The first generation mac pro shuts down after start up suddenly

I have had mac pro since 2006 and have used it so many times without any problems starting up/booting successfully. Recently it was not booting well and i done pram clearance and worked for a while. Once after going into the desktop the screen just froze and i could hear a repeatitive clicking sound from the computer. I was able to shut down and did not use the computer for some time. i have tried to switch it on today and it goes through the normal dong sound and apple logo appears plus a grey bar underneath which fills to a bit and then there is a change in sound in the computer as if something coming to off and then there is the same repeated sound of faint clicking and the computer shuts down. can please anyone help me how to sort the problem out?

Raj Karia wrote:
how do i carry this operation out?
Your machine info has changed from 10.6 to 10.3. No MBP ever shipped with 10.3, so I'm including directions for 10.6:
Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications>Utilities>Disk Utility and run Repair Permissions.
how do i open up the disk drive?
Not sure what you mean by this.

Similar Messages

  • Nvidia 8800GT video card in the First Generation Mac Pro

    This message is a bit of advice if you install the new Nvidia 8800GT video card in the first generation Mac Pro. The advice is keep your old video card. The old video card will be needed if you ever need to reinstall the OS X operating system. This new card needs the video drivers (kernel extensions) that are in OS X leopard 10.5.2 or later. With this video card installed, both the OS X original installation disk that came with this computer and the OS X leopard upgrade disks will cause a kernel panic when booted up. This is because they do not contain the kernel extensions needed for this video card. There is a question. Does anyone know how to create and burn a reinstallation DVD with OS X leopard version 10.5.2 on it? This would help solve this reinstallation problem

    this is a advisory to whom it may concern
    here my latest reply from a apple product specialist how was very good and helpful but only
    give me this to my upgrade answer !
    i want to upgrade my graphic card to 8800 and run tiger on my 1st gen macpro
    here it goes:
    "This article indicates what cards are supported in what machines: http://docs.info.apple.com/article.html?artnum=305346
    Your Mac Pro is the first generation, and did not have PCI-Express 2.0 slot like the current generation does have.
    Unfortunately, we don't foresee the release of any drivers for the 10.4 OS on this machine.
    In regards to the second issue, we also don't support two video cards in two slots, using a different one for eash OS, there is no supported way to do this."
    "Unfortunately, the latest version of the Mac Pro will not run Tiger, as it was manufactured after the release of Leopard, therefore the drivers for the machines hardware will not be available on Tiger."
    hope thats cleared some ones Q.
    kindly
    S.

  • Mac Pro shuts down after setting up RAID (HELP!)

    So, I recently purchased a rev 1 Mac Pro and decided to setup a RAID using 4 750gb WD drives. I am not using a RAID card, simply using Disk Utility.
    I first combined drives in bays 1 and 2 (striped) and then combined drives in bays 3 and 4 (striped) to give me essentially two 1.5tb drives.
    I then created a mirrored RAID using the two striped raids so that I would have the speed of a striped RAID with the safety of a mirrored RAID.
    Once I did this, it showed up as one hard disk on my desktop (I was booting with an external). I then cloned my external drive to the new RAID disk on the desktop, and did so successfully.
    However, now when I try to boot from the RAID, it chimes, the Apple appears, and then the Mac Pro shuts down. I tried holding down option and all 4 drives appear. I tried booting from a different drive, and the same thing happens. I should also note that the firmware bar flashes on the screen before shutting down (looks like a really long pill).
    Any ideas? Does it sound like I did something wrong? I hate to start from scratch, as it takes all night to clone my external drive to the Mac Pro. Thanks for any help.

    Hello, Hatter. Thanks so much for the information. I went with the information from the Macworld article (I believe) "RAIDing the Mac Pro" and according to it this setup was supposedly a great idea. But, yes, it's not working out so perhaps not in this case.
    So, I have four brand new 750gb Caviar Black drives installed. If I understand you correctly, I should stripe 3 disks together, then use a 4th as backup (using Time Machine?). So, if I use the drives I have, I'll have a striped configuration that gives me 2.25TB of space, and a 750gb hard drive for backup. That technically would work for now, as I have about 660gb of data on the system (although in the future I'd need to swap out that 4th drive for a 2TB.
    So, if that is what you're suggesting, would you mind telling me exactly how I do that? I think I understand, but just want to make sure as this is my first Mac Pro and first time setting up a RAID. Thank you so much for your response.
    p.s.: I'm guessing I'll need to do a fresh start and clone my external drive all over again, correct?

