The Expert view timeline sometimes zooms in when I drag a clip

The Expert view timeline sometimes zooms in when I drag a clip from Finder or the Project Assets panel to the Expert view timeline. The Expert view timeline zoom also zoom in if I drag the clip handles to trim a clip.
This behavior is working with Adobe Premiere Elements 10 on my MacBook Pro with retina display. I have found a fix for Adobe Premiere Elements 11 but not one for Adobe Premiere Elements 10.
I hope you have a fix for my problem.

mat96th
About a year ago I worked with a Premiere Elements 10 Mac user at a forum that I no longer visit. Same Timeline zoom issue. We tried several approaches including the one that works for Premiere Elements 11 Mac. Unfortunately, nothing worked to correct the problem in version 10 Mac. The user eventually went on to Premiere Elements 11 or 12 Mac.
But, just in case, have you checked the program's preferences for one that might be applicable to your particular situation. Unlikely fix, but worth a look.
ATR

Similar Messages

  • Fairly new to PP. When I drag a clip from the media browser only the video goes into the timeline. It doesn't allow the audio. What could I be doing wrong?

    Fairly new to PP. When I drag a clip from the media browser only the video goes into the timeline. It doesn't allow the audio. What could I be doing wrong?

    Its al in the targeting and source patching:
    Adobe Premiere Pro Help | Source patching and track targeting 

  • Running FCP6.06 on lion and losing one audio trac when I drag a clip to the sequence

    I was able to get FCP6.06 working on my new macBook pro with lion. Edited for over a week. Now it is acting up. When I drag a clip into the timeline only track 2 audio shows up. any ideas?

    Make sure the track selectors are connected properly in the patch section on the left part of the Timeline.
    -DH

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • Adobe Premiere Pro CC Timeline automatically zooms in when moving clips around

    This is an issue that keeps happening. It has been an ongoing problem with Premiere Pro CC and now 2014.1. It would start after working for a while on a project and become more frequent as the project gets larger. The only way to rectify the problem is restarting the computer. I would be working and I go to drag a clip around on the timeline and the timeline will automatically zoom in and thus place the clip in the wrong location. This happens when I am not holding down any keys. It will continue to zoom in every time I move any clips on the timeline and once it starts it happens on all sequences. While restarting the computer seems to help I have to do that 5 or more times in a day which can be very frustrating. It doesn't seem to be related to any OS, computer, hard drive/storage. Deleting preview files, flushing PRAM, trashing preferences doesn't help either. I usually work with Quicktime files AppleProRes Codec or H.264. Any help or insight into this issue would be greatly appreciated.
    Here is a video that demonstrates the bug:
    Premiere Pro Version: Every version from 7.0.0 to 8.1
    OS Version: Every version of Mavricks and Yosemite including version 10.10.1
    The footage I most use is H.264 and ProRes 422
    The problem occurs randomly throughout the day, nothing seems to trigger it. When it starts the only way to make it stop is to restart the computer
    Other software running at this particular time is” Mail, Evernote, Safari, OmniFocus, On The Job, Text Expander, Messages, Preview
    No third-party effects or codecs installed.
    Hardware:
    Mac Pro (Late 2013)
    3 GHz 8-Core Intel Xeon 5
    32 GB 1866 MHz DDR3
    AMD FirePro D700 6144 MB.
    No third-party I/O hardware.
    Mercury Playback Engine is turned ON

    Hi Patrick,
    Sorry, I've never seen that. What happens if you do not run any other software launched as you work? If you have time, please file a bug report: http://adobe.ly/ReportBug
    Thanks,
    Kevin

  • I'm trying to have the end times shows up when I print my calendar from the month view. As of now, when I print in the monthly view, it only gives me the start time of a meeting.

    I would like to have the ending times shown on my monthly calendar.  As of now, it only shows the start time.  The end times show up on the weekly calendar, but I don't want to print from the weekly view.

    Hi,
    I see two issues,
    1. the url is not correct for the image, www.mountjay.com/Home/MountJayDesign.jpg
    2. meta property should go in to head section, at the moment, it is under body (if you insert the code as html). go to page properties-> Metadata-> head. Paste this here, and check the site again,
    Please let me know if you have any other query.

