The Filter "Time Frame" in Sales Pipeline Change Analysis

Dear support.
In Sales Pipeline Change Analysis,
The Filter "Time Frame" can select only
"Last 7 Days","Last 30 Days","Last 90 Days".
I want to select other days(10days,60days...etc)
Is it possible to define it by customization?
Regards.

Dear experts
I don't have good solution and I am troubled.
Is not there the good wisdom?
Regards.

Similar Messages

Enabling the Local time stamp on Sales Order, Delivery, invoice & PO

Hi SAP experts,
I need the valuable inputs for the following requirement- the user ( India based)want to see the local time stamp on transactions VA01(Sales Order), VL01N(Delivery) and VF01(Sales Invoice), ME21N(PO). The system is currently fetching the Malaysian time on these.(invoice and delivery).
A small info about the issue: As India is 2.5 hrs behind Malaysian time so at 9:30 pm India time system date changes to the next day for us and any invoice done after 9:30 pm is showing next day's date. Also the time reflected on the Invoice is Malysian time which should be actually the local time. As per user, it is a non compliance on regulatory front.
To simulate the issue we have created an invoice on 3rd Jan at 4:01PM Indian Std time but the time reflected on the invoice is 18:31 which is MY time.
Also provide help in where to see the time settings for these sales documents?
I am new to the SAP, All the valuable suggestions are highly appreciated.

Dear All,
With the help of security team, we tried to change the Personal time Zone ( of the user) maintained in SU01-Defaults tab to INDIA , but did not get the expected results. THE SYSTEM TIME ZONE JUST MAINTAINED BELOW PERSONAL FIELD IS SHOWING UTC+8.
After the change , the invoice created at India time is reflecting +2.5 hrs ahead time.
Pls Suggest , how to acheive this. Any example ecenario can help a lot.
Thanks a lot in advance for the support.

Photo Booth: Audio and Video not syncing in the same time frames, really annoying

That's the problem.

Same problem here.
1. Reset ACLs
2. reset PRam reset SMC
3. repaired permissions
4. repaired disk
No issues found.
Reinstalled Mountain Lion....
issue is persisting.
FML
Machine seems to be running fine otherwise. Just happened to notice it when I tried to reord a short video of some guitar. Way out of sync. Horrid.
I made a new user account and the issue is continuing.
The only thing I haven't done is is completely wiped the drive and started fresh. Such a pain in the a## to do this. IDK. Definitely wasnt happening on snow leopard.

TS2481 I put in an event and mistakenly have it repeated infinitely. I deleted the first few occasions but now have an infinite number of repeats beyond the initial time frame I intended. How can I erase these?

Need help deleted events posted in 2015. Infinitely repeated but not linked to a single event with repeat selected.

Need help deleted events posted in 2015. Infinitely repeated but not linked to a single event with repeat selected.

How can I unlock numerous files at the same time (i.e. photos) so I can make changes (rotate etc)?

Im using Lion on a MacBook Pro 15in (just under two years old) and I would like to know if I can lock numerous photo files at the same time so I can make changes to them. At the moment when I select an entire folder to go through and make changes, ie rotate in Preview, I am told with each photo that I have to unlock it. I am going through photos I took of archival material and have nearly 5000 photos to adjust and make changes to. This small step is taking up a lot of time.
I realise there will probably be a common 'sense' answer to this but it alludes me at the moment so any help would be appreciated.
Thanks

Try this: https://addons.mozilla.org/en-US/firefox/addon/fox-splitter/?src=ss
OR, open a second Firefox window (''Firefox button > New tab > New Window'' or ''Ctrl+N''), load the second site, resize windows side by side.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can I change the text layers to a specific color at the same time and in the fast way?

