The firmware upgrade file is not supported on this hardware version MI424-WR Hardware Ver. C

Hello - I have been troubleshooting for quite some time a problem that only occurs on my wireless devices.  8 out of 10 times I fail to obtain a IP address from my MI424-WR.  My connection to the device is successful, however, DHCP times out.  I have connected to many other wireless routers in other locations in the last 4 weeks and have isolated my issue to my connection with my FIOS router.  That is to say that when I am elsewhere I do not have this problem.  I contacted support today, and the tech I spoke to was very nice and also clueless.  What is the latest/current hardware ver of the MI424-WR Verizon is shipping?  The tech said he could not tell me what ver the one he had in a lab was.  If l log into the router under firmware upgrade I notice the message in my subject.  I have had FIOS here with the same router since 9/2007.  Any help would be apreciated.

That brings up something I have been curious about...could you see if this might work for you?
-First and foremost, log into the router
-At the top click Wireless Settings
-Go into basic security settings on the left and change the channel to 11 (yes, I know this doesn't work for all but please read on) and apply
-Now back on the left side menu choose advanced security settings, enter 802.11b/g Mode
---Honestly, most people should need G only by now, but choose what you need here (avoid mixed) and apply
-Go back onto the left menu and try advanced wireless settings again but this time choose "Other Advanced Wireless Options" at the bottom
-Change MTU to "manual" and enter in "1492" in the field it provides and apply
-Now at the top right go into advanced settings
-Click on the link for "System settings"
-In here UNCHECK the "Enable Logging" and "Low Capacity Notification" options and apply
I don't think they would be able to tell you which version is being shipped, because I am sure the new routers are coming with the new firmware and the old they send out first.  But yeah, give that a shot and see if that does anything to help your wireless machines connect.  I am kind of curious if that will change anything.

Similar Messages

  • When trying to change ringtone I keep getting the error message file type not supported.

    I have downloaded some ringtones fro VZ Tones and when I go to make them the default it gives me the error message file type not supported.  If I go to my storage and try to look at pictures, it tells me the same thing.

        That's definitely odd CrystiDawn, and I understand it can be quite frustrating. Let's get to the bottomof this. What device make and model phone do you have? Did you receive a text message with a link to download the ringtones? If so, once downloaded, please go to all your Apps, locate "Files" and play the ringtone using the media player. You will have the option to set it as ringtone while playing and pressing the menu icon. Were the pictures taken from the phone or transferred using the USB cable?
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Error message "The currently attached accessory is not supported by this iPod" is shown when connected to my Zeppelin Air Dock.

    I have 2 iPods, one is a 60GB Classic formatted to Mac the other is a 80GB Classic formatted to Windows. When either is connected to my Zeppelin Air Dock, a message appears on the iPod saying "The currently attached accessory is not supported by this iPod"
    I have updated the firmware on the Zeppelin and have the latest updates on each of the iPods.
    The Zeppelin works fine and connects to the computer and laptop without issues.

    I'm having the same problem, it just started today. I've been running w/ the nike+ sensor and receive w/ my iPod nano for 6 months, logging 75 runs, so don't understand why I'm getting this error now.
    Can someone please reply w/ how to resolve this issue? I have Nike+ challenges coming up soon that I can't miss. Thanks!

  • In SharePoinr 2013. Unsupported Reporting Services Functionality The feature: "Power View" is not supported in this edition of Reporting Services.

    Hi,
    I am getting the below error which click "Create Power View Report" option in "Power Pivot Gallery"
    Unsupported Reporting Services Functionality
    The feature: "Power View" is not supported in this edition of Reporting Services.
    I have uploaded "Power Pivot" excel file in "Power Pivot Gallery".
    It is frustrating like anything. Can anyone help on it.
    SharePoint 2013. SQL Server 2012. I have enable all the service applications success in CA.
    Thanks in Advance.
    Poomani Sankaran

    Hi,
    Please try to download the SP1 Edition of the rsSharePoint.msi
    file and install it. You have to install the SP1 edition of RS if you are using SP 2013.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/2d2ecfae-b524-43f3-bf93-0bddfe904b75/the-feature-power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
    Best Regards
    Dennis Guo
    TechNet Community Support

  • When i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

    when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Writing files is not supported on this device (smart camera 1722)

    Hi,
    I have a smart camera NI 1722 and I want to save images that I aquire. I use the "IMAQ Write file 2.vi" and I always get this error: "Writing files is not supported on this device". 
    Is the smartcam really doesn't support to write images in a folder? I've tried to change the path (on the smartcam and on our server) but I always get the same error.
    I use LabVIEW Real-Time 8.5.1, LabVIEW 8.5.1, NI Vision 8.5 etc (all the lastest versions of LabVIEW).
    Thank you for helping me,
    Stephanie

    Hello
    If you already flattened the image, you can now save it on the hard disk of the smart camera.  To load the image, you will have to un-flatten with an image again.  See the attached document to see the block diagrams.
    I did it for a template in a pattern matching program and worked!!!
    Good Luck
    Santiago Orellana V.
    HighLights - National Instruments Ecuador
    Attachments:
    Grabacion y recuperacion de imagenes en smart camera.doc ‏28 KB

  • "The feature Power View is not supported in this edition of Reporting Services" after installation of November CU for SharePoint

    We had deployed Reporting Services / PowerPivot /Powerview for a customer and everything was tested and appeared to be working fine . However after installing the November CU we now get the following error :
    "The feature Power View is not supported in this edition of Reporting Services"
    Initially PowerPivot wasn't working either but that got resolved after re-installing the rssharepoint and sppowerpivot msi files. Has anyone faced this issue?

