The fastest data transfer device is ?......
i want an update of my personal knowledge
what is today the fastest way to transfer data, audio etc from your harddisk to your external disk ? firewire 800 ?? usb 2 ?....
ty for your help.
Read my post again.
I said _"from fastest to slowest"_ and eSATA is first in the list.
_Rated speeds_
• SATA 3.0 aka SATA-II – 3.0 Gbps
• SATA 1.5 aka SATA-I – 1.5 Gbps
• FireWire 800 – 800 Mbps
• FireWire 400 – 400 Mbps
• USB 2.0 – 480 Mbps - however in real life it is slower than FW400 due to technical limitations
• USB 1.1 – 15 Mbps
Similar Messages
-
How to find the max data transfer rate(disk speed) supported by mobo?
I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section. -
Secure the file/data transfer between XI and any third-party system
Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
VenkatHi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat -
CJR2-The plan data transfer is locked
Hi,
I am planning costs by CJR2 on a WBS element for a certain period and version by cost element.When I execute CJR2,it allows me to enter the values against periods but when I try to save ,system gives error message-The plan data transfer is locked for fiscal year 2009 and version F06 in controlling area 1000.
I have checked in OKP1 and also in CO versions,this version is not locked for any transactions and Fiscal year 2009.Has anyone come accross similar situation and how was it resolved.
Its matter of urgency,any help will be highly appreciated.
Regards,
MTHHi Ravi,
Thanks for your answer.I have checked the statuses and there are no status hampering the Plan primary cost or Periodic reposting Plan data.I guess its more related to the version used.Any other thoughts?Anyone.....
Regards,
MTH -
SRM MDM: Workflow Unlaunch while performing the Automatic data transfer
Hi,
We are trying to import some data from R/3 4.6 C by configuraing remote system as ERP and creating Port based based on the XML Schema in the SRM MDM Catalog. We have created work flow to validate the above pulled data accuracy into data manager. Everything goes well here, I am able to get the data transfered into data manager Automatically But the only issue is in the Work flow.
Set workflow into data manager is not able to launch automatically even though the record is accurate via automatic transfer. I have accuratly set the wokflow name in import manager while svaing the MAP file for automatic import.
Please have your inputs why the work flow is not able to launch in automatic data transfer from the specified port.
Thanks/PawanHi Pawan,
please check in the Data Manager, that you selected by the workflow, the right Trigger Actions, such as Record Import. And that the Autolunch is also set correcly.
Regards,
Tamá -
ALV Control: Permitted Values for STYLE in the ALV Data Transfer structure
Does anyone know a source / reference that "de-codes" the integer value of the the field style in the structure LVC_S_DATA to something a human understands.
Doh!! It is the binary values that are important.
Edited by: Andrew Barnard on Sep 2, 2008 3:00 PM.It is the binary values that are important.
add 32 to turn bolding on
add 512 to turn underline on
add 2048 to get left-justified
and so on.. -
How can I check the data transfer rate of my FW800 port
I have an iMac 2.4 20 inch (MB323LL/A) with a Lacie external rugged hard drive (320 GB). I have attached it using my FW800 port with the cable supplied with the drive.
It seems slow to me so I was wondering if there is any way to see what the current data transfer is for a backup in progress. Of course it should be 800Mbps but is it really moving at that speed ? How can I tell what speed it is transferring at ? Can I use the same method for USB ports too ?When you move a large file, you are more likely to see a sustained transfer rate than a small file. Small files have to be individually read/write back and forth, thus slows the actual transfer rate down. If you are moving any file up to 4 GB and probably over 1 MB you'll see more realistic transfer rates. Furthermore your hard drive access time, and RPM figures into the equation too, as well as how much RAM you have. 800Mbps works out to 100 Megabytes per second under ideal conditions.
-
Is data transfer included in the 90-day tech support which comes with a new MacBook Air?