Dear all!
I am using Photoshop CS5. I typed 65 text layers in my file and wish to change their colors to a specific Black Color, but I don't know how to select all the layers at the same time so that I can change all the text layers from Red Color to Black Color in the fast way. Now I only select one layer and then change. It means I must select and change 65 times for the text layers. Hope you can understand what I mean.
Thanks a lot.
My Kindest Regards,
LUCK

One way is to select all the text layers, select the type tool in the tool box
and set the color from the tool options bar.
MTSTUNER

Changing the System time in the JVM where Weblogic runs

Hi,
I am trying to change the System time where the Web-logic server (11g) runs using Mocking. I use "jmockit.jar" to mock the System.class. A Spring bean is created and through that I try to change the System time. I need to change the time for testing scenarios. For example, I need to backdate and do the testing for some scenarios. For the moment I do this manually and I want to automate this by changing only the time in the JVM where the application server runs. When I try to automate this using the Spring bean, I get an error as follows. Do anyone have any idea about this.
[WLServer adminserver] Exception in thread "Timer-5" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "DynamicListenThread[Default]" java.lang.IllegalArgumentException: No class with name "com.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.logging.LogRecord.<init>(LogRecord.java:139)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:33)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:48)
[WLServer adminserver] at com.bea.logging.BaseLogRecord.<init>(BaseLogRecord.java:70)
[WLServer adminserver] at weblogic.logging.WLLogRecord.<init>(WLLogRecord.java:63)
[WLServer adminserver] at weblogic.logging.JDKLoggerFactory.createBaseLogRecord(JDKLoggerFactory.java:74)
[WLServer adminserver] at com.bea.logging.LoggingService.log(LoggingService.java:216)
[WLServer adminserver] at weblogic.server.ServerLogger.logListenThreadFailure(ServerLogger.java:205)
[WLServer adminserver] at weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:197)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "weblogic.timers.TimerThread" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:256)
[WLServer adminserver] Exception in thread "Timer-4" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "ClusterNode-localhost" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at EDU.oswego.cs.dl.util.concurrent.Latch.attempt(Unknown Source)
[WLServer adminserver] at org.apache.jackrabbit.core.cluster.ClusterNode.run(ClusterNode.java:261)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "Timer-1" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "ClusterNode-localhost" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at EDU.oswego.cs.dl.util.concurrent.Latch.attempt(Unknown Source)
[WLServer adminserver] at org.apache.jackrabbit.core.cluster.ClusterNode.run(ClusterNode.java:261)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
[WLServer adminserver] Exception in thread "Timer-2" java.lang.IllegalArgumentException: No class with name "com.abc.common.service.impl.MockSystem" found
[WLServer adminserver] at mockit.internal.util.Utilities.loadClass(Utilities.java:71)
[WLServer adminserver] at mockit.internal.MockingBridge.callMock(MockingBridge.java:156)
[WLServer adminserver] at mockit.internal.MockingBridge.invoke(MockingBridge.java:85)
[WLServer adminserver] at java.lang.System.currentTimeMillis(System.java)
[WLServer adminserver] at java.util.TimerThread.mainLoop(Timer.java:495)
[WLServer adminserver] at java.util.TimerThread.run(Timer.java:462)
[WLServer adminserver] Exception in thread "weblogic.time.TimeEventGenerator" java.util.MissingResourceException: Can't locate bundle for class 'weblogic.common.T3MiscLogLocalizer'
[WLServer adminserver] at weblogic.i18ntools.L10nLookup.getLocalizer(L10nLookup.java:427)
[WLServer adminserver] at weblogic.i18n.logging.CatalogMessage.<init>(CatalogMessage.java:47)
[WLServer adminserver] at weblogic.common.T3MiscLogger.logThrowable(T3MiscLogger.java:325)
[WLServer adminserver] at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:126)
[WLServer adminserver] at java.lang.Thread.run(Thread.java:619)
OR
Do anyone know any other way to overcome this issue using some other mocking jar.
Thanks
Edited by: 913136 on Feb 8, 2012 2:32 AM

Hi,
I could manage to change the time in JVM where the Weblogic server runs. I loaded an Spring bean from my Test class and from that bean I set an offset (to shift the time) in the Mock class (say, MockSystem class). In this case I used the jmockit implementation for instrumentation purposes. The MockSystem class should not be instantiated by us and jmockit takes care of that part. What I had to do was defining the javaagent and another parameter ("-Djmockit-mocks=com.abc.common.service.impl.MockSystem") in the Weblogic server build XML (mentioned in the following URL[1]). But to work this the MockSystem.class file should be wrapped in a JAR file and included in Weblogic server/lib directory and define it in the Weblogic build XML file as a classpath. For more explanations visit this URL [2].
[1]. http://jmockit.googlecode.com/svn/trunk/www/javadoc/mockit/Mockit.html#setUpStartupMocks%28java.lang.Object...%29
[2]. http://code.google.com/p/jmockit/issues/detail?can=2&start=0&num=100&q=&colspec=ID%20Tool%20Type%20Status%20Priority%20Summary&groupby=&sort=&id=207
Thanks
-thiwanka-

File changes from more than one user at the same time

Hi,
two of my colleauges opened a photoshop file at the same time and both could make changes. Saving the file kills one person's changes, which actually shouldn't be possible. How can this be avoided?
Thank you
FriedaLee

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Default time frame for ICAL events

Ever since I upgraded to Lion, the default time frame for ICal events has been set to "entire day". Is there any way to change this?

