The file "iTunes Library" could not be opened because it was created ...
Hi, I get this error message when starting iTunes: The file "iTunes Library" could not be opened because it was created by a newer version of iTunes.
I get this message after running a software update when iTunes announces a newer version is available.
I have ver 7.4.2 (4)
Am I doing something wrong? or is there a fix?
Thanks.
The update should've done this for you. But if, for whatever reason, you have an icon in your dock that's launching an old version of iTunes you should do a little investigating. Try this...
- open your Applications folder and see if you have one version of iTunes in there (one icon).
- highlight the icon and "GET INFO" to see what version it is.
- if it's the updated version, replace the icon in your dock with the icon for the newest version
Tossing out or swapping icons in the dock doesn't do any harm. But having an old icon will most definitely launch the old version it was associated with. Like I mentioned though, the update should have done this automatically. I would think back about how you updated just to make sure something else didn't go awry. Losing an iTunes library can be a drag.
Similar Messages
-
I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
ThanksIf you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
When i try to open itunes a hazard warning appears reading"the file itunes library.itl cannot be opened because it was created using a newer version of itunes" so i can't open my itunes on my computer
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
EDIT: My apologies ... it'd be better to start straight in with the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?
this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated. -
after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
My iTunes won't open and I am getting message "the file iTunes library .itl"cannot be read because it was created by a newer version of iTunes. Anyone have a suggestion?
I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
cannot open iTunes. I get the message" the file--iTunes library.itl cannot be read because it was created by a newer version of iTunes. How do I proceed?
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( How do i go back to last install or make this new version works?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Recently I have not been able to open iTunes,I tried removing and reinstalling it but still won't open. I now get the message The file "iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Any suggestions on how to get iTunes to work again ?
Thanks
<Edited by Host>Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Hate iTunes 11. Reverted to the old version. Now I get a msg when I click to open iTunes stating, "The file "iTunes Library.itl" cannot be read because it was created in a newer version of iTunes" and it will not open. HELP!! How can I revert the library as well?
I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..
-
I updated to the newest version of iTunes and now I can not open the program. I get the message "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes". What now? I'm using Windows Vista.
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
I had to uninstall iTunes because when I connected my ipod and was in that file and clicked on music to add songs that file was empty. Once I downloaded iTunes again a box appeared that said The file iTunes Library.itl cannot be read because it was created by a newer version of itunes..............so then I unistalled iTunes and downloaded again 4 different times and got the same message each time. I am using a laptop Windows Vista 64 bit system...please help
I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575 -
I am not able to open my iTunes on my HP pavilion dv7-3173nr entertainment notebook: I receive error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes". How can I correct this so that I can open my iTunes on my notebook?? dorothy278
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2
Maybe you are looking for
-
Problem with Java System Application Server *(Sun one 8 or J2EE 1.4 app server)
Hi, Iam able to deploy KODO JDO through JCA in Sun One App server 7, But iam unable to deploy in J2EE1.4 app server. I followed the J2EE1.4 guide developer guide it is compitable with JCA1.5 and also given backward compatibility for JCA1.0 I had remo
-
Issue with recursive join and filter records
I am having an issue with recursive join and filtering records for the following rules. The table, sample records, test script and rules are as below drop table PC_COVKEY_PD; create table PC_COVKEY_PD ( PC_COVKEY varchar(50), COVERAGE_NUMBER varchar(
-
HELP! - BEAN and CLASS interchange?
When I setup to a bean like: <jsp:useBean id="logger" scope="application" class="Logger" /> I can use the bean and bean's functions fine in the JSP, but not within functions that exist in the JSP like: jspInit() it says the "logger" is undefined. Is
-
I am not sure if this has been brought up before, but my MBP (late 2007), and I am sure many other similar boxes play PAL DVDs perfectly. No conversion necessary. I normally use VLC, but I checked with the Leopard DVD player and both work normally. I
-
Nevermind. I have the answer. The iPhone 4 opens xls, xlsx, doc and docx files too. The Excel file I was trying to open was a password and write protected document. Sorry for the needless inquiry. Jim