The Fibre Channel Platform Registration Service could not register the platform with fabric

Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
Each 15 minutes, eventlog register a warning.
EventID: 2 Source:2
The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
I have teste the service. And it's started. Cluster storage validation report without failure.
Someone suggest any idea.
Thanks.

Hi,
What’s the OS version of your cluster node?
The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
through one or more high-efficiency data paths. This service is used in support of storage area networks.
This service is installed by default on Windows Server 2008, and the service startup type is Manual.
You may try hotfix in KB 978790, and check the result.
For more information please refer to following MS articles:
The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/978790
cluster resources unresponsive
http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Similar Messages

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

When I try to install Connection Broker on a Windows 2012 R2 Server in a Windows 2003 domain I get this error:
The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
Pooled virtual desktop collection name: NULL
Error: Logon to the database failed.
I have added both the Connection Broker server and the 2 remote desktop servers (also Windows 2012 R2 Servers) to the "Windows Authorization Access Group" in the domain according to this: http://support.microsoft.com/kb/331951
But it still does not work :-(
I keep getting same error....
Any idea what I might be missing ?

Hi,
Thank you for posting in Windows Server Forum.
Firstly please let us know by which method you have setup RDS role. You can have more advantage and feature when you will install with Standard deployment instead of Quick start deployment. So if you have setup with quick start option then you can try installing
with standard type and check the result.
In addition, please check SQL server database is properly configured for RDS server. Also check that domain controller properly communicates. Kindly go through below thread for more information.
Server 2012 RDS - Remote
Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL
Hope it helps!
Thanks.
Dharmesh Solanki

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

I have the following error message: Time Machine could not complete the backup. The backup disk image "/Volumes/Data-1/test's MacBook.sparsebundle" is already in use

time machine has been running smoothly for years- until now. i changed the name of the computer, and now i get the error message. any ideas? d

I have had more than 1 customer with this error recently. I believe the fix is to unplug the TIme Capsule (I was told you should leave it unplugged about 20 minutes, but can't tell you why that amount of time) then plug the Time Capsule back in and your problem should be solved.
Steve

EM console - Could not start the OracelDBConsoleSID service

Oracle 10g, Windows Server 2003
I have problem with EM console. When I restart machine OracleDBConsoleSID is stopped.
When I try to start this service:
Could not start the OracelDBConsoleSID service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
And then this service has status: Staring. EM then work for short time but then again service is stopped.
The Database works without any problems.
Please help!
Thanks in advance

When I try to start the service with CMD:
c:\oracle\product\10.2.0\db_1\BIN>net start OracleDBConsoleSID
The OracleDBConsoleSID service is starting.........................................................................
The OracleDBConsoleSID service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
+++++++++++++++++++++++++++++
In Events - Aplication:
Type: Error
Category: Disk
Event_ID: 6
Description:
An error occured while trying to initialize the service
++++++++++++++++++++++++++++++
======================================
In EM log files…
In OracleDBConsoleSIDsrvc.log
-------------- [OracleDBConsoleSID] ------------
EMDROOT=c:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\...._SID
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
02/25/10 14:15:45 Job Process API is available
02/25/10 14:15:45 Start pending...
02/25/10 14:15:45 Verifying dbconsole is not started already. Command line "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
02/25/10 14:15:56 dbconsole launch commandline is "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
02/25/10 14:15:56 Tracking process launch...
02/25/10 14:16:31 Received exitCode 1 from emctl istatus
02/25/10 14:16:40 Received exitCode 1 from emctl istatus
02/25/10 14:26:24 Received exitCode 1 from emctl istatus
02/25/10 14:26:32 Received exitCode 1 from emctl istatus
02/25/10 14:26:37 Timedout while tracking process to start. Terminating..
In emdctl.trc
2010-02-25 14:26:16 Thread-3200 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:24 Thread-320 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:24 Thread-320 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:32 Thread-2832 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:32 Thread-2832 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:36 Thread-3048 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:36 Thread-3048 ERROR http: 1736: Unable to initialize ssl connection with server, aborting connection attempt
In emagent.trc
2010-02-25 14:26:11 Thread-2240 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:11 Thread-2240 ERROR http: 1152: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:11 Thread-2240 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://...:5501/em/upload/: retStatus=-1
2010-02-25 14:26:20 Thread-2508 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:20 Thread-2508 ERROR http: 1148: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:20 Thread-2508 ERROR command: nmejcn: failed http connection to https://...:5501/em/upload/: retStatus=-1
Edited by: user9106065 on Feb 25, 2010 8:53 AM

Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1

I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
i spent 4 hrs on web for solution but no luck.
the following is the error
Services
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
OK
---------------------------

Please run AutoConfig and make sure it completes successfully and try then.
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
Thanks,
Hussein

SFC problem - "Windows Resource Protection could not start the repair service"

