The fan stops after the Satellite U500 - 10Jwas turn on

Hello! I need help!
The fan stops after the notebook ws turn on and my Toshiba laptop computer is giving me the warning "A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service".
The fan works several minutes and stops.
I clean out all dust, I didn`t anything with software and hardware.
What the reason of this?

Thank you, very good advice)))
The mod.Satellite U500 - 10J (I can`t find it on toshiba`s support page)
Toshiba service always takes a lot of time and I have`t this time because I can`t work without this laptop.
I just want to understand why he stops if he can works. For example, today fan was working during 3 hours(everything was good) and had stoped when I went out to the kitchen. After that the CPU temp becames high and I turn it off.
I don`t know what happens, there no a lot of processes, I don`t play in hard games, just surf and office.

Similar Messages

TS5181 Why does the music stop after the song starts?

In iTunes Radio, a song will start playing, then it stops. How can this be fixed?

- Try unsyncing and then resyncing all the music
- Reset the iPOd. Nothing will be lost
- Restore from backup
- Restore to factory defaults/new iPod.

I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath

The fan stop working

the fan stop working and the guaranty finish last week i dont now what to do

Hi
Please try these steps given below if issue is not resolved you might have to replace the Fan.
1) Clean the Vents of the Fan using a air blower.
2) Try to update Bios from HP website.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

When using my new nano 7 with nike , my music stops after the 30 minute voice alert even though I have set my run for over 30 minutes.It cancels/deletes my run/workout when the music stops.This has happened several times.How can I keep this from happening

When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes. It also cancels/deletes that run/workout. This has happened several times. How can I keep this from happening?

If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
Take it to a servicing dealer and wait for it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

How to stop the boot process after the GRUB menu?

Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.

zuargo wrote:
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.
I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
It is explained in the systemd manual:
http://www.freedesktop.org/software/sys … stemd.html

Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

My MacBook will not play videos. No sound and the video stops after a few seconds.

My Mac book pro will not play videos. No sound and the video stops after a few seconds.

Hello GrahamBIOM,
I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
Please respond back at your earliest convenience with results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook? the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook? The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

same issue, looks like nobody answered you from last JULY....

I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion

I have Snow leopard, 10.6.8 on my iMac, I just tried to install Lion from the App store, but during proces, the install stops after one minute saying: "software might be damaged". I downloaded the software again, same thing. What must I do to install Lion? I have still 487GB free.

Quit all other programs and open Disk Utility
Select your "MacintoshHD" drive on the left and indented and click Erase > Erase Free Space > Zero and let it complete.
Also run First Aid > Repair Disk and permisisons.
If Repair disk gives a error, you have a bigger problem, if repair permisisons fixes and completes, even if it fixes the same thing twice if you click it again, it's ok. Apple just changed things.
You should be able to download the file sucessfully this time, if not, take it to another location with better/faster internet.
If not then run through this list
Step by Step to fix your Mac

Hi , I just bought robert kiyosaki financial iq audiobook from ITunes but the sound stop after 5 minutes playing. Can someone assist me please?

Hi , I just bought robert kiyosaki financial iq audiobook from ITunes from my iPad but the sound stop after 5 minutes playing. Can someone assist me please?

Have you tried copying it to your computer's iTunes via File > Transfer Purchases and seeing if it plays ok on your computer ? If it does then try deleting it from your iPad and then sync it back and see if it then plays. If not then you could use the 'report a problem' link from your purchase history : http://support.apple.com/kb/HT1933

HT203167 My iTunes Match does not work, it stops after the first step and won't do anything else!!!

Hello, I purchased iTunes Match for my new iPhone five and it is intended to move the music from my computer to my other computer, but it stopped working on my MacBook Pro, it stopped after the first step. So, my question is, can iTunes Match work if the iTunes in question has other accounts attached to it, of not, can I get a refund on a service that does not work?

I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!

Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

Enforce to send the messages pending, after the Time To Deliver is changed

JMS Queue is being used to send data from our database to the headquartersâ€™ database.
          Our organization considers using "Time To Deliver Override" during the scheduled downtime of the headquartersâ€™ database. For example, when our admin is informed by the headquarters' admin that downtime is scheduled, our admin can change "Time To Deliver Override" from -1 to 1200000 (20 hrs) in WebLogic Consol. Then, when the database is back, our admin will reset the value to -1.
          It is simple and quick. However, I realized that the messages pending will not processed for the â€œTime To Deliverâ€ which was configured when the message was added.
          Can WebLogic enforce to send the messages pending, after the "Time To Deliver Override" is changed back to -1?

A few related points:
          - I think 9.x may provide mbean/JMX/administrative options to change time-to-deliver in existing messages - but, even if it does, this seems unwieldy.
          - 9.x also provides options for adminstratrively pausing delivery of a destinations messages, and/or pausing MDBs.
          - I think the "time-to-deliver override" also supports setting absolute times via cron like schedules (eg - you can configure it so messages are born at a specific time.)
          - Another option is to introduce an intermediate destination and configure a "messaging bridge" to forward messages between them. When messaging needs to be pause, administratively stop the bridge.
          Tom

The fan stops after the Satellite U500 - 10Jwas turn on

Similar Messages

Maybe you are looking for