I would think so. A friend is buying a new MacBook Air, and needs to know if data transfer is included in the 90-day technical support offer from Apple. I'm pretty sure it is, but just would like to make sure I'm steering her in the right direction.
Thanks.Instructions yes, performing the actual data transfer, not likely. Here are a couple of links that may be useful:
http://pondini.org/OSX/Setup.html
http://support.apple.com/kb/HT5872
Ciao. -
Disk data transfer rate - iMac 2013
Good morning Apple fellows
First of all, sorry for my troubled English speaking, I'll do my best to explain the issue I'm having in the best way possible.
Yesterday I finally received my new iMac (I'm a proud Apple user since 2006), the machine has these specifications: 16 GB Ram, i7 processor, nVidia GT 780M, and a SSD drive of 1TB of capacity.
Under Mavericks everything runs smooth and fine, no issues at all, just perfect, the fastest machine I've ever had. Unfortunately, I had to install Windows 7 via Bootcamp (I'm a mechanical engineer and I use Autodesk Inventor to do my stuff).
After completing the installation of the Microsoft OS, I instantly noticed some laggy performance while running Windows: I installed as asked all the Bootcamp drivers with the USB pendrive that I prepared, but both the startup of the system and the normal use were a bit slow, even slower than my old '09 iMac.
In order to understand what the problem was, I ran the system performance test included in Windows: all the ratings I have are maxed out at 7.9 (7.9 is the top I think), in exception of the "Disk Data Transfer Rate", that is 5.9. As far as I remember, this value is typical for a mechanical disk drive, not for an SSD drive supported with PCIe connections.
Does anybody here got a similar issue? Is there any driver package that I have to install in addition to the Bootcamp drivers?
Thanks in advanceThat is because the WEI uses your boot disk as the default device to measure performance, and, for instance, a Velociraptor 10 K disk, does not score more than 5.9. The story changes when the test is run on other disks, like my array:
However, this measurement is totally worthless in real life. You should look at practical benchmarks like PPBM5 Benchmark -
N95 8Gb USB Data Transfer Mode not working
I have a bizarre problem with USB Data transfer.
a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
c) Later in the day, connected PC #2 and did the same with the last few applications.
d) Next day tried to connect PC #1 and it didn't work
e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
f) Went to PC #2 and tried - Data transfer mode works - no problem.
g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
h) I have tried it on PC #3 and this works as well - no problem.
1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
All PC's are XP SP2.
Any suggestions on anything else to try ?
RegardsSOLVED by:
- attaching N95, selecting USB Data Transfer Mode
- Going to Device Manager
- Selecting the USB Mass Storage Device for N95
- "Uninstall"
- Remove cable when N95 says its safe to
- Re-attach cable
The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
No idea what messed it up in the first place though. -
I'll be purchasing the new Mini and had 2 questions. 1- is the file/data transfer migration program a good one? I have lots of info I need transfered and I am concerned everything will be moved correctly. 2- The firewire port on the new Mini is 800. After I purchase an adaptor - 800 to 400 - I have a bunch of external HDs (all self-powered) - is it okay to simply daisy-chain them or should I purchase a firewire hub?
Thank you.
Rich Greenhub or daisy-chain
I would always tend to recommend a hub in this situation if it is viable, since this eliminates potential FW conflicts, and can resolve odd issues which daisy chains can cause. However, there is nothing wrong with experimenting - if you have the FW devices, I'd try the daisy chain first since it doesn't cost anything. If there are any signs of issues (devices not accessible or 'dropping out' of the chain, then you know to get a hub and try again. -
How to increase AFP data transfer speed?
When I connect to our server from a WAN source outside of our facility the file data transfer rate is extremely slow. We just upgraded to a 10Mps fiber service and that has dematically increased our website data tranfer speed. I would like to find a way to access the file server from remote location and work, but the data transfer rate makes productivity impossible. I would appreciate hearing how other organizations are set-up and functioning with file transfer sizes at an average of 10 to 15 Mb.
