The fan on my air Processor 1.7 GHz Intel Core i5 seems like it on all the time and loud
the fan on my air Processor 1.7 GHz Intel Core i5 seems like it on all the time and loud
Fan
The computer's fans run at high speed although the computer is not experiencing heavy usage and is properly ventilated.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.
Similar Messages
-
how do I find out which battery is right for my mac pro 13 inch Processor 2.4 GHz Intel Core i5 late 2011 model
You could try ringing apple and seeing if they will give you a model number for the battery and then find one on google. Or you may even be able to order one from apple themselves.
They have support numbers for all over the world, in case you don't have the number you need, this is the support number website with all the numbers all over the world:
http://support.apple.com/kb/HE57?viewlocale=en_US&locale=en_US -
Hi
Hi I just got my new Apple TV and I cant figure out how to connect it with My MacBook Air (11-inch, Late 2010- Processor 1.4 GHz Intel Core 2 Duo) OSX Version 10.8Are you referring to mirroring or you just unable to set up homesharing.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi. -
Problem
High running Temperature
Specification
iMac 27 inch
Mac OS X Includes Software Snow Leopard upgraded to Mountain Lion OS X 10.8.03 (1278)
251 GB Flash Drive
2 TB Sata disk
Processor 3.4 Ghz Intel Core I7
Memory 16 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970 2048 MB
Video: Software Final Cut Pro X 10.0.8
I use the imac mainly for editing Video which when doing so it has reached temperatures of near to 60° C which causes the program to become unstable and needs to be cooled down to operate correctly.
An Apple technician (by phone) advised me to download an smcfancontrol. This allows each individual fan to increase speed and also advises the current temperature at °C. The smcfancontrol has been downloaded but this has not resolved the problem. By increasing the speed of the fan more heat is generated and creates additional noise.
I have since taken the iMac to an Apple Store for examination as suggested by APPLECARE when the fans were found to be working correctly. An Apple Store technician carried out a test, but not whilst working under the pressure of FINAL CUT PRO when the iMac generates a high temperature.
The Temperature Specification for this model is
Operating Temperature 20 °c to 35°C
Storage Temp.47°c
Clearly the temperature my iMac is operating at is excessive and could cause the computer to break down prematurely. Has anyone experienced this problem.
Frank HowellWhen was the last time you cleaned/vacuumed out all of your iMac's vents, slots and ports.
You need to do this with the iMac powered down, disconnected from power and everything disconnected.
Lay your iMac, screen down, on a soft surface, like a heavy towel. Use a small electronics vac, or portable or full size vac with hose and a crevice tool attachment and carefully and slowly vacuum every vent, slot and port on your iMac.
Then reconnect everything up, power up and download and install iStat Pro. Start working, then report the temps of your iMac after this has been done.
When using SMCFan Control, it is important not to run the fans at too high an RPM. This doesn't generate heat on its own, but will suck in more dust, lint and dirt into your iMac, and that will be the cause of additonal increases in heat.
I run my fans in the range of 1400-1600 RPMs. You can go as high as 1800 RPMs but it is important to keep the RPM range below either 1800 or below 2000 RPMs.
I, also, run a very small desktop fan pointed toward the upper back of my iMac to keep temps down even further. -
On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result -
Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% AppleSpell
0% SystemUIServer
0% powerd
0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passedPlease describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
I am using Xcode 5 on Mac Book with configuration Memory 5 GB 1067 MHz DDR3 and Processor 2.4 GHz Intel Core 2 Duo. It hangs every time whenever i work on Storyboard and even on clicking on any of the controller it takes time to open. As my storyboard consists of 25 scenes. I searched a lot but did not get any results . I have upgraded my xcode to xcode 5.0.2 which is bug free as compare to xcode 5. Please help I m struggling with this problem a lot.
iTunes for Mac
http://support.apple.com/en-us/HT201693
http://www.apple.com/itunes/download/
Was it installed before? Does it show up in Software Update?
Do other updates show up there (realizing that Lion is not getting all the updates anymore as it is no longer being supported).
Apple Downloads
- Always a place to manual download.
MacBook Pro
Mac OS X Lion System Communities -
I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.
First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
is my imac with processor 2.4 GHz Intel core 2 duo with memory 1gb 667 MHz DDR2 SDRAM compatible with lion????, is my imac with processor 2.4 GHz Intel core 2 duo with memory 1gb 667 MHz DDR2 SDRAM compatible with lion????
According to the Lion webpage, you would need to add more RAM to your computer and check to make sure you have about 7GB of free hard drive space.
