The export operation failed to create an image file

I've been experiencing bizarre behavior when attempting to export images to my Usb-connected card reader. After reading some threads on this form, I was convinced that my reader was defective. Same problem on a brand-new reader.
The specific behavior was as follows: I attempted to export roughly 150 custom-named 500 KB image files to the memory card. The last 15 or so failed to transfer and I got the message, "the export operation failed to create an image file for the versions identified below."
Trashing VP list didn't help. What did was changing the custom name. There was nothing particularly unusual about the original custom name and the new one was virtually identical. After changing the name, the export worked without a hitch.
Has anyone experienced similar behavior? Any ideas what's going on?

problem was that the NEW card reader was faulty as well. My luck!

Similar Messages

  • Flash CS6, QuickTime: The export operation failed because it ran out of memory.

    Exporting a QuickTime movie file seems to be an old issue with previous versions too. In CS6 I always get the error message: "The export operation failed because it ran out of memory." I've got tons of memory and have allocated increasing amounts to the cache with no success.
    My small and fairly simple file was created with Flash CS5 which seemed to work fine at the time of creation. I've tried everything recommended online but with no luck so far. BTW, I reinstalled CS5 and tried that too but it just hangs now, and there's no error message.
    Does anyone have a solution?
    (OS X 10.7.4)

    If I may join this discussion...  I loaded up CS6 two days ago and have just completed my first 60 second animation using it.  Like everybody else here, it all went fine until I tried to export it to QuickTime – something that has never been problematic before. 
    I ended up exporting it as a swf and opening that in CS4.  Then I could export it, but the resulting QuickTime movie was over 500 MB in size!  Okay, so then I opened it in QuickTime Pro and exported it from there.  This brought the file size down to a far more reasonable 35 MB, but now the soundtrack has gone!  So now I am having to replace the sound in Final Cut Pro. 
    This is a real palaver – and not conducive to heaping praise on CS6 when questioned.  I note that there is talk of Adobe rectifying this "bug", but it would be really good to hear from somebody at Adobe with:
    a) An apology
    b) An estimated time of delivery
    c) A best practice work round
    But I'm guessing that anybody that works at Adobe will be the last person to read this...

  • HELP! FLASH CS6 "The export operation failed because it ran out of memory"

    Hey guys, really need your help on this one. I can't seem to export my flash animation video. It kept failing and prompting that "The export operation failed because it ran out of memory"
    Anyone knows a solution to this. It will be very much appreciated.
    Thank you very much.

    Hi,
    It totally depends on what's the content you are trying to export. The reason is as simple as it says. The content might be really huge that it ran out of memory. Any info you can provide on the kind of stuff you have in the file?
    - Hemanth

  • "The export operation failed because it ran out of memory"

    I'm trying to export from Flash CS5 to an mov.
    Project is in custom size (874  x 480) but when saved to SWF it's not really
    that big (15mb). So I'm a little confused.
    Anyone encountered this error message?
    This is quite new to me.
    I've got 2 HD on my mac with each having at least 2Tb available each,
    so don't think its that.
    Memory is 8GB and I got nothing running except the Flash CS5.
    Need some help my friends. Client

    Not sure if your problem has been solved. Flash is flat broken on this. I am using CS6, same problem, same headache. Adobe should be ashamed for not fixing this issue. Someone even suggest to use third party screen capture tool like Camtasia? Why don't you just remove the Export from your Flash menu all together if anything beyong 30 seconds of video export would fail?
    In the meantime, Try download Swivel from cnet. The app will happily convert your SWF to anyformat you like. Both Mac and Windows version are available. This was one of the best life saver I ever downloaded from cnet.
    HTH

  • DSO activation failed due to creation of the export datasource failed

    hi experts,
    i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
    there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
    I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
    please advise, thanks!
    attach error info:
    The creation of the export DataSource failed
    Message no. RSBM035
    Diagnosis
    The system could not create DataSource .
    System Response
    The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
    Procedure
    Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
    The delta process ODS does not exist
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object ZFIM_D09

    Hi,
    As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
    Regards,
    Durgesh.

  • Transport Error-The creation of the export DataSource failed

    Hi Experts,
    I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
    The creation of the export DataSource failed
    Reading the Metadata of APMD0009 ...
    Creating DataSource 8APMD0009 ...
    Password logon no longer possible - too many failed attempts
    Password logon no longer possible - too many failed attempts
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object APMD0009
    the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
    I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
    Has any one come across this kind of an issue.
    Thanks in advance!!!!!
    Regards,
    Umesh.