Thanks,
Brian
OS10.6.8 Server,If you don't have enough network bandwidth for your time requirements, you have little chance of success with the direct approach. Techniques such as file compression and such can only provide limited help. If you're transfering multiple copies of the files, then you can push one copy of the file to a hosted provider, and then serve additional copies from there.
As for your network, a ten million bits per second network connection is the speed of first-generation Ethernet. That Ethernet was a fast network, back in 1985. In the era of a one billion bits per second Gigabit Ethernet and increasingly commonly with the ten gigabit Ethernet links, a 10 Mb link is glacial.
A typical DSL network is asymmetric, meaning you'll have 10 Mb down (theoretically) and some fraction of that up. So you might not be getting that 10 Mb in the direction you're coppying files. And this is best case; various of the ISP network links around aren't providing their rated speeds.
AFP stinks on a network, and you're also opening up your file system to remote attackers.
As for WebDAV, read this. In addition to WebDAV, you can also try an sftp or other "simpler" copy command as a test, and see what you get for that. (sftp is also encrypted, which has benefits, though the encryption also requires more processing time.)
But beyond techniques such as data compression (and which may or may not be an option here) or incremental or "delta" changes to the data (which probably isn't an option here) or working locally and batching over the changes, there are few good ways to contend with a too-slow-for-your-needs link. -
Hai gurus,
I am new to Abap field.
Kindly confirm whether i had to use LSMW or BDC for the following data transfer.
Production and Planning:
1) Bill of material creation-
2) Recipe creation-
3) Resource creation-
Quality Control.
1) Quality plan
2) Quality sampling procedure.
3) Quality info record.
4) Master Inspection Characteristics.
5) List of material with inspection status
6) Inspection Method.
7) Sampling plan
waiting for the positive reply.
Regards,
scHi Sekar,
If you have huge number of records & the process is onetime process, you can go for LSMW, no ABAP knowledge is required for this.
Hope this helps.
Rdgs,
Sripal -
Difference in data transfer rates between winXP and Linux server?
Hello all,
I am using a winXP laptop to act as my server (all usb external hard drives are connected to it) but the data transfer rates can be really slow. Is Linux faster in that regard? Can a Linux based server provide faster data transfer rates?
Thanks for any help.
Bmora96Linux cannot make hardware go any faster - so if WinXP and its drivers are making optimal use of those USB drives and the USB data transfer pipe, Linux will not make it faster. (but installing Linux and going Tux are always excellent ideas that need no real reason either ;-) )
Real question you should be asking is if using a notebook in a server role is wise thing to do? -
Data Transfer Process and Delete Overlapping Requests
Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
ScottHi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks
Maybe you are looking for
-
I upgraded my 2008 MBPro from 10.5.11 to 10.6.8 Snow Leopard, now iMovie crashes every time I try to insert a title into a sequence. Anyone else having issues?
-
Hi, I am trying to define new data server in topology manager in order to upload excel file, and when i test the connection i got this error:The specified DSN contains an architecture mismatch between the Driver and Application. I did all the steps r
-
I am Leo and I am 6 years old. Me and Mommy went to the Apple Store in King Of Prussia Mall for 2 Hours. And I put an Apple Thunderbolt Display/Apple Cinema Display in Disk Mode. How do you get an Apple Thunderbolt Display/Apple Cinema Display out of
-
Tomcat error: "method not found"
I'm starting a new thread because the issue is method not found. So kindly bear with me. I'm using Tomcat 5 with Javac 1.4.2. I have created a test class called hellothere. The idea is to call a method from JSP. package helloworld; import java.lang.*
-
How can I copy my SMS from old 6600 on my new N70 into the phone memory?? With one PC Suite version I can't do this because it is not compatible with both models. I try it to copy into MMC and use it on N70 and it's working, but not to move into phon