The final footage flicker on tv. I use encore cs4 4.0.1.048. With the same settings on other pc it's ok.
The final footage flicker on tv. I use encore cs4 4.0.1.048. With the same settings on other pc it's ok.
The crash report that you posted says the crash occurred during an OpenGL instruction. This means that there is a problem with OpenGL in your current graphics card drivers. I would suggest you do some research online about your graphics card model and its OpenGL 2.0 support. Perhaps there are others out there with similar issues in other OpenGL based applications.
Here are a
few more troubleshooting tips you can try, if you still have the strength for it. I'm sorry you're having such a hard time, but we'll try to get you through it.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ
Similar Messages
-
I am a current Final Cut Pro7 user and looking to switch over to Premiere Pro CS6. We edit approx. 100 short (15 sec.) videos daily, and then select them all at the end of the day and batch export them over night using the same export recipe for all. I have having trouble finding an easy way to do this in Premiere pro CS6, as command +E is grayed out if i select more than one sequence at a time.
so far, it appears that i have to select each video individually and manually set encoding recipe and export location for each.... Not only would this be terribly time consuming, but it leaves a lot of room for error and missed videos. I thought i would be able to send all of the sequences to Adobe Media Encoder, but i dont see that option either.
Any suggestions/
thanks!Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time. -
My wife and I both have iPhone 5s, I can't send text messages to non iPhone people that I use to but iPhone people I can, My wife can send text to non iPhone numbers. I have checked and we both have the same settings. Both of our phones are up to date 7.0.4.
The ability to see and send calendar invites is a function of the calendar you are subscribing to and who owns it. We need more information, like what calendar are you subscribing to? MS Exchange? Google? Mobile Me?
-
Creating a Master virtual hard disk and using the same for all other VM's
Hi,
We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
my requirements :
1) create 10 VM's
2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
3) After creating the VM's change the HDD size.
-- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
After creating the VM's ,i will change the system names and activate the windows accordingly.
Will there be any implications ,if we can/will do like this.
Thanks.Hi Suren424,
I think Using Differencing Disks may cover your needs .
Please refer to following setps:
"Create the Parent Virtual Machine Configuration and Virtual Hard Disk
Install the Operating System, updates, and common software
Generalize the installation
Prepare the parent virtual hard disk
Create the differencing disks
Create virtual machines that use the differencing disks
For details please refer to follwing link:
http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Using auto exposure give the same settings for every picture
for some reason, aperture 3.0 has been giving me the same settings when using the auto exposure on raw files. i swear it wasn't that way when i first started using the program. regardless of the image, it always sets an exposure of 1.0 and a recovery of 0.0.
GLITCHY GIMMICKS Just imported 2 raw & 2 Jpegs, Adj WB & Exp. on a raw. Then went to Library & turned on Quick Preview, went back to Adjustments and could still carry out adjustments. Went to another image and it still allows adjustments but the adjustments are being applied to the previous image. Typical Aperture Glitches. Apple would do better to get the stuff they have; working proper, before producing more and more GLICHY GIMMICKS Allan
-
Two very different results using the same settings (H.264 / Quicktime Pro)
I’m a bit confused, I have used Quicktime Pro (v7.1) to encode DV into H.264 for iPod and this particular video is 18 minutes long and came out looking very good with the following settings;
VIDEO: H.264 at 200kbps, Baseline Profile, 25fps, Auto Key Frames, 320x240 or 640x480, Multipass Best quality encoding.
AUDIO: AAC Audio at 96kbps, 24kHz sampling freq, Stereo.
However here is the twist…
When I use the same exact settings to encode just the 30 second opener (from the 18 minute video) the encoded opener looks bad and blocky!
Why? Same settings would make you assume that you should get a same or similar result, or am I wrong?
The reason I have tried encoding this 30 second opener is that I am trying to work out which settings work best on the iPod (another issue) and I don’t want to spend hours test encoding the full 18 minute video, as you know H.264 is SLOW to encode!
So can anyone help in regard to two very different results using the same settings?
Regards,
J
PC Windows XPAlvin,
Is it a commercially-released or home-burned CD?
If it's commercially-released, try "encouraging" the recalcitrant computer by using the iTunes Advanced menu > Get CD Track Names command when it shows Audio CD.
If it's home-burned, you will find that only the computer that actually burned the disc will know what's on it. The information won't be transferred to another computer.
Let us know which, if either, of these situations applies to you. -
Hi All
Can anybody help with this problem when trying to authenticate on the Microsoft Exchange Sever.
I have been trying to connect the mail client on the IPAD2 to my company email (Exchange 2007 server)
There appears to be an issue with the SSL settings for the IPAD 2 and Apples new OS
I know that it’s not supported but I also know that the previous version of the IPAD worked fine using the same settings.
Just to confirm I can access the email via Safari therefore I know that the Public Key is loaded in the web browser.
Can anyone confirm that the Public Key has been installed on the IPAD 2 email client?
Is there anyway to edit the SSL settings?
Thanks in advance fro your help
Regards
PatTry using Static IP and force a connection.
You can get the settings from your other devices that are connected to the router. -
My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.
Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out. -
Is there any option to recover a file we saved with the same name that other by mistake in a MAC PC
is there any option to recover a file we saved with the same name that other by mistake in a MAC PC
There's a slim chance. +*Stop using the drive IMMEDIATELY.+*
Then see: [Data Recovery|http://web.me.com/pondini/AppleTips/Recover.html]. -
How do I convert multiple RAW files to JPEG with the same settings?