We are trying to attempt to fix a Windows 2008 start up problem. We boot the machine from a Windows 2008 CD and go to the repair tool - command prompt.
When we do the command sfc /scannow, we are getting
"Windows Resource Protection could not start the repair service"
We did some researches there someone suggested the trustedinstaller is not running so we tried to do a net start trustedinstaller.
But We are getting
"The windows modulers instaler service is starting
The windows modulers instaler service is starting could not be started
A system error has occured
System error 1067 has occured
The process terminated unexpectedly. "
Anyone can give us an idea to see why we can not run the sfc the first place. Thanks

SYMPTOMS:
All attempts to run command:
sfc /SCANNOW
keep returning the following message:
"Windows Resource Protection could not start the repair service"
SOLUTION:
If you are using any kind of boot image/disk to boot up, you will have to use the "offline" switches (OFFBOOTDIR & OFFWINDIR) along with the SFC /SCANNOW command in order to start repairing your instalation properly.
please remember to tripple-check for corret partition letters, because this is a crucial parameter for SFC to start working properly.
also make sure to confirm whether so called "recovery" partion exists in your specific scenario or not. If so, in most cases this will render the "recovery" partition being the one to be set as a boot partition (OFFBOOTDIR) within sfc command, while Windows
system folder (OFFWINDIR) will actually reside on a different partition.
My scenario is described exactly above and therefore in my case boot partition letter was C: and system partition was D: ...As of that - the proper command line to run SFC successfuly was:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Successful scan for integrity of all protected system files and replacement of incorrect versions with correct Microsoft versions then looks like this:
X:\sources>sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\WindowsBeginning system scan. This process will take some time.Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.logwindir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Once SFC scan completed, I have run the Startup Repair from the repair dialogue menu prior rebooting the system. Remember to click "Cancel" on the prompt for using the System restore in this step. I am assuming you have tried this already time ago and confrmed
it did not resolve the problem, but most importantly - you really would not want to overwrite the files, which you have just repaired with any possibly corrupted ones ;)
After this I've unplugged bootable USB key with the My Windows Vista Enterprise 64bit setup disk image and restarted computer. System booted up properly on first attempt. No issues have been identified as a result of my post boot checks. This completely
resolved the issue in my case. Should you have questions, please let me know.
Pavel

Error : Could not start the SSO service. Please check the configuration

Hi,
I am getting the above error when enabling the"Agent-Based Windows Single Sign-On with Active Directory (Kerberos0".
I already twice did the KTpass.Timing is perfect bet CAS and AD.Please look into this CAS LOG file and advice me the next step to solve this issue.
Thanks
swami

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

XMII WebService shows error as - SOAP Service could not be loaded: null

Dear Friends,
   I'm doing the xMII <-> XI <-> RFC scenario with the reference of the blog: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8703. [original link is broken] [original link is broken] [original link is broken] I just create an asyncronous scenario. Sender with SOAP adapter and receiver with RFC adapter. After creating the WSDL file from the scenario, I stored it in the xMII server path D:XISendere10099xMII_integration_1_Outbound_MI.wsdl. Then in the WebService action block of xMII BLT, I gave the URL as this file path, user name and password of XI server and click Next. Then I got the error message as SOAP Service could not be loaded: null.
   Please give the solution for this issue.
Regards,
Jagan.

Dear Selvam,
   Actually I checked those things already. Everything is fine. I executed already HTTP <-> XI <-> xMII scenario and it was working fine. I checked with SendSMS.wsdl file now. That is also working fine. I am attaching the WSDL file, which I am using, for reference. This file is working fine in SOAPSonar and data posted in SAP R/3 table. But it is showing the error in xMII as "SOAP Service could not be loaded: null".
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="xMII_integration_1_Outbound_MI" targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:p1="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><wsdl:types><xsd:schema targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:element name="xMII_integration_1_Outbound_MT" type="xMII_Integration_1_Out_DT" /><xsd:complexType name="xMII_Integration_1_Out_DT"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">750324e0438311ddad100019bb528b1e</xsd:appinfo></xsd:annotation><xsd:sequence><xsd:element name="Vendor" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d01b6611dd8de7001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Name" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d11b6611dd8b8e001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Street" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d21b6611ddcc29001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="City" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d31b6611dd8303001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Dist" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d41b6611ddcd00001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Country" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d51b6611dd9fa5001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element></xsd:sequence></xsd:complexType></xsd:schema></wsdl:types><wsdl:message name="xMII_integration_1_Outbound_MT"><wsdl:part name="xMII_integration_1_Outbound_MT" element="p1:xMII_integration_1_Outbound_MT" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /></wsdl:message><wsdl:portType name="xMII_integration_1_Outbound_MI"><wsdl:operation name="xMII_integration_1_Outbound_MI"><wsdl:input message="p1:xMII_integration_1_Outbound_MT" /></wsdl:operation></wsdl:portType><wsdl:binding name="xMII_integration_1_Outbound_MIBinding" type="p1:xMII_integration_1_Outbound_MI" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:operation name="xMII_integration_1_Outbound_MI"><soap:operation soapAction="http://sap.com/xi/WebService/soap1.1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:input><soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:input></wsdl:operation></wsdl:binding><wsdl:service name="xMII_integration_1_Outbound_MIService"><wsdl:port name="xMII_integration_1_Outbound_MIPort" binding="p1:xMII_integration_1_Outbound_MIBinding" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:address location="http://aprins07:8010/XISOAPAdapter/MessageServlet?channel=:A_Test:xMII_Integration_1_xMII_Sender_CC&version=3.0&Sender.Service=A_Test&Interface=http%3A%2F%2Fwww.xxx.com%2FXIBatch3%2F10099%2FxMII_Integration_1%5ExMII_integration_1_Outbound_MI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:port></wsdl:service></wsdl:definitions>
Regards,
Jagan.