    No it didnt seem to work still got the same password error..                                                                               
    Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)              
    /     The creation of the export DataSource failed                                                                 
          Name or password is incorrect (repeat lo gon)                                                                
          Name or password is incorrect (repeat lo gon)                                                                
          Error when creating the export DataSource and dependent Objects                                              
          Error when activating DataStore Object 0BBP_BID                                                              
    /     The creation of the export DataSource failed                                                                 
          Name or password is incorrect (repeat lo gon)                                                                
          Name or password is incorrect (repeat lo gon)                                                                
          Error when creating the export DataSource and dependent Objects                                              
          Error when activating DataStore Object 0BBP_QUO                                                              
    /     The creation of the export DataSource failed                                                                 
          User not authorized. Session terminated                                                                      
          User not authorized. Session terminated                                                                      
          Error when creating the export DataSource and dependent Objects                                              
          Error when activating DataStore Object 0PUR_DS03                                                             
    /     The creation of the export DataSource failed                                                                 
          Name or password is incorrect (repeat lo gon)                                                                
          Name or password is incorrect (repeat lo gon)

  • The creation of the export DataSource failed

    Dear All,
    Can u give me the some information to fix the following error which i got while moving Multicube from Dev sys to Prod. sys. multi cube consits of lot of ODS object as dependent objects.
    Error FYI.
    The creation of the export DataSource failed
    RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
    RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
    Error when creating the export DataSource and dependent Objects
    Error when activating ODS Object 0CRM_CN2P
    Regards,
    Veeru.

    Hi Srinivas,
    If itz SS problem i can able to transport the other objects like cubes, Info Obj.. etc. only while transporting the ODS obj it is showing
    can u help me on this.
    any way i wil chk with basis team and ask to reset PWD.
    Regards,
    Veeru.

  • ODS activation error( The creation of the export DataSource failed

    Hi Friends,
             i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
    1.The creation of the export DataSource failed
    2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
    3.Error when creating the export DataSource and dependent Objects     
    Any help would be appreciated
    Thanks

    Seems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
    Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
    cheers,
    Vishvesh

  • "The attempted operation failed. An object could not be found" error when double clicking on an ics file

    Operation System: Windows 8 Pro
    System Type: 64-bit Operating System
    Office: MS Office Professional Plus 2013
    I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
    that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
    1-) Open up the Control Panel and go to Mail section
    2-) Click "Show Profiles"
    3-) Click "Add" and give a name to your profile.
    4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
    5-) Finally, set that profile to be used always.
    Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
    Is this a known issue or specific to me?
    Thanks!

    yes, I have the same problem.
    The workaround of saving the ICS file and then importing it into the current calendar
    works, 
    but the ICS calendar
     displays in other section, NOT in the section of my old events.
    why  ??

  • The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02

    Hello Expert,
    I have an issue with the export data source creation,
    This is the detail,
    Thank you very much in advance for your kind help,
    The creation of the export DataSource failed
    Message no. RSBM035
    Diagnosis
    The creation of the DataSource &v1& was unsuccessful.
    System Response
    Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
    Procedure
    Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).

    Niurka,
    Is this datasource for a hierarchy? See if note - 403092 is relevant.
    Viren

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

  • Moving big files(600MB) with FTP Adapter error The IO operation failed

    I everybody, I have the next trouble:
    I need to move big files from one server to another remote server through ftp protocol. All the configuration is correct and I am able to move little files
    with no problem, but when I move big files the server shows the next error:
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'readEBS'
    failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][NONE]" IO operation for "/tmp/TestLogSOA/DetalleCostos3333333.dvd"
    failed. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_NOTA start() failed on
    resource 'SOADataSource_ohsdomain': XAER_NOTA : The XID is not valid oracle.jdbc.xa.OracleXAException at
    oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1532) at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:321) at
    weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:51) at weblogic.jdbc.jta.DataSource.start(DataSource.java:722) at
    weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1228) at
    weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161) at
    weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:297) at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507) at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434) at
    weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1592) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1496) at
    weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396) at
    weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355) at
    oracle.integration.platform.xml.XMLDocumentManagerImpl.getConnection(XMLDocumentManagerImpl.java:623) at
    oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:208) at
    sun.reflect.GeneratedMethodAccessor1534.invoke(Unknown Source) at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at
    org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at
    org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at
    org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at
    org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy285.insertDocument(Unknown Source) at
    oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:244) at
    oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:99) at
    oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:773) at
    oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1106) at
    oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:502)
    at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:356) at
    oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:171) at
    oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139) at
    oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179) at
    Thanks!!!