The page can be found here if you need more info:
http://www.apple.com/macosx/specs.html -
Edit menu Copy function greyed out MSword 2011, v14.1.0 (after I updated to OS X 10.9.5; 4GB 1067 MHz, Processor 2.53 GHz, Intell Core i5)
The copy function under the edit menu is gone (greyed out) and the short-cut, "command + c" doesn't word. I can only copy by using the copy button on the formatting toolbar, which is slow & annoying. All after I ungraded to Maverick. I've tried several different solutions. Any suggestions? I've tried several solutions, but nothing has worked so far...Try posting in the Microsoft forum
http://answers.microsoft.com/en-us/mac?auth=1 -
Aperture 3.5 repeatedly crashes when cropping or editing. 10.9.4 on a 24" iMac early 2009 Processor 3.06 GHz Intel Core 2 Duo. Crash report: Processor 3.06 GHz Intel Core 2 Duo. Able to edit 3 or 4 photos before crashing again. Repair run multiple times. Can't copy/paste crash report -
any ideas?Yes. Just updated to 10.9.5 and 3.5.1 and crashed again. Only half of available memory on computer is being used.
How do I copy the "problem report"?
thanks very much -
Mac OSX for the 13-inch Early 2011 Thunderbolt 2.3 GHz Intel Core i5 model.
I got a refurb MacBook Pro two days ago.
It is the 13-inch Early 2011 Thunderbolt 2.3 GHz Intel Core i5 model.
It came from Apple with Mac OSX 10.7.1 Lion installed on it (and no media on disks).
According to EveryMac.com this model originally shipped with Mac OSX 10.6.6
The "Whats in the box" lists the software on DVD as one of the parts that should have been included but there was no disk with the MacBook.
Was there or wasn't there an actual software install media disk for this model ??
The fan runs at about 2000 rpm all the time.
Is this normal ??
Mike10.7 Lion doesn't have disks, but a Recovery Partition accessible by holding command and r keys upon booting.
You need a internet connection, fast, strong and relaible to download Lion from Apple servers.
Since that machine came with Snow Leopard originally, you can call Apple with your serial number (AppleMenu > About this Mac > More info) and request new copies of the 10.6.x grey disks.
You can learn more about Lion by visiting these links
https://support.apple.com/kb/HT4718
https://support.apple.com/kb/dl1433
https://discussions.apple.com/message/16276201#16276201 -
I have a Mac OS X 10.6.8 Processor 2.8 GHz Intel Cor i5 does it have and intel chip or PowerPC processor? The example given to have this chip was an i7 not sure if that is necisary or if the "intel core" is what is required.
The word Intel means that it has an Intel CPU.
(96645) -
The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?
Take it to an Apple Store or other service provider for testing.
-
Can I upgrade my processor 2.4 GHz Intel Core 2 Duo to 2.66 GHz Intel Core 2 Duo
Can I upgrade my MacBook Pro (Spring 2010 Edition) from a 2.4 GHz Intel Core 2 Duo processor to a 2.66 GHz Intel Core 2 Duo? Where is the best place to have this done? Can I get a credit for my 2.4 GHz Intel Core 2 Duo Processor or sell it on line?
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0B
SMC Version (system):
1.62f6
Serial Number (system):
W8024Q4EATM
Hardware UUID:
1EB19DF4-1AF2-52F4-BBCD-52C847653B2F
Sudden Motion Sensor:
State:
EnabledI was to ask the same with my processor. I just upgraded my hard drive to 750GB, and replaced my battery, but I am still getting the spinning beachball. Im happy to just replace the processor if this ball goes away. I do have 250GB free on it. and Im not doing much with this machine other than the occasional iMovie render.
Model Name:
MacBook Pro
Model Identifier:
MacBookPro6,2
Processor Name:
Intel Core i5
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache (per core):
256 KB
L3 Cache:
3 MB
Memory:
4 GB
Processor Interconnect Speed:
4.8 GT/s
Boot ROM Version:
MBP61.0057.B0C
SMC Version (system):
1.58f16
Serial Number (system):
W8*******AGX
Hardware UUID:
Sudden Motion Sensor:
State:
Enabled
So, same story for me too? No way to go up? But a replacement is ok?
Cheers, and thanks kindly in advance.
Dan
<Edited by Host>
Maybe you are looking for
-
Dynamic value help for a table field to fill two fields, how to?
Hi all gurus, In SRM 7 I defined a dynamic value help for a single field (ZZ_PROLE_R3) of my header custom table. That's the code from WDDOMODIFYVIEW in the webdynpro /SAPSRM/WDC_DODC_CT, view V_DODC_CT: DATA: lo_tabnode TYPE REF TO IF_WD_CONT
-
I have a lot of users in my application (say 10000) and I need to access DB for each of them with there own username and password. I store my users in a LDAP, how can I use it to authenticate these users on DB. Will there be a problem with creation o
-
Cancelling 2nd .MAC email address but keeping name as alias?
I've got a .mac email address which is my primary email address. But I opened a second email address as a business email address. All the mail goes to the same account. But now I'd like to cancel my second email address and re-open it as an ALIAS in
-
Windows 7 installation went wrong - lost Mac OS X?
Hello, PLEASE BE PATIENT AND READ WHOLE TEXT. I went through the windows 7 installation process and i installed windows but unfortunately i can't find my mac os x anymore! When i restart and press option key button black screen appears that lasts for
-
I actually have 2 questions. 1.) I removed the two standard stacks that came with OSX and (of course) I want them back. How do I do that? 2.) I have about a dozen little "time waster" games that I play regularly I would like to create a stack that co