The firefox button is gone. can't get it back. so now firefox is useless, but I really prefer firefox. HELP
the tab bar disappears unless the cursor is on it, and there is no "firefox button"
I have restarted, dumped and redownloaded firefox -- all to no avail.
Is there any way to get it working properly again?
Do you mean the orange Firefox button in the the top left hand corner?
If so, right click on toolbar space and uncheck Menu Bar - the button will appear.
Tab bar should re-appear as cor-el says. If not try right clicking in toolbar space, then checking and unchecking "Customize".
Similar Messages
-
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
i plugged my iphone into my desktop mac to put my itunes music on and now all my contacts and photos are gone can i get them back?
You can get your information back if you have previously done a backup in iTunes or iCloud.
http://support.apple.com/kb/HT1766
Go to this site and click on how to restore from backup.
This will help you with putting the information back onto your device. -
I dowloaded ios5 for my iphone4, and when i finished the backup i lost all the music and all the videos i bought from the iTunes store. How can i get it back?
Backup do not contaiuns music or apps, you will either need to resync them from your itunes computer, or you can go to purchase history in itunes or app store app and go to purchase history and redownload them.
-
i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?
If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.
-
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
in my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears
Make the iTunes window wider.
It is on the far right. -
"Reply" and "Forward" and "Move" have disappeared rom my email, so I have to go into "mailbox" in the top bar. How can I get them back?
under the "view" menu open custimixze toolbar. Then drag those from that list back up to your tool bar.
-
My iPad has a white screen after trying to restore. I try and restore again and the same thing happens and we are back at the white screen. How can I get it back?
type HT4097 in the search bar. its unable to update or restore iOS. Follow the instructions and if that does not work then id go to the local apple store.
-
Why are songs/albums deleted off of the iTunes store? How can I get them back on the iTunes store? PLEASE help. Thank you.
Perhaps the copyright holders chose to remove them. What album were you after?
tt2 -
i have two iphones , i lost one and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...
Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik -
HT201303 i forgot the security answer! how can i get it back ?
i forgot the security answer! how can i get it back ?
If you already have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox).
Or you could see if the second half of Kappy's reply in this thread helps : https://discussions.apple.com/message/20357006#20357006 -
HT1349 i've been listening to a podcast but the pause button disappeared, how do i get it back?
I've been listening to a podcast on my computer but the pause button disappeared, how do i get it back?
I had this same issue after I upgraded. Have iTunes re-scan your library for iTunes Match (Click "Match" along the top row of your library -- Songs Albums Artists... etc.). After it finished re-scanning my library I could download songs again from iTunes Match.
-
I followed the instructions on your site and Roboform's site, but Roboform doesn't appear in the Customize Toolbar window nor does it appear in the Extensions list. How can I get the Roboform Toolbar back?
Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.
-
What happened to the sidebar in 12 ? Can I get it back
what happened to the sidebar in ITunes 12 ? Can I get it back ?
Go through each of the sources Music, Movies etc. and select Playlists. Use the elipsis ... to enable sources. Apps, Tones, and Internet Radio don't have a Playlists button, the others do and remember your selection. Not exactly the same as the old sidebar, but not too different.
tt2
Maybe you are looking for
-
CAPTURE RUNTIME REGION VALUE ITEM DELIVERY ADDRESS TAB IN PO
Hi Friends, I am working on P.O enhancement which updating a custom field in custom tab in P.O item as below. if docuement type 'ZY' ,, account assignment category 'A' or 'K' material group '35' and delivery address REGION 'CA'. then update the flag
-
In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no lo
-
Hi, Hopefully someone can offer some advice, I may be missing something obvious here. I'm currently trying to write a feature event receiver to apply web.config modifications that are required by a recent project. The feature is web application scop
-
Will the added support Cyrillic fonts in the future?
-
Hi, I am trying to load a flat file in .csv format but whenever I open the file I am losing the leading zeros. It is very cumbersome for me to do those changes in notepad. Does one know how to keep the leading zeros even when I open in excel and