I have a considerable number (800) RAW files to convert to JPEGs. I am happy to convert them in batches requiring similar settings to save time whilst of course, leaving the original RAW files to make more individual adjustments if required later.
I thought there was a way of doing this in small batches to save time but can't recall how to do it.
Can anyone help?Many thanks Barbara and dj_paige.
What I didn't mention is that I'm using PSE 5 with ACR 4.6, if its relevant. I'm thinking of updating to the next version when its out in the hope that it will run with Windows 7 64 bit or I may go to Lightroom.
I can now see that I can batch convert a whole folder of files using "process multiple files" as dj_paige suggested but that is too many at once as the settings I choose won't be relevant for all the pics in the folder.
I was hoping to batch convert say 5 or 6 similar photos at a time with the same settings. I'm not quite clear what you're suggesting but I'm hoping that its a "work round" using two stages to achieve this.
I can't see a list of open files within ACR to ensure that they are all selected as you suggest.
What does clicking Open rather than Done mean? Does this amend the original RAW file to the settings selected so that if I then "process multiple files" on the whole folder to convert from RAW to JPEG they will in fact have already been processed in smaller groups so I can convert without applying any further changes?
If so, what settings should I apply to "process multiple files" to ensure a simple conversion of file type rather than any further adjustments?
Any further help on this would be much appreciated.
Andrew -
Our Bank's core processor has rewritten their product to run in a web browser. Their browser of choice is Firefox 3.6. The specifications from our core processor specify specific security and settings parameters that must be adhered to by all users for their product to run properly. Is there a way to globally configure these settings via the registry or group policies to insure everyone who logs in to a given workstation opens Firefox with the same settings? Thank you for any assistance you can provide - Steve Gish, First Bank Kansas.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)You can try:
*http://kb.mozillazine.org/Locking_preferences -
my iPhone 4 appears with no service every day, i have to make restart and a few hours later again the same problem, Any other solution please???
This is almost always a symptom of a phone that was jailbroken or hacked to unlock it.
Where did you get the phone? -
I cannot send or forward email but I do receive mail OK. All of the same settings work on my wife's IPhone and our Ipad. All are running on IOS 5.0.1. I get a message of your email has been put in your outbox because the receipent "%@" does not allow relaying.
Try deleting the mail account and setting it back up again.
-
Follwing query fails on one database, but the same works on other Database
Hi,
The following SQL fails on one database with ORA-01722 but the same works on other database.
SQL> SELECT i.version, d.name, i.instance_name, i.host_name
FROM v$instance i, v$database d, v$parameter p 2
3 WHERE p.name = 'instance_number'
4 AND DECODE(p.value, 0, 1, p.value) = i.instance_number;
AND DECODE(p.value, 0, 1, p.value) = i.instance_number
ERROR at line 4:
ORA-01722: invalid number
both databases are at same version (10.2.0.1) both are on same machine.
Initailly I suspected NLS settings, I am surprised to see NLS settings are also same on both the databases.
Any thoughts why is it happeningThanks for the reply
Yes, i know that i am comparing varchar against number.
bu there is no way that the database where the query is working has correct types on both sides as the tables are standard oracle dictionary tables.
Yes, i tried this earlier, it works
AND DECODE(p.value, '0', '1', p.value) = to_char(i.instance_number)
it is very weired to see that error, i feel it something else that causing the trouble. -
we have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.
Rajiv KumarHi,
More details about your discussions forum will make others easier to find a corresponding solution on your requirement.
If you mean there are three Discussion Board list waiting for synchronizing, I would suggest you create an Event Receiver for the three Discussion Board list.
Here is a link with code demo about how to copy items from one Discussion Board to another including Replies:
http://spcodes.blogspot.com/2013/03/programmatically-copy-items-from-one.html
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support
Maybe you are looking for
-
Adobe Reader XI - dynamic PDF Form and the E-Mail Dialog
Hi Community, I have a dynamic PDF Form and we use the E-Mail function to save the XML-Data to local harddrive. That works until Adobe Acrobat Reader 10.1.2. But with the Adobe Reader XI (11.0.4) the E-Mail Dialog has changed so I am One is forced to
-
Hi Experts. I want some clarification, we are implementing BPM - Solution Manager. I was checking the BPM Monitors Catalog. I didnt find any thirdparty interface monitoring. Our client has SAP and it has got some thirdparty interface such as Vertex,
-
Weblogic server givning error http: 500
Greetings ! i had an issue with weblogic server , i configured weblogic server 10.3.5.0 front with apex 4.1, while working on apex i got an error http: 500 page not found, when i i saw weblogic console i found error "EXEC FAILED:No more data to read
-
Navigation Issue on HC 91, Tools 8.51, SQL Server 2008 on Windows 2008
Hi Guys, I installed HCM 91 -Tools 851-SQL Server 2008 on Windows 2008 server. App server running perfectly, initiated web server fine. When I login in n-tier/web via PS userid, navigation to Panels are fine but when I try to click on any page, it gi
-
Please help me MSI 5950 ultra users...
Sorry my bad english. I'm Hungaryan. Send me please FX5950 Ultra-VTD256 original BIOS! My brother crash my VGA bios. [email protected] THX!