  • My Mac book pro shuts down after starting

    My Mac book pro shuts down after a few second. I have to press the start button multiple time before uploading

    MacBook Pro (17 -inch, Mid 2009) OS X Yosemite Version 10.10.2
    Processor 2.8 GHz Intel Core 2 Duo
    Memory 8 GB 1067 MHz DDR3
    Startup Disk Macintosh HD
    Graphics NVIDIA GeForce 9400M 256 MB
    Serial Number W8******8YB
    Disk Utility Message:
    Repairing permission for "Macintosh HD"
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOSARDAge nt" has been modifiedand wil not be repaired
    Group differs on "Library/Printers/InstallerPrinters.plist";should be 80; group is 0.
    Permission differs on "Library/Printers/InstalledPrinters.plist" should be -rw-rw-rw ; tey are -rw-r---r--
    Repaired "Library/Printers/InstalledPrinters.plist"
    Group differs on " Library/Preferences/com.apple.alf.plist" should be 80; group is 0.
    Repaired "Library/Prefernces/com.apple.alf.plist"
    User differs on "private/var/db/displaypolicyd"; should be 0; user is 244
    Group differs on "private/var/db/dispaypolicyd:; should be 0 group is 244
    Repaired "private/var/db/displaypolicyd"
    Permission repair complete
    I was not able to fix the problem,
    TinTin 15
    <Personal Information Edited by Host>

  • Mac Pro Shuts Down After Boot.

    Hey guys I have a 2008 Mac Pro. I went to turn it on today and It started like normal up to the Apple logo screen then shuts off. I've looked around on here for a while and cannot find any posts that have the same problem that I am having. Any ideas????

    Have you done any maintance on your mac pro lately?
    It might be clogged with dust and Cooling compound is likely dry as old bubbelgum.
    Try to check your internals of the mac if its clean, disassemble the heatsinks, both on northbridge, CPU and, GPU. Also remove the PSU cage to look for dust at/inside the PSU, if so disassemble the PSU and get it clean. Don't just stick a vacuum cleaner at the back.
    check this guide how to disassemble the CPU heatsinks
    http://www.youtube.com/watch?v=xOF435jCg8E
    If it don't help, call apple support or go to your nearest Apple store for repair service.

  • Early 2008 Mac Pro shut downs during start up and restarts to full power fans, Help!

    I have searched through all the forums all day and can't find anyone with the exact same problem.
    It doesn't matter if I'm booting up to Windows 7 (boot camp) or OS X.The computer will start booting... and anywhere between the "apple tone" and the login screen it will shut off all the displays, shut down the HDDs, shut down the GPU fan and spool up the main fans to 100%.
    I have reset the SMC and PRAM. All the diagnostic LEDs are displaying correctly (no overheating, GPU lights on). No RAM LEDs are lit up. The white LED on the front remains lit constantly. It won't stay running long enough for me to run the diagnostic disk.
    I first thought it was a GPU (Nvidia 8800) issue, but after removing it and booting up with no video card... the outcome was the same. I'm leaning towards a PSU failure, but I haven't found anything to back up my theory. I'm hoping it's not a logic board failure... I would think there would be LEDs lighting up or something more definitive.
    Can anyone help?!?!

    There are multiple threads and reports of issues with Icy Dock - there is one on Amazon that lines up properly.
    The drive sled length of 2009-2012 Mac Pro are longer. Maybe OWC needs to be clearer.
    You'e right half-way and maybe some corrupt plist or interferring process you have, or even another hardware item or cable - external - even printer drivers or something that refuses or does not like sleep. Controller card?
    All around I'd have to vote for Samsung 830 model. Then Intel 520. Crucial is out with x4 now (Or is it "V"?)
    SSD firmware continues to be trouble. Even May-June the SandForce firmware had major issue and reason to hold off any using theirs. Reason to see if yours needed to be updated. Someone last week with m4 found they had old firmware and needed to update it.

