"the file header checksum does not match the computer checksum." Pavilion P6000

HP Pavilion P6000
Windows 7 64-bit
The file is possible corrupt. The file header checksum does not match the computer checksum
I was previously getting blue screens saying things like "Memory_Management"

I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
Please report results.
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

Similar Messages

File sizes listed does not match the downloaded files

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

The file may be corrupt. The file header checksum does not match the computed checksum.

I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

Hi ballen6721,
Thank you for the post.
This issue can occur if the newly installed hardware device is incompatible with the system.
Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
Method 1 Device Clean Boot
============================================
Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.
Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
6. At the System Recovery Options Dialog Box, click on System Restore.
7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
8. Click Finish to restore the system.
Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
Can we start the computer now?
If the issue persists, please help confirm the following points:
1. What hardware changes have you made recently?
2. Can we enter Safe Mode now?
I look forward to hearing from you.
Best regards,
Tim Quan
Microsoft Online Community Support

The affinity mask specified does not match the CPU mask on this system.

We are having a problem with one of our SQL servers, and in comparing it to the backup server which is working fine, I noticed some differences. I attempted to correct the differences, but no luck.
The dell server has 4 dual-core processors and at one point hyper-threading was enabled. One of our DBAs recommended that it be turned off. We didn't have any major problems until recently and it seems that getting this setting right is the lynchpin. Any suggestions?
John
EXEC sys.sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'affinity mask', N'0'
GO
EXEC sys.sp_configure N'affinity I/O mask', N'0'
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
GO
Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'affinity mask' does not exist, or it may be an advanced option.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'affinity I/O mask' does not exist, or it may be an advanced option.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.
Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

The https URL hostname does not match the Common Name (CN) on the server.

Hi,
I am getting the following error while trying to use https with our self-signed certificates.
javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
The above error is the error I get, when I try to use the Web Services using https.
I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
<http-conf:conduit name="*.http-conduit">

<http-conf:tlsClientParameters disableCNCheck="true" />
Kindly let me know on what would be the issue here?.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

The version of SOS does not match the version of CLR you are debugging.

I have a 32 bit crash dump file that I have loaded with WinDbg X86 (I'm running on Win7 63 bit).
When I open the crash dump file I do the following:
.loadby sos clr
then when I try to run any other command I get the following error:
The version of SOS does not match the version of CLR you are debugging. Please
load the matching version of SOS for the version of CLR you are debugging.
CLR Version: 4.0.30319.269
SOS Version: 4.0.30319.296
How do I load another version of the SOS dll? and
How do I find out what version of SOS I need to load?
Thanks

I see that there is another version of sos.dll located in:
C:\Windows\Microsoft.NET\Framework\v2.0.50727.
So I have tried to add this path in File-->Symbol File Path like so:
srv*c:\symcache*http://msdl.microsoft.com/download/symbols;C:\Windows\Microsoft.NET\Framework\v2.0.50727
It doesnt seem to make any difference.
When I type !chain I dont see this path output.

"The class being compiled does not match the class that was imported"

----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.view.*;
var calDrawer:CalendarView = new CalendarView(); //Listener /
view
----------sixSpices/com/sixspices/updater/view/CalendarView.as
file----------
class CalendarView {
public function CalendarView(){
public function onRecieveData(listOfEvents:Array) {
displayEvents(listOfEvents);
public function displayEvents(listOfEvents:Array):Void {
trace(listOfEvents);
When I test the movie (updateSite.swf) in flash, it gives me
the error:
The class being compiled, 'CalendarView', does not match the
class that was imported,
'com.sixspices.updater.view.CalendarView'.

