The first DVD menu doesn't support "clicking" with the cursor

I just created a disc image of my iDVD project and I have found that when I run it using the DVD Player, I can't navigate the first DVD menu with the cursor. The only way I can move through it is by using the arrow keys and then pressing "return" or "enter."
When I preview my project in iDVD I don't have this problem. Any ideas as to what is going on here? Has this question been asked and addressed? I wasn't able to find any posts that outlined a similar problem...
Any help would be greatly appreciated.
Thanks,
Aaron

Has this question been asked and addressed? I wasn't able to find any posts that outlined a similar problem...
Any help would be greatly appreciated.
Let me know if any of these links are helpful:
http://discussions.apple.com/thread.jspa?messageID=5940413&#5940413
http://discussions.apple.com/thread.jspa?messageID=5575979&#5575979
http://discussions.apple.com/thread.jspa?messageID=5402707&#5402707
http://discussions.apple.com/thread.jspa?messageID=5550606&#5550606

Similar Messages

Purchased 2 iphone 5's. Both have cracked the screen in the first week. Never had this problem with the previous versions iphones being so fragile.

I purchased 2 iphone 5's. One for my husband and one for me. Both have cracked the screen in the first week. I even have a case on mine. Never had this problem with the previous versions iphones being so fragile. Has anyone else experienced this?

Tests by some of the web sites and magazines claim that the iPhone 5 is in fact more rugged than previous models. That doesn't obviate the possibility of an assembly defect that would make yours more susceptible to damage, but if you dropped or impacted them and they cracked, then your warranty will not apply and you'll have to pay for replacement, either the AppleCare+ "deductible", if you purchased AppleCare+ with your iPhone, or Apple's normal out-of-warranty replacement charge.
You can of course make an appointment at an Apple Store, explain the situation, and hope that there's something they can do for you. Don't count on it, though.
Regards.

I lost my iPhone 5s and purchased a new phone. A few days later I found the first phone. What can I do with the old 5s? How can I upgrade to a 6?

What do I do with the old phone and can I get an upgrade?
Thanks
Pete

You're gonna have to figure out how to call AppleCare & ask to talk to "Account Security". If your english is not good, then find someone to help you. Be prepared to prove ownership & the fact that you purchased this phone from an authorized source in the US. They "may" be able to help you.
Apple does not provide email support.

The PSE 10 process doesn't stop after closing the application. Why??

On Windows 7, the PSE 10 process doesn't stop when closing the application, therefore the PSE 10 app. will not restart once it is closed. The user must stop the process from task manager or reboot before PSE 10 can be restarted on a Windows 7 machine. The forum suggestion to double-click the exe (instead of the shortcut) as a solution, obviously isn't a solution and can't work. There are no updates to PSE 10 and the only access to any support is through this forum. There have been complaints about this on blogs all over the Internet. Why can't Adobe come up with a fix/update or if they have where is it posted?

First of all, there is no difference between the files on the disk and those downloaded as the trial. The only difference is that one comes with a serial number and the other does not. You can put your serial number into the trial version and it will then be activated. The only way the disk would behave differently is if there is some physical flaw (scratches, warping, etc). Usually such damage will cause the installation to fail, it's pretty difficult for such damage to modify the files in such a way that they still install but behave differently.
If you are dropping a file on the shortcut and the Photoshop Elements Editor is opening but the file is not, there could be a few different things going on there. Check your shortcut properties first: does it go to PhotoshopElementsEditor.exe or Photoshop Elements 10.0.exe? If the former, then there are probably some missing support files. If the latter, this is the Welcome Screen, which has likely been configured to launch the Editor automatically. However, you would be sending the file to the Welcome Screen, which doesn't do anything with the file. It is not capable of passing the file off to the Editor, only capable of launching it.
Also, double-clicking a shortcut is generally the exact same thing as double-clicking the file the shortcut points to, but you can add modifiers to shortcuts to make them behave differently.

DVD menu doesn't work on the finished DVD

Please, I need some help.
I am having problems with a DVD menu.
Several days ago I burned a DVD from the same project that I tried to export to DVD today, and I did not have any problems with DVD menu, but today, when I start to burn DVD it shows me a warning sign that tells a few DVD markers are closer than they are required, and after burning DVD the DVD menu doesn't show or work on the finished DVD. What am I doing wrong?
Robert

Look here: http://www.adobeforums.com/webx/.1dea22a5/

Authentication failed because Outlook doesn't support any of the available authentication methods.

When attempting to check and send email from my Mac via iCloud, I keep getting the error "Authentication failed because Outlook doesn't support any of the available authentication methods." I have change just about everything I can see available, but continue to get this message.
I am able to send email via iCloud using my .Me and .Mac adresses, and that tells me that it is not able to store "sent emails" on iCluud and will store them loaclly on my computer. I can handle this, but whem going to iCloud Web page haave nothing withing the "sent" mailbox.
Using OS 10.7.2, and Outlook 2011 version 14.1.3
Thanks in advance......

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods."

Upgraded my computer to 10.9.2 Mavericks and now my 2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods." Anybody know how to fix it? Thank you.

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

HT5628 When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

Go into your system preferences and click the startup disk icon then select your Mac HD.

Before the main DVD menu

Hi there,
is there any way to place a short movie (2-3 minutes) before the main DVD-Menu? With that I mean, when I put the DVD in the player, I would like it to start directly with a little intro - like in some movie, in always start with advertising or similar - and then I would like the main DVD-menu to come.
Is there anyway to do that with iDVD?
Thanks for any ideas and answers!
W2006

I believe you'd just drag and drop your QT movie to the autostart well while in map view. Try it.
Click Here
It's the very top box that you drag and drop any QT movie you'd like to start the presentation afterwhich it should return to the main menu. It looks very similar to iDvd6 also:
Message was edited by: SDMacuser

HT3205 I have 7 lights on my macbook. What does it mean when the first 5 light up when I click the button?

I have 7 lights on my macbook. What does it mean when the first 5 light up when I click the button?

Run an Apple Hardware Test (extended version):
http://support.apple.com/kb/ht1509
Ciao.

Pavillion TX 2510us tablet notebbook error #1005, while restoaring at 52% of the first dvd.

Hi everyone! I'm from chile and I have a pavillion TX2510us notebook tablet pc. I'm trying to restore my TX 2510us tablet notebook pc from just created dvd's but twuce I have received the same error #1005, while at 52% of the first dvd. Can anybody help? Thanks in advance!!!

I would suggest either ordering recovery discs from HP or attempt to recover from the F11 recovery manager.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

The first DVD menu doesn't support "clicking" with the cursor

Similar Messages

Maybe you are looking for