    Hi idavistro,
    You can try setting the XA Transaction Timeout for SOADataSource.
    1. Log in to the WebLogic Admin Console.
    2. Select in the left tree: Services-> Datasources-> SOADataSource->Transaction.
    2. Select Set XA Transaction Timeout.
    3. Set XA Transaction Timeout to 0.
    4. Restart the server and check if the error still appears.
    Regards,
    Neeraj Sehgal

  • The distribution agent failed to create temporary files in 'C:\Program Files\Microsoft SQL Server\110\COM' directory. System returned errorcode 5.

    One of my replication job failed with below error, which means job failed because of permission issue on the folder. To resolve that, I have granted the permission and it started working fine. Now the question is as my job was running fine since long time
    without any issue then how suddenly the permission of the folder got omitted automatically? I am sure that no one deleted the permission from the folder and as the server is part of SQL cluster no failover occurs.
    Error:-The distribution agent failed to create temporary files in 'C:\Program Files\Microsoft SQL Server\110\COM' directory. System returned errorcode 5.
    Rahul

    Hi Rahul,
    Error code 5 indicates that the error is "access is denied."  Please make sure that the COM folder is excluded from any antivirus scan that occurs on the system.
    If the issue still persists, I recommend you use
    Process Monitor to find out a bit more about the accounts and access requests involved. Then grant write permission to the exact COM folder for the account that is running the SQL Server Agent service. For more details, please review the following similar
    thread.
    http://www.sqlservercentral.com/Forums/Topic1364832-1550-1.aspx
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.

  • Memeber server in a domain connected with external trust. The agent operation failed, DPM could not communicate with the DPM agent. Error ID 270

    I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int,  is in.
    I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmserver.domainA.int
    I successfully ran attach-productionserver.ps1 in DPM Management Shell.
    When I click refresh in DPM 2010 Administrator Console/Management/Agents I get error id: 270
    The agent operation failed on myprotectedserver.domainB.int because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
    If myprotectedserver.domainB.int is a workgroup server, the password for the DPM user account could have been changed or may have expired.
    I can ping myprotectedserver.domainB.int from mydpmserver.domainA.int
    DPM 2010 backup of the domain_controller.domainB.int works fine.
    The application log on myprotectedserver.domainB.int does not show any DPMRA related event logged.
    The firewall on myprotectedserver is off.
    Computers in domainA and domainB use their own networks connected through a router.
    from mydpmserver
    net view \\myprotectedserver.domainB.int /all - successfull
    sc \\myprotectedserver.domainB.int query  OpenSCManager FAILED 5, Access is denied
    wmic /node:myprotectedserver.domainB.int OS list brief Error 0x80070005, Access is denied
    from domaincontroller.domainB.int:
    sc \\myprotectedserver.domainB.int query  successfull
    wmic /node:myprotectedserver.domainB.int OS list successfull
    Any suggestions on how can I fix this?

    Hi
    I know this is old but are you still having a problem?

  • While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

    Hi,<BR>While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". <BR>Pls advice us that what is this error and how to resolve this.<BR><BR>And Which log is to be referred for the details.<BR><BR>Thanks<BR>Ravi

    If a form is invalid it generally means that one of the dimension references is missing.<BR><BR>Can you get in to edit the form?<BR>If you can, see if you can preview it. I suspect you will not be able to.<BR><BR>If not, check all dimension boxes have at least one member against them.<BR>If you have multiple rows and/or columns check all of them too.<BR><BR>I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it.<BR><BR>Hope this helps.<BR>

Maybe you are looking for

  • How long is the power cable?

    I'd like to know how far away from a power socket can I place this camera? 

  • Trying to end a class

    While trying to end a class I get an error that states: class, interface or enum expected the following closing statement is used } // end class Employee the following is the entire code // Employee.java //store and recall payroll info import java.ut

  • Annoying audio delay with AirPlay

    I'm very displeased to report that there's a tiny (and yet extremely annoying) delay in the audio played from a Sony Home Theather HT-CT150 connected via HDMI to an Apple TV with AirPlay compared to the sound from my iMac.  I've tried changing all th

  • System Tray Icon Not Displaying - Depending on Launch Style

    Good Morning- I'm using the java.awt.SystemTray and TrayIcon classes from 1.6 to create a system tray that acts essentially as a temperature monitor. It's very little code. When I test it from Eclipse, it works great. When I double-click the .jar on

  • How can I stop Buffering on my Ipad2?

    My Ipad buffers very often when watching a video...how can I stop this?