Here is my file structure:
sixSpices
-->updateSite
-->-->updateSite.fla
-->-->updateSite.swf
-->com
-->-->sixSpices
-->-->-->updater
-->-->-->-->view
-->-->-->-->-->Calendar.as
If I move updateSite.fla to the folder sixSpices so that
"com" is in the same folder as it, I get the same error.
The following works with no problems (no similar error):
----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.model.*;
var calModel:CalendarOverview = new CalendarOverview();
//Broadcaster / model
----------sixSpices/com/sixspices/updater/model/CalendarOverview.as
file----------
import com.sixspices.updater.model.*;
import mx.utils.Delegate;
import mx.events.EventDispatcher;
class CalendarOverview {
public function CalendarOverview(){
}

Paper Size Error: The paper size selected in the printer driver software does not match the paper

HPofficejet 7500 E910
This question was solved.
View Solution.

I see this question several times, and one response asking the person to have patience.. however that was in February - it is now April, and i am not able to locate an actual answer to this question. My printer is also giving me this error (Officejet Pro 8000 -A809w), even though is it very obviously not true. I have unplugged and replugged and restarted, etc. I am trying to print on a regular landscape oriented 8.5x11 sheet of paper. The last thing i printed was a single envelope (also appropriately chosen in page setup), with the paper guides narrowed.. the envelope printed and i moved the guides back to the normal position and replaced the letter sized paper. Now the printer tells me that's not what i've done.
Running Mac OSX Lion 10.7.3 - it worked fine all day til now. It's done this a time or two previously, but unplugging the printer has solved it - not this time.
Help!

"The file is possibly corrupt. The file header checksum does not match the computed checksum."

Yesterday evening, I accidentally dropped my Probook 6565b. It bluescreened with strange red boxes around the text, so I thought the screen or something was damaged. I emergency shut down the computer, and started it up again. It was visibly slower, but I was able to use it, so, relieved, I turned it off again and went to bed.
This morning, I tried to turn it on again. It started out normally (and I am able to access the start up screen) . But afterwards, it gives me a blank dark blue screen (like before you see the Windows logo) and it stays there for around 15 seconds before it gives me the error.
I have no idea what to do, so any advice would be greatly appreciated!
I think my operating system is Windows 7, but I'm not sure.
Thank you.

I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
Please report results.
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

The declared package does not match the expected package

I was given some Java code that I need to get working and then make some improvements on, but I'm still in the process of learning Java and the IDE Eclipse as well. There is a package called MyGUI and most of the files in that package had the error "The declared package MyGui does not match the expected package MyGUI" as a result of the inconsistent case, so I changed all of the first lines "package MyGui" to "package MyGUI" and this fixed all of those problems except for one.
There is still one file where it gives this error message even though I changed the code the same way I did for the other files. I can't figure why this file is different. I saved it and I also refreshed everything, but it still gives me the error message "The declared package MyGui does not match the expected package MyGUI" although the package is clearly declared as "MyGUI".
Does anyone have an idea of why this would be? I am very new to Eclipse and Java, so I don't really know how to go about solving errors yet.

Forget the IDE until you get a handle on basic concepts like packages and classpath.
The error you're talking about comes when a .java or .class file is not in a directory that matches its declared package.
Let's say that CLASSPATH_ROOT is the only element in your classpath. If you have a class that is declared like so:
package com.foo;
class Bar {}Then, you must have CLASSPATH_ROOT/com/foo/Bar.java or CLASSPATH_ROOT/com/foo/Bar.class.
The language rules for .java files are not as strict as those for .class files, but some compilers may expect them to be the same, and it's a good idea to do so even if it's not strictly necessary, for clarity's sake.
Also, even though Windows' file system is not case sensitive--that is it considers FOO.class and foo.class the same file name--Java is. You probably can't directly rename FOO.java to Foo.java in Windows, as it will say it's the same name, so if you need to change the case, rename it to a different name, than back to Foo with the correct case.
Edited by: jverd on Mar 29, 2009 12:07 PM

CUPC - CTL does not match the configured TFTP servers -- need reset!

