The eye icon on my layers are not turning off and on. why is this?
I use Photoshop CC. Here is what I did:
I first did a duplicate layer of the background and did a high pass filter on it, I then opened a new layer with a visible stamp on it and did some clamp tool changes and some patch tool changes and some dodge and burn changes, I then opened another new layer with a visible stamp on to blur my background. Following that I did a few new layers (without the visible stamp) to add some definition to my subject's eyes and grouped them. Now when i try and see what my photo looked like before, by switch the eye icon off, it doesn't work. Why is this??
If you made changes only above the background layer ans did not change the background layer when you turn the visibility of the layers above the background off you should see your original image. Some screen captures showing the steps and layer stack in the layers palette would be helpful. A stamp visible layers layer will cover what in layers below make sure all layers above the background have their visibility icon off. So only the background layer is displayed.
Similar Messages
-
My IPhone has been charged for at least 3 hours still showing the low battery icon and not turning on, normally when my phone is in low battery it will automatically pop up the apple icon but now it's not turning on someone pleaseeeee help me! Thanks!
Hi Windy08,
If you are having an issue with charging your iPhone, you may want to start your troubleshooting with the steps in this article -
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
My daughters ipod touch will not turn off and is frozen on the Apple icon screen. Tried to update software, didn't work. Tried to restore, didn't work. Does anybody know what else to try?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I've been given under warranty what us supposed to be a new iPhone 5. When I try and restore it from my iCloud it keeps asking me to sign in with two other Apple ID's that are not know to me. Why is this?
Adding to KC7GNM's remark (with which I agree), the iPhone 5 you received is very likely refurbished. It is not brand new out-of-the-box, never before used.
-
Ever since I downloaded the new iOS 7 my screen will not turn up and down and it rotates on its own side to side.it will not face the way I want it to go. How do I fix it?
I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!
-
Hi, my iphone power button doesnt work. Its not turning off and is getting hot since the screen is not turning off.
Use the assistive touch controls
General >. Accesabilty >> assistive touch -
My ipod naaIno is stuck in the lock position, my hold switch will not turn off even when I move it. I have tried restoring it and resetting it and it still comes back on in the hold/locked postion. It will only play when placed on a docking station and then I cant scroll to pick songs, I can only go to next song using buttons on docking station.
You will need to have the hold switch replaced.
-
hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service. -
Very big icons on my screen. Have turned off and on. Cant get rid off. Cant downsize screen to enter my pin. Sems blocked or stalled. What to do?
Double tap with THREE fingers to turn zoom off. Then go into Settings>General>Accessibility and turn zoom off for good.
-
I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading. -
Hi I just upgraded software through iTunes then unplugged iPhone now it is stuck on the connect to intunes screen, it won't turn off and iTunes and my computer won't recognize my phone? Please help
My phone is doing the same thing. My computer acknowledges that I have connected my iPhone 4, however, iTunes will no longer connect or sync to my iPhone 4. I have uninstalled iTunes, Bonjour and all Apple products from my pc. I have re-installed them back on. I have reset my phone. I have emptied my temp folder. I have done everything. If my iPhone cannot update and sync with iTunes then I may as well get another phone from somewhere else. I am disappointed that I cannot resolve this issue.
Rebeccaspe31, were you able to resolve your issue? If so how? -
I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to how I can fix this?
If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''scan''' and pause while the list is filtered
(3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
Firefox now should ignore Windows' download security. Does it change how Windows handles the file? -
Macbook air's fan not turning off and it will not sleep when the lid is closed?
I downloaded OS X Mavericks yesterday.The fan will not turn off. It runs whenever i turn on the computer. The computer does not turn off when i close the lid, and the fan still runs. There is also no battery icon anymore on my home screen. Is this just a bug with Mavericks? My computer is a mid 2012 edition.
Resetting the System Management Controller
-
My iPad will not turn off. I have done the off/sleep key home button procedure.
Just to be perfectly clear, when you reset the iPad by hod,ing down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, that is a way of resetting the system and restrating the device. If you want to shut down, you still have to hold down on the power button until the slider appears and then slide to the right to shut the iPad off.
IS this what you are doing and if so what happens when you try to shut down? Describe what happens in detail. -
My itouch is stuck with the apple symbol as if it was downloading something. I have tried to reset it by turning it off but it will not turn off. Any suggestions?
Hi,
Try placing your iPod in Recovery Mode and restoring it via iTunes: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---
Maybe you are looking for
-
How to pass text to Material Sales text, item note, while creating a sales
hi , i tried my level best with the help of friends (SDN). but i am unable to reach the target. my requirement is to enter text into 1) material sales text 2) item note 3) packing note 4) delivery text 5) purchase order t
-
Hi I have a requirement where i need to post a warning message based on the date difference between Invoice date (BKPF-BLDAT) and posting date (BKPF-BUDAT) while posting a document in tcode FB60. I tried using the tcode GGB0 to build a validation but
-
Organizing all equipment to one account
Somehow I have ended up with a separate iTunes acct of my iPad and my iPhone - how can I merge all to one and use iCloud?
-
Photoshop CC / 3D - Wrapping a graphic around a cylinder without repeating.
I'm trying to wrap a label around a 3D bottle by inserting the label as a diffuse texture. I am able to position and scale the label proportionately, however instead of wrapping around the bottle once, it's repeating twice. I've tried fooling with th
-
This is my woe, about restoring corrupt iPod
someone, please help me, and apple, if you're reading, we need a fix for this, i have seen it in other forums and threads as well i think I have an iPod w/ click wheel 40 GB bought in December 2004 (so clearly out of warranty). Day before yesterday,