The expenditure organization is not active

Hi All-
I've got a strange issue importing timecards from our external system. Approximately fifty records have failed transaction import with an error message of 'The expenditure organization is not active.' The error message makes no sense because I've verified the following:
The expenditure org is active (no date restrictions)
The expenditure org is classified as both Project Expenditure/Event and Project Task Owning
The expenditure org exists in the hierarchy
I couldn't find any direct hits on Metalink, so I'm wondering if anybody might suggest other possible issues that I'm not seeing? Any other setups I should check?
Thanks in advance,
Joe

All --
It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
Joe

Similar Messages

  • The expenditure organization is not active for Expense Report

    Greetings to all,
    We ran into a problem, where a person submitted an expense report with project related information. The exp report gets an error in the workflow. When we look at the workflow error message is: This expense report failed payables validation.
    When we look at the notification for error message, shows the expense report and for the line that has a problem, gives the following error message:
    "The expenditure organization is not active."
    We check the org in HRMS, we look up the org and has the following setups:
    HRMS-->work structures--> organization (query the cost center)
    then when looking at the cost center has the following:
    under organization classifications:
    Project Expenditure/Event Organization
    Project Task Owning Organization
    HR Organization
    Then looking at hrms-->organization--->hierarchy
    query for hierarchy-->we get our hierarchy,
    then under organization-->query again for our main org, we see then the subordinates which we see the cost center again.
    Everything looks good our point of view.
    If have researched this issue on ML and have read the following notes: 423267.1, but this does not resolve our issue.
    If someone has encountered this problem, can you share the additional steps to troubleshoot this issue.
    Thanks in advance for any help on this matter.

    All --
    It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
    I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
    Joe

  • Invoices: the Expenditure Organization is not defaulting

    Hi All,
    Entering project related invoices in the invoice form, In Payables,
    navigate to either Invoices => Entry => Invoices or Invoices => Entry =>
    Invoice Batches, enter project and task information
    BUT
    the Expenditure Organization is not defaulting into the
    form.
    Do you know why this is happening.
    Regards
    Anoop

    You may get what you need from the profile option "PA: Default Expenditure Organization in AP/PO"
    Stephen

  • Photos have a ? in the top left hand corner.  When I click to reconnect files are found but the reconnect button is not active

    Mostr f my photos have a question mark in the top left hand corner.  When I go to <file> and click on reconnect the missing files are searched for and found but the reconnect button is not active. What can I do.  I m unable to edit these photos.

    jeglee
    What version of Premiere Elements are you using and on what computer operating system is it running?
    It sounds like you are in the Elements Organizer that came with your version of Premiere Elements.
    That ? in the top left corner of the thumbnail indicates a file that is no longer in the hard drive save location as it was
    when a copy of the file was included in the Elements Organizer.
    1. Do you know that the file(s) still exist? Could you have moved, deleted, or renamed file/folder involved? Can you go
    to the hard drive save location for the file and actually find it there?
    If you are working with Photoshop Elements instead of Premiere Elements, you have posted in the wrong forum. In that case, please post your thread in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
    Photoshop Elements
    If not, we will continue our exchanges of information here in order to resolve your issue.
    Thank you.
    ATR

  • Invalid Locator Segments-The expenditure organization information is invali

    Hi Gurus,
    Onhand quantity import from legacy to Oracle apps(11.5.10) is failing with the folowing error in the interface table, mtl_transactions_interface.
    Error Code: Invalid Locator Segments
    Error Explanantion: The expenditure organization information is invalid
    I did import successfully during my intial testing cycles though. But now after a month, trying to load the onhand quantities again, I am getting this error. Some setups might have been changed or any thing else could cause this error to show up?
    We are using project manufacturing and locator control as "Dynamic". I am using account alias receipt to import onhand balances.
    Thanks in advance,
    Kaju

    Hi,
    Please also see these docs.
    Note: 837730.1 - MTI Interface "Invalid Locator Segments" Error
    Note: 823164.1 - "Material transaction API returned error(Invalid locator segments)" Error when Issue Materials Across Workorders in CMRO
    Note: 110424.1 - Unprocessed Transactions/Closing INV Accounting Period FAQ
    Note: 210900.1 - Locator is Invalid or Missing for this Item/Organization/Subinventory Combination
    Regards,
    Hussein