Hi,
i have trouble with CUPC 8. Presence 8.0.4. I tested all things, but i'm unable find solution.
Client say: Phone initialization has occured. CTL reset required.[1002]. In the core log from the CUPC is:
provider-runner] [ConfigService] [CUCMConfigSubService.updateCTL(633)] - CTL does not match the configured TFTP servers -- need reset!
but i don't know which CTL, and why CUPC use CTL for accessing tftp. I'm not using secure connection to the CCM.
Solution from release notes:
http://www.cisco.com/en/US/docs/voice_ip_comm/cupc/8_0/english/release/notes/cupc80.html#wp248810 is not working.
Has anybody some idea?
Risa

Some details for my trouble. Integration from CUPS and CCM from system troubleshooter is ok.
CCM has device type CUSF. But CUPC is not able connect to this softphone. CUPC client show error message from my first post. And in the core log from the CUPC are messages about softphone and downloading configuration file, but tftp connection failed. Log contain messages: Supplied TFTP address 192.168.10.3 is not in the CTL. // CTL does not match the configured TFTP servers -- need reset!
(same situation with hostname of CCM)
From release notes and description of this situation I tried erase old configuration from PC, but nothing change - same trouble.
Has anybody some idea, which CTL is used for authenticate tftp.
Thanks for response.
Richard

Unique Identifier of the source style does not match the target st

I'm running into a bunch of problems with an export/import, but I'll limit myself to the more opaque ones for the moment. We've got a page group in place and are trying to overwrite it, or at least parts of it, with a revised version. The export appears to succeed, but the pre-check (and consequently, it appears, the entire import) fails. One of the few specific errors has to do with a style:
[ERROR] id = NULL context = style_pre_check user = PORTAL The Unique Identifier of the source style MY_STYLE does not match the target style MY_STYLE.
The style in question exists in both our development environment (from which we're exporting) and our target environment (into which we're importing, of course). It hasn't even been changed in the development environment, so it's identical to what it's replacing. Does anybody know what's going on here and how it might be fixed?

This indicates the style in the production did not come from the same development system as the one you're attempting the new import from. Also, this could happen, if for some reason you had deleted the style in the development after it was deployed to production and (re-) created a new style with the same name.
In order for pre-check to succeed, you would need to either rename the style on the production or rename it on development and re-export and import the transport set again.

SCOM/ SCVMM Integration - MonitoringObjectId in alert does not match the virtual machine GUID in SCVMM

I am importing alerts into a 3rd party application from SCOM 2012 R2 using the powershell code below. SCOM returns me MonitoringAlert objects, I need to map the alerts to the virtual machines in SCVMM. However, the MonitoringAlert.MonitoringObjectId value
does not match the ID (guid) of the virtual machines in SCVMM 2012 R2. Surely these IDs should correlate, any ideas anyone?
$mg = Get-SCOMManagementGroup -ComputerName "SCOMGR.manageiq.com"
$criteria = New-Object Microsoft.EnterpriseManagement.Monitoring.MonitoringAlertCriteria("Description LIKE '%Heartbeat%' AND ResolutionState == 0")
$alerts = $mg.OperationalData.GetMonitoringAlerts($criteria, (Get-Date).AddDays(-10))
many thanks in advance
B

Hi,
You could use this command get the MonitoringObjectId.
Get-SCOMalert | Select name,
MonitoringObjectId
For more information, please review the link below:
Get-SCOMAlert Cmdlet, the Criteria Parameter and the Non-Equal Operator
http://blogs.technet.com/b/stefan_stranger/archive/2012/11/02/get-scomalert-cmdlet-the-criteria-parameter-and-the-non-equal-operator.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Comcast will not accept my spot because the audio sampling value of 44100 does not match the expected rate of 48000. Any ideas how to fix?

I am working with Final Cut Pro 10.1.4. I created a 30 second spot with a music bed. Comcast is rejecting the spot because the audio sampling rate does not match the actual audio values in the spot. They expected 48000 and my spot is 44100. This may be caused because I was forced to change the speed of the audio to work properly in the spot. The audio was sped up to 101%. First, is this what caused Comcast to reject and second, is there a way to restore the rate without slowing down the music bed?
Thanks!

FFirst check your project properties. The default is 48K.

"the file header checksum does not match the computer checksum." Pavilion P6000

Similar Messages

Maybe you are looking for