The firefox setup 3.6.3 will not start on windows xp after the extracting process

What I Did first was I Downloaded mozilla firefox 3.6.3 from mozilla.com for windows and after I run It , the installation process asked me to run it or cancel it to which I ran it and after it extracted , it just wouldn't show up on the desktop but is visible in windows task manager [my computer is windows xp]and I am Logged on as the administrator as well.
== every time I tried to install mozilla firefox ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727)

thanks chris for the reply back,i have solved the massive problem i have had with MF 3.6.3 it ws COMODO FREE FIREWALL i had a sneaking suspicion all a long it could have been that but was not sure?,my pc had slowed down since installing comodo i am pretty sure of that,there were lags and pauses ect ect on general usage of the pc even though cpu usage was ok?,so maybe if many pc users that have comodo firewall installed they might like to try a change to another firewall and see if it helps,i went back to OUTPOST FREE FIREWALL which i had for ages without ANY problems whatsoever.
regards
john
mozilla firefox build 3.6.3

Similar Messages

Firefox version 3.5.16 will not start under Windows Vista and Windows 7 32bit

I have a Windows Vista computer that will not start any newer version of Firefox than 3.5.16. The process will run (as seen in the Task Manager) but do nothing.
I have since updated Windows to version 7 and the problem persists.
I have tried uninstalling Firefox and all Addons (flash-player, pdf-reader) and deleting all files (even user-specific ones).
Firefox can't be started in Profilemanger or safe-mode either.
Is there anything short of reinstalling windows I can try?

Solved it!
It was a dodgy version of Firebug (1.6.2) running, which would kill the disable/update process. It was killing something on the first run that would corrupt my Firefox.
How I fixed it:
* Download the latest Firefox
* Install Firefox 4 (as Standard) in-place upgrade
* Before finishing, un-tick the "Run Firefox Now" button
* Hit Finish
* Find Firefox in the Start Menu and hold Shift and click the executable (safe mode)
* Leave everything disabled
* You should now have a working Firefox!
Remove/update your add-ons as needed. I only had to upgrade Firebug in safe mode to get it working.
Odd how the check for updates completely broke this Firefox, wonder what was so bad about Firebug.
Hope this helps at least one other person! The "Run in Safe Mode" option is so hard to discover now when your browser is broken!

Firefox 3.6.x will not start on Windows Vista after upgrading from 3.5.13

I have tried to upgrade Firefox 3.5.x (currently 3.5.13) to several versions of Firefox 3.6.x (currently 3.6.10). Whenever I try to open Firefox after the 3.6.x install, nothing happens. This occurs even if I uninstall 3.5.x first. If I uninstall 3.6.x and reinstall 3.5.x everything works fine.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Help! After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
3. After creating the second partition, close Disk Utility and install OS X on the second partition.
4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
5. After doing that, repeat the step 1.
6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
7. Close Disk Utility and install OS X on the first partition.
After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)

HT3964 My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

TS2570 My Mac Book Pro will not start up. I ran the AHT and received the following error:

My Mac Book Pro will not start up. I ran the AHT and received the following error: 4SNS/1/40000000:Th0H-90.750. Anyone know what this means?

I have no idea how much it will cost to repair. I don't even know what the exact problem will prove to be. It may be quick if it isn't a motherboard problem. I just don't know. Take it in for a service diagnostic, then they can tell you what is involved.

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

The "Terminal" Application in my Utilities will not start up

The "Terminal" Application in my Utilities will not start up. The icon appears briefly in the dock, then disappears. I have repaired disk permissions from the Leopard installation disk, and have tried logging on as a different user - to no avail. Version is 2.0.2 How can I repair or replace the app? Tks.

Just tried your advice to check Console, but Console crashes right after startup...
You seem to have more problems than just Terminal.
You can view the logs directly in /var/log/system.log
You could use iTerm <http://iterm.sf.net>.
Another approach would be to download TextWranger that can open text files anywhere on your system.
<http://www.versiontracker.com/dyn/moreinfo/macosx/18529>

My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs. What to

Hej!
Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.
What to do?
/yoel

Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
After setting up the setting up the system.
I ensured the following : (although begrudingly) so I could do a system restore if needed.
-I disabled Anitvirus & Firewall
-enabled Volume Shadow Copy Service
I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
i also downloaded and installed the 32 bit versions of :
C++2008 redistributable (32 bit)
C++2008 SP1 redistributable (32 bit)
I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
I installed Photoshop Elements (32 bit)
I started both apps and updated them to 12.1.
Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7. can someone help me?

I had Lightroom 5 and the creative cloud photographer bundle. upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7. just dead in the water. any help?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

The firefox setup 3.6.3 will not start on windows xp after the extracting process

Similar Messages

Maybe you are looking for