  • The Database Link is not active

    try to be more clear, i'm in lack of ideas in this problem.
    I am following guide Oracle Database 2 Day + Data Replication and Integration Guide.
    I defined global_names parameter of remote database as true.In the step of "creation database link" i am getting error.(oracle enterprise manager 11g-->schema-->database links-->create)
    When i query on remote database(select * from global_name), I got orcl.
    So,In "Name" and "Net service name" field i specified orcl.Check radio button "Fixed user." and Username and password of remote database, and i got message "Database Link STRMADMIN.ORCL has been created successfully."
    But when i clicked on database link Name i got error, saying that
    "The Database Link is not active.ORA-02084: database name is missing a component "
    (Both dbs are oracle 11g.)
    Please reply.

    I think I am confused, "what should be Name and Net Service Name" while creating database link in context of "Database Replication." when global_names parameter is true in both database. I read somewhere "If the value of the GLOBAL_NAMES initialization parameter is TRUE, then the database link must have the same name as the database to which it connects." so what should database link name " should it be remote database name? db_domain?( or outtput of select * from global_name).......
    my tnsnames.ora on source db is
    ORCL.a.ernet.in =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = a.b.c.d)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL.a.ernet.in)
    when i connect user of remote database(a.b.c.d) from sqlpuls then it is connected.
    command which i give : sqlplus remoteUser/[email protected]

  • Im having problems with Safari 5.1.10. I often have several tabs open on screen. And after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?

    Im having problems with Safari 5.1.10. I often have several tabs open and after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?
    Kind regards,
    Faroek Abdoelrahman
    The Netehrlands

    Empty the Safari cache more often.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari to test.

  • Bridge will not now let me use camera raw, though I had been using it every day.  It says that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Bridge will not now let me use camera raw, though I have been using it every day.  It ways that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
    How To Get Help Quickly

  • HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active.  How do I fix that?

    When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not.  I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I am unable to unstack images with my Elements 11 as the stack option is not active.

    I cannot detach images from stacks with my Elements 11.  The stack option under the Edit mode is not active even after I have selected the image I want to detach from the stack that I want to email. Instead I end up with all the images in the stack being moved.
    I would greatly appreciate any help you can give me in this area.
    Thanks,
    Dwight

    Press Ctrl+D/Cmd+D to get back to the old Detail View. Stacks and versions aren't in the new Adaptive Grid view that shows the thumbnails edge to edge.

  • Safari browser connect me with the page I want, but the page itself is not active - how to unblock it?

    Safari browser connect me with the page I want, but the page itself is not active - how to unblock it?

    Try any or all of these standard fixes.
    Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit Safari. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • The table RSPFL_FDIR is not active in the dictionary

    Hi Everyone,
    When I am trying to edit the table RSPFL_FDIR, It is giving the Error message as The table RSPFL_FDIR is not active in the dictionary". Can somebody tell me how to activate this table.
    Thanks.

    Hello,
    Contact your basis team. Or do it yourself, just go to trx. se11 or se14 and activate the table.
    Regards,
    Jorge Diogo

  • Help!!! After the transition to iOS7 not activated!!!

    Hello. After the transition to iOS7 not activated prishet iphone 4s sim card is invalid, before all was in order. MD242DN/A     S/N  DNYAGM9U3DT7

    Hi James,
    Thanks a lot for the clarification. But I feel that the volume of my device has got reduced.
    Thats the reason why most of them are complaining like their speaker is not working.
    Will there be any reason for this issue related to ios7. I hope there should be something to be fixed to enhance the volume via an another update.
    Thanks.

  • My IPhoto is no longer allowing me to "publish" photos to Facebook, i.e. the "Publish" command is not active. Any suggestions?

    My IPhoto is no longer allowing me to pulbish photos to Facebook. When I select photos and Facebook, the "Publish" command is not active.

    Websites remembering you and automatically log you in is stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    Make sure that you do not run Firefox in Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    * In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
    * Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    * http://kb.mozillazine.org/Cookies

  • HT4993 I put my fingerprints in for set up, but the touch ID still not activated, how do I turn it on?

    I put my fingerprints in for set up on my 5S, but the touch ID still not activated, how do I turn it on?

    http://support.apple.com/kb/HT5883

Maybe you are looking for