JCO.SERVER could not find the server function

Hi,
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
Please clarify.
Thanks,
Srinivasa

Thanks for the reply,
Yes RFC is in the Sender side.
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST(XI system name)
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST(XI system name)
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
These is what I gave,

Error: Sorry! We could not complete the transaction using this payment method. Please contact support.

I am everytime getting the following error
Sorry! We could not complete the transaction using this payment method. Please contact support.
I have put my 2 credit card information with Microsoft. I tried calling 2 times the customer support but it was a pathetic response. In a single call I talked to 4 customer support officers and everybody passed on the call to the next without resolving the
problem, and without telling the next officer what is my issue!! they just passed on the phone call to avoid me!!
It is really frustrating that neither Microsoft is provide a good support (it was hard for them to understand my issue, in fact one of the support guy did not even know spelling of Azure.. he/she was saying it assure!!! and One of the guy told me that I
cannot use credit card outside US and Canada. then why you call yourself global???
So Microsoft you have a few things to do as your homework.
1. Your support is pathetic, frustrating and requires better people out there who know about your products, so train them first!
2. You got my 2 credit cards information which I see at subscriptions for Windows Azure, please remove both of them if you cannot provide a good support and subscription.
3. Learn from other cloud providers, AWS will otherwise kill your business.
Regards
Kajal
Kajal Sinha

Hi Kajal,
Sincerely apologize for this inconvenience, for billing & account issue, usually we need to contact the support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/. Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create
a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0).
If above support channels don't work, at your convenient, could you please send an email to me: dxu at microsoft.com with kindly providing your:
Name
Email address
Phone number
We will provide help via emails. Thank you.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Apple Mobile Device service could not be started. (-2146959337)

I keep getting the error "Apple Mobile Device service could not be started because an unknown error occurred (-2146959337). After I hit OK, it says "This iPod cannot be used because the Apple Mobile Device is not started." I have tried starting the service by going into Services, but it just tells me "Error 5: Access is denied." I have reinstalled iTunes, Quicktime, and Apple Mobile Device service multiple times, but I still get the same error. I had an iPod nano that worked fine, but now that I got an iPod touch, it gives me this issue every time I connect it.

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

Windows setup could not read the XP CD

Um little help here asap please?
I ran Bootcamp and partitioned the drive, then I put my XP CD in and started the setup. But before I got to set it up, on the blue screen it says:
"Setup could not read the CD you inserted, or the CD is not a valid Windows CD"
Then it gives me a bunch of possible Windows CDs to insert.
Well I know this is the right CD with Service Pack 2 because I've used it before on my desktop PC.
Now if I exit the setup and try to restart my Mac it goes straight to the setup again and fails to do it again.
What am i doing wrong here? Is it possible this is because I have used the Windows CD on 3 different computers (which is all I'm allowed to install it on)? But then, wouldn't I be told this when I try to type the product key? I haven't gotten to start the installation yet... :/
Someone help please?

But I've followed the howto exactly as it is set out. And it's the academic edition of Windows XP Professional with Service Pack 2.
I don't even get as far as the formatting again stage. I get as far as Point #5 of Step 2 which says "Your computer starts up from the Windows installation disc. Follow the onscreen instructions." which I do... When the computer boots from the Windows Disk it does the blue screen stuff and loads a bunch of comp tech at the bottom of the screen. Then I'm presented with a screen that says "Windows XP Professional Setup. Welcome to Setup. This portion of the Setup program prepares Microsoft<R> Windows<R> XP to run on your computer. To setup Windows XP now, press ENTER"
I do that. Then it loads and gives me the Licensing Agreement which I agree to. Then it says Setup cannot find a previous version of Windows installed on this computer and it needs to verify that I'm allowed to use this upgrade product. Please insert one of "bla bla bla". Of course the Windows installation disc is in there so I press Enter like it says to and then...
Setup cannot read the CD you inserted, or the CD is not a valid Windows CD...
I don't actually GET to the stage you mention.
Could this be because this Windows Installation disc has been used on all of the computers it is allowed to be used on?
Sigh.

The Fibre Channel Platform Registration Service could not register the platform with fabric

Similar Messages

Maybe you are looking for