The FInal Step, i have created a program to all my specifications and i am now ready to connect the hardware
I have created a program to all my specifications and i am now ready to connect the hardware.
My program was created to automate the cleaning process of an atmostpheric chamber. It controls two valves based on the pressure readings and time intervals. When creating this program i figured that if a could make a boolean turn on or off based on the pressure readings then it would be no problem somehow wiring it to send a signal to the hardware. I have reached that point and don't know how to proceed. I was told that the first step is to figure out what kind of Card is being interfaced with the program.
I have read up on this subject and it seems like there is many ways to do it.
All sugestions will be greatly appreciated
I'm not sure how you can create the program without knowing what hardware you're going to be using. But... What have you read up on? You will need to select your data acquisition hardware. What kind of signals do you have? What kind of transducers do you have? What kind of actuators do you have? You may want to start with:
Introduction to Data Acquisition
Digital Voltage Measurement Fundamentals
Complete Data Acquisition Tutorial
EDIT: Re-reading your post and seeing Waldemar's response: Do you actually already have a card installed?
Message Edited by smercurio_fc on 07-29-2008 02:25 PM
Similar Messages
-
My husband just got an iPhone also, can we have separate iCloud accts? All my contacts and appointments are now on his phone too.
I had the same problem too.
Yes, you can go apply for a new AppleID, which would be <your account>@icloud.com.
Then put this new AppleID into the icloud account field.
After this action, you will not be seeing the same contacts and appointments.
But for the itunes store, you still can use the same AppleID so that you can share purchases.
My wife and I use separate icloud accounts, and then we use a 3rd appleid for our itunes store. This allowed us to have separate contacts but still share itune purchases. -
HAVE INSTALLED PAGEMAKER, BUT BECAME CONFUSED WHEN "STUFFIT" SEEMED TO BE REQUIRED FOR NEXT STEP. NEED HELP IN FINAL STEPS IN DOWNLOADING PAGEMAKER FOR USE.
>I would like to purchase a new mac with the appropriate operating system that will
run pagemaker 7. If not, I understand that my current mac, Mac OS X, version
10.6.8, processor 2.8 GHz Intel Core i7, Memory 4GB 1067 MHz DDR3 will not support
either Pagemaker 7 or InDesign. My question is what package can I purchase that
will satisfy one or both of these needs? Thank you for any guidance.
R_Kelly created the discussion
"FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP.
CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER
IS USEABLE. THANK YOU"
To view the discussion, visit: https://forums.adobe.com/message/6607524#6607524
> -
During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.
Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
Mylenium -
I have created a journal on my iPad 2 and shared it on iCloud, it contains screenshots of webpages. But when I try to view the journal on my desktop only some of the images appear...any ideas why this is happening?
Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
How can I Publish to a Folder just one of the several websites I have created using iWeb?
How can I Publish to a Folder just one of the several websites I have created using iWeb?
it drives me nuts having to emove all the other websites when I want to upload one.
SparrowFor iWeb, I like to do only one site per domain file. I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
Here are a few of my iWeb sites:
http://www.newcovenant.org
http://www.visionmultimedia.org
http://www.visioncomsolutions.com -
How do I sync my iPod to iTunes? I've used the final steps from Article HT1329, but when I open my iPod there is no "iTunes" folder. Please help!
Ah I see. That folder would only be there if you had perfomed the earlier steps in that section.
Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2 -
when I start my laptop it loads a third of the way and shuts down automaticallyI've tried to safe boot, repairing discs and clearing RAM but nothing has worked. basically I've come to the final step of having to a erase my hard drive and reinstall mountain lion however Apple support suggest that I install from a disc however I installed mountain lion from the App Store. can anyone help me go about this?
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account
You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device. -
Using iBooks Author to make a book you have created a link to another part of your book but how do you get the reader back to the original page?
Asking me to be verbore is a dangerous thing :-)
When you eneter information into iTunes Producer for uploading, the info must match what is in the internal metadata. In this case, the book is called Mississippi, but in iTunes Producer it is spelled Misssissippi. There is an extra "s". This will cause an error.
- Fabe -
I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.
You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
To access the email:
Entering iCloud email settings manually in Snow Leopard or Leopard
Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page. -
How I can erase the components that I have created in a content area?
hello. Somebody knows how I can erase the components that I have created in a content area. I have created an area of content and the archives, categorias or perspective that I generate not let erase. The same it happens to me to the forms, reports and other components created under a certain application
goto portal navigator --> content areas --> next to the content area --> click Edit Properties --> Items tab --> last button on the page is Purge..
this should take care of it -
I have created a 12 minute slideshow on imovies and burned it through idvd. I would like to share it with my relatives in Europe. what would be the best means of doing this? uTube? any other ideas?
You could put it on Youtube, but then they don't have a cop saved to their drive. You could also upload it to your Dropbox and make it public. Note the size of the file, Dropbox and Youtube can only handle such big files, and if your family has a good internet connection (download/playback speeed over bandwith).
-
I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?
(I tried to just write this as a reply to someone who had already asked the question whos problem was magically solved after posting the question and the site was not allowing me to post to it so here I am)Additionally, when I try to sort the photos by date to easily extract the newest photos which I have not yet uploaded, it is unable to put them in correct order regardless of the fact that the date is correct. Only the videos end up in chronological order for some reason while the photos stay in order by name.
-
everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?
everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?
Maybe you are looking for
-
i kept my apps on pause to let the other app download/update faster, now the paused apps cannot download/update, does anyone know how they can re-download/update it without having to delete the current apps?
-
My grandson got his little hands on my ipod and has locked me out. I now get the red lable of doom and it tells me I must connect to Itunes to fix it. Problem is I don't have the orginal computer I synced up with. (It crashed about 5 weeks ago). We
-
80G Video iPod - Not sure what the problem is
So this problem just randomly started occuring. What will happen is my iPod will freeze completely, and then it will go to this screen which has a warning i have never seen before. It is an iPod with a triangular warning sign on it (with exclamation
-
I am looking for a way to implement a column domain as a radio button (e.g. Yes or No). So far I have only seen JHeadstart generate a list box. I cannot find any reference to radio buttons in the User Guide. Is it possible to generate a radio button?
-
Please any one tell me what is cache purging and seeding
hi all what is cache purging and what is cache seeding i am getting full confuse using obits we can seed the cache ,means we are going to store the report result in cache memory or what please any one make me bit clear on purging and seeding thanks