  • Does the first generation Mac Pro Recognise DVD-RAM

    i entered a blank dvd-ram into me MacPro and couldn't write in it or erase it. when i go to the get info, it tells me that my disk is read only.
    I have the basic SuperDrive that comes with the system.
    Any help or suggestions will help a lot, since i have many dvd-rams from my old vhs/dvd recorder combo.

    Check this - http://docs.info.apple.com/article.html?artnum=42718
    It will show you how to find out what formats your drive supports...although it does say:
    "While some DVD-RAM discs can be removed from the cartridge, those discs cannot be read by or written to using the SuperDrive" so you might be out of luck.

  • HT201342 I have a PC WindowVistaoperating window 7 , I have  the first generation iPad  unable to down load started out with me account.  I got. iPhone 4S  updated to iCloud. Things worn't working to good. My PC ,iPad work off iOS 5,my iPhone works off  i

    I keep getting my apples cloud has a problem wants to close. It is not wanting to sync with my iCloud I believe because I use iOS 6.01 on my iPhone every thing else uses iOS 5 what can I do to fix this?

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • My Mac book pro shut down after getting a low battery message, and now or won't start at all. It's plugged in now and nothing, no fan, no chime when I hold down the power button

    My Mac book pro shut down after getting a low battery message and now it won't start. Any ideas?

    Hey Citrinesky,
    Thanks for the question. I understand your MacBook Pro is not responding. The following resource may provide a solution:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thanks,
    Matt M.

  • First Generation Mac Pro (in the shop please help)

    My first generation Mac Pro is in the shop and I am hoping one of the experts on the list can give me a good reason to have them go beyond what they would normally do. Effectively it is six months out of AppleCare Warranty but I was told that if there was a problem related to an earlier fix they would take care of it.
    The story:
    I bought this machine with two 500 GB hard drives with one to run XP on BootCamp. I only intended to run XP software on this machine and only went back to mac due to the "do everything on your Mac that you could do on you PC" campaign. The other drive was for /eventual/ use of OSX.
    About a year and a half in I bought two extra gigs of RAM to boost XP 3D software performance. I ran this for about a couple of weeks did not see much change and tried to verify that it was seeing the 4 GB. It was seeing two. I spend a couple of weeks sorting this out with Crucial (who said it was a "special issue") and then I got through to Apple and eventually sent the 2GB back.
    Later I found out from a technical forum that I could "flip a switch" and get XP to recognize an extra gig of RAM via some technical settings. I bought the two GB of RAM again, installed it, and tried to run the software switch. After /endless/ go rounds with MAC I was told that the MacPro will do "anything that a PC will do" (which I tried to indicate was not the case) and that I basically had to consult the Forums. At that point I got in touch with Cupertino was told that this was a Firmware issue that could not be fixed.
    I was told by the tech that I should just wait until Windows 7 comes out.
    So I waited. About eight months ago I set down to upgrade the Office with a new MacBookPro with Windows 7 and I went to upgrade the MacPro with Windows 7. No go. I looked this up on a technical bulletin that described "Late 2006" Mac Pros as not running WIndows 7 (mine is 2007) and spent more time troubleshooting this.
    Again after getting through to Cupertino, and having them consult the serial number I am told that this machine will not run Windows 7. Huh? I am stuck with a computer that I bought for apparent durability and endless RAM expansion and I am stuck with only 2GB or RAM which came out of the gate from the factory?
    It is now in the shop for an apparent dead power source. It was previously in the shop for a weird, hairy and extremely difficult to troubleshoot (again more time) issue with the display. First it was thought to be the display, then the mother board, then something was loose, then it was the display, then we replaced the Video Card, and eventually we settled on a bad mini DVI converted they had to give me because they busted my Display when it was in for fix and had to give me another one (not complaining). After this was fixed the computer had to go in for a bad CD/DVD drive.
    The question is - can I argue in any way that there is something defective with this machine and base the new problem on an old one?
    Longer term, I am thinking about trying to sell it for one that will run Windows 7.
    Do these things last as long as they /look/ like they should last over the long haul?
    Thanks for any help,
    Jonathan

