > Security & Privacy.
FYI... third party download managers will not work with the App Store.
From the App Store menu bar click Store > Check for Unfinished Downloads

I have transferd music from my ipod to my new computer and some of the files are not coming over, i have noticed the m4a files come across but the mp3 do not, any ideas how i can resolve this? thanks

I have just bought a new computer and i am transfering my music from my ipod onto my new computer, I have put the files from the music option from my ipod onto my computer. alot of the songs have come across, however there is alot of songs that havent. I have noticed that the m4a files come across but the mp3 does not. the new computer has windows 8 on it, which is very new to me. when i try and play the mp3 files, it will open them up in a different programme and will not open in itunes. does anyone know what i can do?!?!!?!?!
THANKS

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
BTW this is the iPod touch forum

HT204370 I downloaded 8 movies back in 2009. Now the movies are not playing and i cannot find the files for them. It shows that I purchased them but they will not play. How do I get them to play? This happened after updating my itunes.

<Edited By Host>

Try deleting the entries from the Movies part of your library (i.e. where you are trying to play them) and see if you get the cloud symbol next to them for re-downloading in the Purchased link
As your screenshot shows your account id I've asked the hosts to remove it

I have set up home sharing for my music, but the playlists are not available. I have made the entire library available via 'Preferences' but no success with playlists. Any suggestions?

I have set up home sharing for my music, but I can't access playlists, although I made the entire library available through 'Preferences'. Can anyone suggest a solution?

ok i actually got a id set up and allegedly home sharing is on but the thing is the ipod when syncing keeps saying it can only use one itunes library do i want to erase my songs? i do not want to erase my songs. my itunes library i originally used is on my other computer which has no more disk space to add music to and this computer the xp also has not enough disk space to put both libraries on .. PLEASE PLEASE help!

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done.

I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

You can backup the bookmarks on the old computer and create a JSON or HTML backup and restore or import this file in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
You can use an USB stick to transfer the saved bookmarks file to the new computer.<br />
You can also copy the places.sqlite file from that computer to have the bookmarks and the history.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

Usb driver on the left side near the lan are not working

The brightness keys are also not working and the usb drives on the left near the lan are not working.

Hi:
Did you reinstall the operating system?
If so, you are probably missing the graphics and USB3 drivers.
Graphics:
File name: sp56458.exe
USB3: Download and install both of these drivers and reboot.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...
If there is a device labeled SMBus Controller in the device manager, this driver should work for that device.
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_119081_1

MyApp was not installed on the iPhone "myPhone" because the entitlements are not valid

Just in case it help anyone. I was experiencing a problem where every time I attempted to add an app to my iPhone via iTunes, I was getting the error
MyApp was not installed on the iPhone "myPhone" because the entitlements are not valid
I have figured out the problem to be that the App ID which you fill in on the AIR for IOS Settings Deployment settings screen needed to be the App ID I had included in my provisioning profile. This setting appears to be auto-completed with the name of the Flash file so you need to be sure to change this if you are having this problem.
Hope that helps someone.....

First app could be a nightmare . So I repost
http://forums.adobe.com/message/3471632#3471632

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

The agents are not getting determined

Hi Gurus,
In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
Below are the steps followed:
We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

Hi,
Kindly Diagnose your WF:-
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
Kindly check and revert back, so that a solution can be provided.
Regards,
Kanika

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully received

Try using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie

The Executables are not pointing to the DataControl in the Page bindings.

Similar Messages

Maybe you are looking for