Hi,
If you add a time to the event description, like "meeting 11am tomorrow", it should create an event (with the title "meeting" on tomorrows date at 11am with a duration of 1 hour.
Best wishes
John M

Upgrading to Photos When Event dates do not fall in the Event time period

I would like to upgrade my IPhoto library to Photos. My Library is organized by Events, and not all photos in a given event is for the same time frame. Example January 2015 Event may contain some pictures from the beginning of February if the event went over to the next month.
Do I have to make all my Events pictures have the same dates as the Event time period? (beach edit)
I noticed that Photos App puts everything in date sequence, so how do I maintain the pictures I want in a certain event?
I would like to organize my library first before upgrading to Photos
Thanks for your Help
Mel

Mel, when you migrate your iPhoto Library to Photos, all your events will be mapped to albums. For each event you currently have, you will find an album in the folder "iPhoto Events" with all photos from that event.
Don't change the dates of your photos, that will just destroy information. Keep creating new albums for set of photos you would previously add to one event.
You may also want to add keywords to photos you want to group in one album. Then you can use smart albums based on keywords.
Photos does not yet support batch changing of titles or captions. Also, you cannot add places in photos.
Before you migrate your library, you may want o do all batch edits for titles and captions, and ensure, that all your photos have places assigned.
-- Léonie

Sync Time Frame Settings

During the original 7 months using the Z10 my emails and calendar had synced perfectly with Outlook with the Sync Time Frame of 30 days setting. Yesterday I changed the sync time frame to FOREVER and my SENT emails and sub-folders no longer synced. After changing back to 30 days, most folder synced properly immediately except for the DRAFTS folder which is still not syncing a day later.
Anyone else experience these?
A sync time frame longer than 30 days and shorter than forever would be a huge improvement - i.e.: 180 days, 365 days, 720 days.

It seems many people are having email issues with Windows Live/ Hotmail/ Outlook accounts since the Outlook outage last Thursday...I still can't get my emails to my z10, though I can now access my emails over the browser...

Q10 Serious problem-Edit account-Not all the Connections were closed in the alloted time.

hello, when my Q10 work account isn't responding ,its ask me to "tap for more info" , i go to "System Setting" - Accounts --Set up email --select my work account email address (show "Not Connected) -- "Edit Account" -Configure the account settings for- always in red font : -Not All Connections were closed in the alloted time. no matter how I change server address, port and smtp server address , SSL..etc..finally solve is to keep delete my work email account and re-install. this is happen on my own work email address account. i have another recruit email work account with same company domain name. but never have this problem. hotmail, yahoo doesnt happen also. may anyone can help ? or only solution is to keep delete and re-install. fyi., this is my second Q10 used 4 mths back. 2st Q10 doesnt happen for all work and personal mail account.Thanks alot.

hello, when my Q10 work account isn't responding ,its ask me to "tap for more info" , i go to "System Setting" - Accounts --Set up email --select my work account email address (show "Not Connected) -- "Edit Account" -Configure the account settings for- always in red font : -Not All Connections were closed in the alloted time. no matter how I change server address, port and smtp server address , SSL..etc..finally solve is to keep delete my work email account and re-install. this is happen on my own work email address account. i have another recruit email work account with same company domain name. but never have this problem. hotmail, yahoo doesnt happen also. may anyone can help ? or only solution is to keep delete and re-install. fyi., this is my second Q10 used 4 mths back. 2st Q10 doesnt happen for all work and personal mail account.Thanks alot.

