The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt

I am getting below error message while search crawl in sharepoint foundation 2010 search for only .VSD files and not for any other docs type.
The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt. 
I have installed the Microsoft Filter Pack 2.0 in search server but still i am getting the same error.
<//span>
Any one's help will be appreciated.
Regards,
Rashmi
Rashmi Singhal

Hi Rashmi,
1. Checked the file extension is added or not to the search file types.
2. Checked file name has any invalid characters.
3. Resetting the crawl index and run a full crawl .
Best Regards.
Kelly Chen
TechNet Community Support

Similar Messages

  • When my macbook goes to sleep from non activity when I return the wifi is not on.  When trying to log back onto my hub it says it is out of time and I have to reboot each time.  Most annoying, any solutions please?

    When my macbook goes to sleep from non activity when I return the wifi is not on.  When trying to log back onto my hub it says it is out of time and I have to reboot each time.  Most annoying, any solutions please?

    If you are not using data and the iPhone goes to sleep, it will automatically drop the wi-fi, and will not reconnect until you wake the phone up. That is the way it is designed. The only way around that is to turn off cellular data while at home and on wi-fi.
    Cannot answer the xbox question since this is an iPhone forum and I would have no idea.

  • HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear.  i also have a 2013 Macbook Pro which shows the airplay icon.  do i need to enable airplay on my early 2011 or is there an update that is needed?  Confuse

    I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear.  i also have a 2013 Macbook Pro which shows the airplay icon.  do i need to enable airplay on my early 2011 or is there an update that is needed?  Confused.

    To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
    About AirPlay Mirroring in OS X

  • HT201269 why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options

    why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options

    Let me start with the general advise...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • When trying to upload a report as a PDF file to my clubs website, I get the message 'should be a PDF file', while it is a PDF file. What is wrong?

    Writings, produced by me and some collegues are to be uploaded to some site. This writings are PDF files. When trying to upload an error message apperars, telling this file is NOT an PDF file. In Google Chrome and Opera there is no problem.

    Hi H.Barker,
    Zou is correct, LabVIEW supports all GIF bit depth images 24bit and below.
    Thank you for forwarding the GIF images, I also experienced the same error when trying to import the "logo.gif" image in LabVIEW however I was able to import the image when I opened it in Microsoft Paint and resaved it as a new GIF.
    This suggests there is a corruption in the original GIF file generated on the web, for example a "terminiating block" may be missing at the end of the GIF file. LabVIEW is not forgiving of GIF images that do not meet the GIF specification whereas other Windows editors may be, it seems that opening and resaving the GIF file in Microsoft Paint added the missing characters thus allowing for the file to be imported into LabVIEW.
    I have attached the working GIF image to this post.
    Hopefully this assists with your application H.Barker.
    Many Thanks
    Jamie S.
    Applications Engineer
    National Instruments
    Attachments:
    LOGO GIF (2).gif ‏34 KB

  • My IPod 4th doesnt not turn on when i plug in to charge it its still wont turn on i need help and the screen is black help please!!

    ok last night i was ok and nothing happend to my ipod but, when in the morning just to cheack the time its off and i didntturn off the ipod so i thought if it out of battery ill charge it. then when  i plug it in to an outlet it still wont turn on please help i tried everything how turn it on and such it still wont turn on help!!! Please!!!

    Try here:
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • When trying to save a page, I can enter file name etc, but don't see the SAVE button to click SAVE. It's like it's below the screen or something. How do I fix this?

    I was in a webpage and was trying to save it. I selected SAVE AS from the drop down menu. Then I entered the file name, and selected TEXT ONLY as file type. Only thing left to do was click SAVE, but there was no SAVE button.

    You can check it DTA or another extension isn't causing this problem.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • VSS Error: "An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes."

    Hi all,
    at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
    error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
    It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
    On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
    Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
    backup is written directly to SAS tape loader. There error is generated on this server.
    Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
    on this server.
    Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
    As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
    is the event log (translated from a german system):
    Event ID: 12293
    Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
    the Volume Shadow Copy Service.
    Process:
    Volume Shadow Copy polling
    Volume Shadow Copy delete
    Context:
       Executioncontext: Coordinator
       Executionkontext: Coordinator
    And
    Event ID: 8193
    Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
    Process:
    Volume Shadow Copy delete
    Context:
       Executioncontext: Coordinator
    There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
    http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
    What I already have tried:
    Disabled Antivirus during the whole backup
    Installed latest Service Pack for Backup Exec
    Rebooted the server
    vssadmin list writers do not show any errors
    consult eventid.net for other possible solutions
    no limits set for vaa
    Anymore ideas from you guys?
    Best regards,

    Hi Shaon,
    vssadmin list providers gave the following output:
    vssadmin list providers
    vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
    (C) Copyright 2001-2013 Microsoft Corp.
    Anbietername: "Microsoft File Share Shadow Copy provider"
       Anbietertyp: Dateifreigabe
       Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
       Version: 1.0.0.1
    Anbietername: "Microsoft Software Shadow Copy provider 1.0"
       Anbietertyp: System
       Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
       Version: 1.0.0.7
    Unfortunately theres not Symantec VSS Provider listed.
    Best regards,
    Christoph

  • I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    Hey there Frank0619,
    If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
    Issues installing iTunes for Windows
    These in particular: 
    Make sure you have an administrator account.
    To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Install the latest Microsoft Windows updates.
    To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Download the latest version of iTunes.
    The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
    Disable conflicting software.
    Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig: 
    Using Msconfig to troubleshoot conflicts in Windows XP
    Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
    Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
    Restart your computer.
    Install iTunes.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still

    When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still persists.  How can I fix it?  thank you.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • HT1414 i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

    i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

    Thank you. No my phone hasnt been jailbroke, therefore I'll keep trying.

  • "The alias could not be opened," When trying to access networked PC

    I get this message when trying to access a networked PC
    After a reboot i go to my network and I can see the XP PC there, after i double click it asks for user name and password, but it always comes back with this message.
    "The alias could not be opened, because the original item could not be found"
    I have 2 PC's on my network, I can access one with no problems, but not the other.
    Any help?
    Thanks

    Sort of fixed this issue by connecting to the server using the name and not the ip address.
    Weird

  • Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in

    Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file.  HELP!

    If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
    There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
    Gene

  • HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    I dunno, that doesn't make any sense to me.
    I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes.  There are only 3 that run in 32 bit only.  They are all 3rd party, and none of the prefpanes are non Intel.  Like I said, I have never owned a PPC machine.  Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well.  The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
    As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box.  All using the same hardware. but one at a time.  I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to.  (Which I don't)  I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact.  How could ML system preferences be trying to launch prefpanes from a totally different machine?

  • Could not open key when trying to install Apple Application Support

    I  can't get the apple application support to install on my coomputer it says "Could not open key: Unkown\coponents\da4bc898f25f5bd0af18c3b3b1a1ee8\0dc8c851b56a0d742add098a4295f0 8a. Verify that you have sufficient access to that key, or contact your support personnel."  Can anyone help with this.  Thanks

    under regedit, checked permissions on this key and "allow" "full control" are checked for the administrative profile that is logged in, so there should be access to that key.
    Just doublechecking an exotic possibility. Does your SYSTEM account have full control of the key, too? (Peculiar things can happen when that loses permissions on a key.)

Maybe you are looking for