The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please
the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please
Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2
Similar Messages
-
Could not complete your request because the file is not compatible with this version of photoshop
Hello,
I'm a beginner in PS. I was edit TIFF file in PS. Size of file is 21x89.1(22.6 MB). Then suddenly power - cuted. But after 5 min turn on PC and PS can't open my TIFF file.
Error is (could not complete your request because the file is not compatible with this version of photoshop)
What should I do, how I open this TIFF file? I realy need to open this file?
Please help me...
Regards, Suvd.SOut of curiosity, were you actually saving the file at the moment the power cut off, or had you just saved it?
If not, I don't understand the reason the file should have become corrupted. If it was successfully saved on disk from the prior save operation, just shutting off the power on Photoshop would lose your current edits, but the file should still be intact.
-Noel -
Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost. -
Help needed, encountered this error while opening psd file.
the psd file is created in CS5, tried to open it in CS3 because it said "...the file is not compatible with this version of Photoshop", i got the same error message in CS5
tried to open it at Firework CS6 (got the idea from Re: Recovering Crashed PSD file) but it give me error message "Could not open the file. An internal error occured"
is there any way to recover the file?
it's for my mid-semester score
thank you in advanceHi gener7,
i've uploaded the file and sent you the link
thank you very much for the help. -
Could not complete your request the file is not compatible with this version of Photoshop.
User has been working on a photoshop document for a whole day, when they came to open it the next day the were presented with the error message could not complete your request the file is not compatible with this version of Photoshop.
The file has been saved locally and hard drive and RAM are working as they should. Does anybody else have any idea to the cause of this problem. the file is 582MB in size. Any help would be greatly appreciated.Sounds like it's corrupt.
Have you any backups or other versions?
http://windows.microsoft.com/en-ie/windows/previous-versions-files-faq#1TC=windows-7
OS X Mountain Lion: View and restore past versions of documents
This might help
http://hardcorerikki.deviantart.com/journal/Saving-your-corrupt-PSD-files-and-job-21415717 1 -
I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
more info:
Photoshop never crashed or anything.
I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
The file size was appox. 1giga
Thanks a lotThe problem was saving over the network. Working across a network is not supported.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost. -
hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.
CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
So my friend posted a funny pic in her christmas outfit and I thought it would be fun to turn it into a fake Christmas Movie poster..
Anyways.. My computer crashed.. "It does that sometimes" I re-opened my PSD and it says "Unable to complete request because the file is not compatible with this version of Photoshop"
Anyway to recover ANY of the file?
Here is the file im having trouble with. You can download it here if you are interested in taking a look: http://portalpacific.net/movieposter.psd
Thanks for any help! Happy New years designers!PortalPacific wrote:
…Here is the file im having trouble with. You can download it here if you are interested in taking a look: …http://portalpacific.net/movieposter.psd
I downloaded it and looked at it. Even Graphic Converter can't recover any pixels or meaningful data, just some general information:
In my experience, if GraphicConverter can't open it, nothing will.
Your file is toast Sorry. -
Error message: File is not compatible with this version of Photoshop
When I try and reopen a psd file I have created, I get the message "Could not complete your request because the file is not compatible with this version of Photoshop"
Used to get this on occasional files using CS2, have now started getting it on CS3 files. The only way to get round it is to redo the work!
Am using Photoshop CS3, V.10 on a G5, OSX 10.4.11. Which is connected to a PC network.Ran into the same message on files created by one of our designers. His computer needed a "cleansing" to stop corrupting files. Files were actually being corrupted locally, so it wasn't only a server issue...at least in our case. One thing that we did that "sort of" worked...we transferred the file to a PC and ran a shareware utility that repairs PSDs (Advanced PSD Repair Software). It said it repaired the file successfully, BUT it separated the files into a couple of hundred individual documents. Each layer and layer mask was a separate file. I didn't see any setting to recover as a composed file so I guess this is just how it works. If your file is not heavily layered and complex, I guess this might work for you, but, like I told the designer, I ain't goin' in there and reconstructing your layers. =) I know this doesn't help if you don't have access to a PC with Photoshop loaded in it, but thought this might help some poor soul along the way. Good luck...
-
File is not compatible with this version of Photoshop.
I have seen several other posts with this same issue but have not been able to find/see any resolution. I am trying to open a .psd file and receive the error:
In case the image above does not display "Could not complete your request because the file is not compatible with this version of Photoshop."
Of course, this file is an "Approved Design" for a client and will take days to rebuild. All of the other files I worked on during the same time period are just fine.
I have tried:
Deleting Preferences
Clearing Preferences
Setting to "Ignored EXIF profile tag"
My System Specs:
Intel XEON E345 @ 2.33GHz (Dual)
12.0 GB RAM
64-bit Windows 7
Photoshop is set to use 7780 MB for RAM (71%)
I have 4 disks assigned for scratch disk access and my OS drive is not the primary scratch drive, total of close to 500GB space for scratch.
PLEASE, please, please help!! I hope there is a way to repair/get this file open....Generally speaking, Photoshop is not known to destroy files. The problem, as implied above, is more likely a basic problem with your computer.