    Hi,
    According to your description, my understanding is that the PowerView not work after installing the November CU Updates.
    I check the November CU updates, it have no affects on the PowerView or PowerPivot.
    The reason for this issue may occur when the PowerPivot Service Application is not running after installing the CU updates.
    Here is a detailed article for your reference:
    http://support2.microsoft.com/default.aspx?scid=kb;EN-US;2889944
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

  • When trying to play videos I get the message "requested URL is not supported on this network" how do I fix this?

    I receive the error "requested URL is not supported on this network" when trying to play videos on my iPhone. Can you please advise how to fix this problem?

    Hi,
    You will need to re-instal iCal as an optional install from your OSX installer DVDs. Then run the Mac OS X 10.5.8 Combo Update.
    Best wishes

  • Firefox 4 unable to use on imac G5 ( without intel chips ), get messageYou can't open the application bcz it is not supported on this architecture.

    My iMac G5 without intel chips, Mac OS X 10.5.8.
    using Firefox 364 no problem at all.
    But unable to install Firefox 4 on it, prompt "You can't open the application because it is not supported on this architecture"

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    There is a third-party version of Firefox 4 that works on PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • What does "you cannot open the application because it is not supported on this architecture" mean?

    What does "you cannot open the application because it is not supported on this architecture" mean?

    well my mac lion (10.4.11) will run minecraft.jar, but runs very slow , i tried downloading minecraft.zip it showed the mc logo with a x on it, i tried opening it, and it said it cant open it because there is no application to open it, do i need a higher version of mac? mainly leopard or snow leopard? This is what it looks like

  • The attached iPod model is not supported by this application

    I just bought a 20G color iPod. I spoke w/ the Apple tech support & I needed service pack 2. I downloaded it. I didn't have a USB 2.0 port then I installed one. I downloaded the latest Apple updater software 2005-06-26 then I tried the even later version 2005-09-06. When I go into updater, it says it is "initializing" and then says "the attached iPod model is not supported by this application." Reformat and restore are both grayed out. iPod doesn't show up in iTunes and doesn't transfer my library. I just got back from the Apple Store and the suppossed "genius" said the iPod is fine and it is my computer. WHAT is wrong with my computer?

    Brad,
    you ought a little bit more descriptive! What Version of iTunes are you using? Check the software version of your iPod (if it even has one yet) under Settings-About. Your iTunes and iPod software have to be compatible. If you're running 4.9 you need 2005-06-26. Close iTunes and leave it alone. Deinstall all iPod related software, clean the registry if you want (I don't think this is so much necessary for the iPod software). Then install 2005-06-26 again on your computer first!! Don't connect the iPod. After having installed it, open the Updater, then connect. Before you do that and since you don't have any music on the iPod reset it to factory settings under Settings-Reset all settings. Or at least reset it with pushing Menue and the center knob at once. Many possibilities I know, but either one will work...after that it will remain seen by iTunes and you're a lucky guy (hopefully).
    Best regards
    Roman

  • The :pserver: access method is not supported by this port of CVS

    i receive the following error when trying to connect to cvs
    the :pserver: access method is not supported by this port of CVS

    i receive the following error when trying to connect to cvs
    the :pserver: access method is not supported by this port of CVS Use the CVS 1.11.2 from http://www.cvshome.org, sounds like you are using a version of cvs which (is maybe CVSNT) doesn't support pserver.
    Rob

  • "The attached ipod model is not supported by this applicatio

    HELP! I installed my ipod nano and it all worked fine, got a few songs on it. So i downloaded some more, ripped a CD i had and did nothing particularly life changing. Going back into i-tunes it all went a bit funny and came up with a message saying "Cannot read ipod please reset to factory settings" So i went into ipod updater (the version that was on the CD that came WITH the ipod) and was told "The attached ipod model is not supported by this application" so i went onto the apple website and downloaded the latest version of the ipod program, tried again and the same message appeared: "The attached ipod model is not supported by this application" any ideas?!?!?!

    Well let's assume you already have Ituenes 5.01 than if you can see the Nano as a mounted drive in My Computer I would recommend reformatting the Nano with FAT32 from there. Than try running Ipod updater again. Sorry I can't think of anything else right now, try searching around or see if someone comes to you on of your many forms. That's another reason not to double post those that are trying to help you don't know what else has already been suggested.

  • Oracle Business Intelligence is not supported on this Windows version

    Hi Guys,
    I uninstalled OBIEE 10.1.3.4.1 and OBIA 7.9.6.1 and after that i did disk cleanup from Start->Accessories->System Tools-> Disk Cleanup.
    And after that when i tried to Install OBIEE 10.1.3.4.1 i got the following error.
    Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
    But my machine is Windows XP x86 and I have installed OBIEE. I was surprised when i saw this error.
    In Run-> CMD when I type Systeminfo i get the following error.
    Loading Network Card Information...
    ERROR: Provider Load Failure.
    I would appreciate if any one of you can let me know what could be the problem.
    Thanks a lot!
    Edited by: user10511107 on Mar 14, 2010 9:22 PM

    Hi Daan,
    I belive we all shoud consider http://forums.oracle.com/forums/ann.jspa?annID=939
    I get upset to see people on this forum who answer the questions like *'use google'* or *'let me google it for you'* or *'use this forum filter'*
    I belive it is better to help them answer a better question or if you don't like the question ignore it.
    Hi user10511107,
    I belive your problem is with Windows not with BI, BI just can't get windows version,
    If you are on right version of windows go to MSDN and search for your error and how to fix it
    ERROR: Provider Load Failure.
    Regards
    Nicolae

  • What does the Error Message: "File format not supported" mean?

    When I first open an existing project, I get an Error Message: "File format not supported".   After a few seconds all the windows open up and I can continue to edit.  My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up?  All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate,  1920 x 1080.

    More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
    Also, are your files on an external drive?

Maybe you are looking for