How can I get two cameras to aquire at the same time rather than one after the other

I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
Deater

Hi Deater,
Thank you for your post. Triggering from two cameras at the same time may be a little trickey, but it can be done. There are multiple ways to tackle this problem. If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW. You should also be able to use the triggering line on each board.
One of the best methods for triggering multiple boards is called GenLocking. The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a387b5c0ac6f6f4e86256c87005fcddf.
The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV. I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230&message.id=2691&requireLogin=False
Hope this helps!
Thanks,
Scott Savage
National Instruments
Applications Engineering
www.ni.com/support

How to make the iCal in iPad to convert the received events in the proper time according the time zone of the device

Heya.
I have the next event:
BEGIN:VCALENDAR
VERSION:2.0
METHOD:PUBLISH
PRODID:someId
BEGIN:VTIMEZONE
TZID:Central Europe Standard Time
BEGIN:STANDARD
DTSTART:20111002T030000
RRULE:FREQ=YEARLY;BYDAY=-1SU;BYHOUR=3;BYMINUTE=0;BYMONTH=10
TZNAME:Central Europe Standard Time
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:20110301T020000
RRULE:FREQ=YEARLY;BYDAY=-1SU;BYHOUR=2;BYMINUTE=0;BYMONTH=3
TZNAME:Central Europe Daylight Time
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DESCRIPTION:Some Description
DTEND;TZID=Central Europe Standard Time:20120919T163000
DTSTAMP:20120913T082257Z
DTSTART;TZID=Central Europe Standard Time:20120919T160000
LOCATION:Some Location
SEQUENCE:0
SUMMARY:Some Summary
UID:1cf04d1c-2b5c-474c-86f4-108101da9b7a
END:VEVENT
END:VCALENDAR
I am in another timezone - GMT + 2.
When I am adding the event to outlook in win7 - it is converted to my local time = from 17 to 17:30.
When I am adding it to a friend's Mac - it is converted to his local time.
When I am trying to add it in a Ipad which is set to the same timezone - GMT + 2, and with timezone support on, it is not converted but set to 16 - 16:30 and the timezone for the event is put to floating, so what to change in the setup of the event to recognize it and converted to the right time or maybe I should change something in the iPad.
Thanks in advance

Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments

[Urgent!!]How to control the running time??

Hi,
I'm an undergraduate researcher in the University of Michigan. I used NI labVIEW FPGA on my current project and now i meet a problem.
I have a labview code that has runs with 3 subroutines. they execute one after another for a given time period for each iteration of the entire code. that is i built them in a flat sequence structure inside a large while loop and each of the subroutine is a while loop with several subvi's in it. not that complicated but i have to specify how long each subroutine runs. now i have a problem to set that execution time. i don't know exactly what kind of timing function i shall use. i tried the "Elapsed time" function but that only works for the first iteration. from the second iteration on each subroutine only runs for once, instead of continuing to run until the given time elapsed. so i don't know how to correctly control the running time. It's reallly urgent, so could you please give me some suggestions about it? Thanks a million!!
Xiaofei

Thank you for your suggestion!
sorry but that this method won't help because my code is sort of difficult to put into a for loop .
the logic is like this: first the output is set to 0 for a user-defined amount of time (means no excitation). secondly it gets excitation and gets output but no data saving is allowed for a user-defined amount of time. at the same time, one paramater is automatically changed. (the reason for not saving data is that there is a transient response when the parameter changes). thirdly, data saving begins with the same
parameters as before, also for a user-defined amount of time. and then after these three steps one iteration is done. for iterations there is a different parameter, the user defines the range of the parameter and the number of different values in between and the code will do the increment at equal intervals automatically. my problem now is that i don't know how to correctly control the time. i have tried various ways but no one works.
the second problem is that i don't know how to let it run and not saving data and then saving data without changing everything else. what i have now is to call the same VI twice, once for only running and no data saving and the other for saving data. but then the problem is that in between these two routines, the output suddenly becomes zero and gets excited again after i call it. My professor said that i cannot let the output become zero, otherwise there is no meaning in waiting for the excitation to become stablee. but then i don't know how to call a VI only once and let it do the saving for only the latter part of the running time. i have been working on this thing for two weeks now and still have no idea....Sorry the problem is long and tedious, but if anyone have any idea about it, please let me know, i will be most grateful. Thanks a million!!!

The Filter "Time Frame" in Sales Pipeline Change Analysis

Similar Messages

Maybe you are looking for