  • No Audio When I Drag A Clip Into The Composition

    When i try to put audio into a composition it is removed and no audio comes up. It is not a RAM preview issue as there is no audio to play. When i import any clip into after effects it works fine but if i try to add it to a composition the audio is taken away and there is not even a waveform. I tried converting the audio to a .wav format but that still doesnt work. I have tried this with after effects cs6 and cs5 but the prblem is the same. I have a mid 2011 imac with an i5 processor. I have even tried using bootcamp and trying to use after effects on the windows side but i still have the same problem. Please help as this is getting frustrating and it's probably a simple issue.
    Thanks.

    Yeah, convert whatever kind of MPEG file you're using to something like Quicktime's PNG or animation codecs -- with audio, of course -- and try again.  MPEG files can contain multiplexed, or muxed, audio: the audio is embedded in the video, there's no separate audio track, so AE can't see it.
    Astounded by the large size of the file after conversion?  Get used to it.

  • I have photos in iphoto that can only be view in minimum zoom but, when I zoom out pics can not be view when clicked on

    When i open iphoto and the zoom is near the minimum, I can see all the photos, but when I move it towards the maximum range, the pictures disappear.  If I click on them I only see a blank, black screen.
    Someone help???

    Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • All of a sudden the games in facebook are zoomed in when I use IE they are fine

    Not sure what is going on I was in the middle of playing a facebook game and everything zoomed in including the letter size Don't know if I hit something or what happened I went to IE and everything is fine it appears to be a setting with firefox the main page in facebook is fine it is just in facebook flash player games

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • How do I stop the screen from magnifying or zooming in when I don't want it to?

    The screen keeps enlarging when I don't want it to.  How can I turn off this function in Lion?

    There are a few ways to get the screen to "enlarge", so it depends on what you are doing to make it happen.
    For example, on a trackpad you can double-tap (not click) with two fingers to zoom in web pages.  Or you can slide two fingers in a spreading out fashion to zoom in.
    Do you have any notion about what you are doing when the undesired enlarging occurs?
    charlie

  • The timeline on my Mac zooms when I add a clip to it.

    The Expert view timeline sometimes zooms in if you drag a clip from Finder or the Project Assets panel to the Expert view timeline. The Expert view timeline can also zoom in if you drag the clip handles to trim a clip.
    This behavior is most obvious when working with Adobe Premiere Elements on MacBook Pro with retina display.
    Adobe has posted the following fix.
    http://helpx.adobe.com/premiere-elements/kb/expert-view-timeline-zoom-in.html

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Zooming (expanding) viewer timeline

    My wording here is a bit weird because 'timeline' means something in particular, but how about the viewer's 'timeline' - does anybody know how to expand it? If in the regular sequence timeline one can zoom in / expand the time view with command-(- or +). When that command is used in the viewer it zooms in on the image, not the time. This has bugged me for years and I never really bothered to ask around.
    Rock on to all of you and thanks in advance,
    Josh
    FCP 5

    If you're saying what I think you're saying, expanding the window is the only way to expand the "viewer" timeline...
    Patrick

  • Why is my easy view and expert view not showing up in my controller assignments window

    when i go to contol surfaces and then select the controller assignments i do not have the option to hit the easy view or the expert view i was wondering if anyone knew why this is?

    Same solution as dplavin. Thanks!
    Afterwords there were some changes in Add-ons that were enabled/disabled that then had to be straightened out.
    I disabled Test Pilot which was in the process of testing thinking that it might have had something to do with the problem. I have not updated to the latest version of 5.0 because one favorite Add-on [Firegestures] is supposed to be incompatible.

  • Everytime I drag a clip onto the timeline and it like scales up?

    Okay, so ya know when you drag a clip onto the timeline and it asks you if you wanna change the sequence settings or keep them. I usually keep them but this time I checked dont ask again and now its zoomed in and I feel stupid!

    W cant help much with feeling stupid...
    But create a new sequence and start again is what we might advise.

  • In OS 10.3.1 calendar week view doesn't zoom like it used to

    Hi,
    my favorite view in calendar is the week view. And I had it zoomed rather small, so I had a good overview over my whole week (especially, do I have an appointment in the evening). After the upgrade to 10.3.1, at least the week view refuses to zoom as small as it did, so I can only see the time from 9 to 5 without scrolling.
    I know, I couldn't read the appointments any longer (on a Z10), but that was ok for me. I loved the overview with one glance. So why do you remove this possibility? If you don't like it that small, just stop zooming. For me the advantage of the small view outweighs the disadvantage of someone accidentally zooming too far. So please bring it back :-).
    Thanks!
    Michael

    Same problem with my z10 since 10.1 OS update. Please help.

Maybe you are looking for