You can check your Windows event logs to see if you find disk errors.
-Noel -
File is not compatible with this version of Photoshop error
Computer crashed yesterday and now I am getting "File is not compatible with this version of Photoshop" error and unable to opening in PS CS5 or Fireworks CS5. Any ideas? Also tried the PS repair download and would rather not pay $30 to find out it can't do it. Seems like a common error but in all of the forums I haven't found a solid answer. Appreciate some real advise.
Thanks in advanceThis is the free app that all the PSD repair hacks are based on: Telegraphics - Free plugins for Photoshop & Illustrator...and other software
There are 3 possible reasons for that error: file corruption on disk, more than 8000 layers in the file, or a layer somehow went over 30,000 pixels in a PSD file (which would be legal in PSB, but not in PSD). -
Ive Restarted photoshop Multiple times and it still Doesnt work im on photoshop cs5 and i havent had this problem in a while but again this is a abr file.
If this problem still persists please verify that this brush pack is compatible with photoshop cs5-also it would help alot to know these things: if your photoshop is running on a apple operating system or windows operating system moreover what version of operating system. Some other things that could hinder this brush pack from working are its installed incorrectly or in the wrong place also resetting cs5 preferences can help. Last if what you posted originally is true and or accurate-"-when i try and load this brush pack i bought" it says "Because this file is not compatible with this version of Photoshop" Then it is exactly as it states a Brush Pack that will not WORK with CS5.
-
Photoshop Elements 11
Only Been using it
saying ' could not complete your request because file is not compatible with this version of Photoshop Elements'
What do i doWhich operating system are you running on?
Do you get this error when loading or using the organizer or the editor?
What are you trying to do when you get this error?
If you are using raw files, which camera (make and model) do you use to create the raw files?
If you can load the editor, which version of camera raw do you have loaded? - see Help -> about Plug-in -> Camera raw
Brian -
I'm recieving this error on numerous files of mine (files are all fairly large)
I'm running CS, CS2 and CS3 on my machine and none will open them.
Suggestions?Assuming that each file has its appropriate extension (.psd, .tif, .jpg, etc.), I would say your files are corrupted.
This can happen in one of at least two ways:
1.—attempting to work across a network; or
2.—running NAV (Norton Anti Virus).
If your files are on a server on a network, copy the CLOSED file to your local hard drive through the Finder, then open it, edit it, CLOSE it and finally copy the CLOSED file back to the server. The reason for this is that, if the network administrator makes an error in setting up the network, opening files directly from the server or saving them directly to the server can corrupt the file permanently.
Sometimes Illustrator or Graphic Converter can open the flattened composite of such a corrupted file, but any layers will be toast.
Finally, saving a file that is over 2GB as a PSD rather than a PSB can result in an inability to ever open the file again.
Wo Tai Lao Le
我太老了 -
After several hours creating a PSD file in Photoshop CS5 I attempted to revert some changes and got this error "Could not complete your request because the file is not compatible with this version of Photoshop".
I closed the file and restarted Photoshop and still get this error.
I restarted the computer and still get this error. Now my hours of work are WASTED!
This file was created using Photoshop CS5 Extended and was never in any other software.
Details:
Mac Photoshop CS5 (12.0 running in 32 bit mode)
File had a video layer (h.264)
MaxBook Pro 2.8Ghz
OSX 10.6.3I was able to open the file in Photoshop CS2 and all layers were intact. PS CS2 gave me the message: "A layer is corrupt and will be discarded." Turns out that was the video layer. The file itself was fine and I am again working on it in PS CS5.
Which leads me to ask: If a video layer gets corrupted why can't PS CS5 open it?
PS CS2 had no problem opening the file, it just flatteded the video layer - it even kept the current key frame.
Additional info: Just before the file went bad I made a level adjustment to the video layer and set a keyframe in the animation panel. Then I saved and got the error "Could not complete your request because the file is not compatible with this version of Photosh' in Photoshop Macintosh". Also the source H.264 video file appears to be fine, it's only a 5 second clip and it play fine in every app - even PS CS5.
Maybe you are looking for
-
Hi, umm so anyways my ipod is about 2 years old now and i think the reason why it started to malfunction in the first place was because i had too much stuff on my ipod, apps, movies, and junk. But now i took it to the apple store and they were able t
-
Problem with HP PhotoSmart C4599
I used to have WEP as wifi security, but I just change it to WPA2-PSK [AES], and the printer won't never show up in network whatever I did. I tried to uninstalled everything related to Hp software and reinstall, but its still not there in network con
-
HTTP to ABAP Proxy - Problem with "Current User" parameter
Hi experts, We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy. We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain. The us
-
Any TextFrame Created on Server will not show as tagged on desktop
Hi All, related to an eariler post - if I create "any" text frame on InDesign Server, it will not show as tagged when opened in desktop. I run the following code on InDesign Server CS3: var doc = app.documents.add(); var frame = doc.pages.item(0).tex
-
I am looking to create a page with the same functionality as the 'Item Finder" with in the HTMLDB design tool. It is used on pages like region definitions or any where you need to search for existing items with in your application like on page branch