    Hi. Look.
    I do have an IT guy but I have to first be able to explain the problem to him and to do this I have to understand it myself. [BTW let's also not go down the road where I get insulted about my perceived lack of technical skills. This gets very old very quick and if you knew what I did for a living you would feel a little silly talking to me about "a couple of latches" etc. etc.)
    I /also/ have to figure out what questions to ask and attempt to get some minimum amount of support from Apple. Even the Tech Supervisor at the Apple store told me two weeks ago he remembered how hard it was to get good information on this issue. The guy /works/ for Apple and he's probably /does/ have some degree in computer science.
    The point is I don't have the TIME to address this issue and this will be the sixth or seventh time I have looked into it. I think this machine is not doing what it was advertised to do and I think in the past Apple would have done something for the consumer about it. It doesn't make sense for me to not say so - and it doesn't make sense for us to argue about this. The only reason something is not being done is because there is a very small class of people who are having this problem. If there were a larger class there would be a ton of comical takes on the PC Guy Ads on YouTube and they'd /have/ to do something just for the sake of the bad PR.
    Perhaps I can ask you to post the links to the procedure for doing this if I get the time and decide it is worth it? Can you also clarify if this applies to both Win 64 and Win 32?
    Thanks.

  • My MAC Pro shuts down when the battery still have 50 minutes life.

    My MAC Pro shuts down when the battery still has 52 minutes life without any warning. Does anyone have this problem? BTW, it is less than one year old.

    You must have a MacBookPro, right? MacPro's are big desktop models.
    Try the MacBookPro battery forum or their Usage forum.
    DALE

  • Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?

    Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?

    Try this to start:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • On starting up, my macbook pro shuts down after 25 seconds of booting up.

    Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Mac Pro Shuts down

    Hi.
    My Mac pro shuts down unexpectedly after about three days. And I don't know why. It never happens when I'm working with the computer. In pref it is set to never shut down or rest and to turn on automatically after power failure. But this dosen't seem to work either.
    I made a dump from system log or what it is called in english. Maybe someone smart can figure out what seems to be the problem by reading the things happening before the shut down?
    I have a FTP server on the mac so I would like it to be up and running all the time.
    OS is 10.9.5
    regards
    < Personal Information Edited By Host >

    new log if anyone have any ideas what seems to be the problem.

  • Mac mini shuts down after 10 seconds..

    At first today, the CDs and discs kept automatically ejecting and wouldn't read (obviously). So I keep putting them back in hoping it would read or hold something. Then I restarted and the Mac Mini shuts down after 10 seconds of the seeing the desktop. Did I fry it? I did hear a weird sizzling when I put my hand on top of the mini. And is this under any warranty - I bought it Feb. 07? Any help would be greatly appreciated.

    Any thoughts on that?
    One or two come to mind, not least that if the unit is under warranty now (as it clearly is) and they aren't taking this fault seriously, then buying AppleCare so it remains under warranty longer isn't the right solution - having them examine it and resolve the problem is.
    There's no doubt at all that in the event there is a system with a suspected fault, extending the warranty long enough that the system ceases to function and can be repaired is a good thing, but it shouldn't be necessary to go to that extreme in order to get a problem resolved now!
    I would simply take this elsewhere and have it looked at. While odd noises are sometimes hard to hear in an environment where there are people and other activities going on, and thus it is reasonable to expect diagnosis of them to prove difficult, a system that shuts down of its own accord after a few seconds is clearly not working correctly. To be sure, if it is overheating, then testing it when it's cold is likely to miss the problem, but the description of the fault from the user ought to give enough clues to put the system on test long enough to see what happens when it warms up. If the fault can't then be replicated with a system that is at normal running temperature and under load, then giving it a clean bill of health is reasonable.
    Thus, in your place I would ask them if they did, in fact, test it in that way. Alternatively, write a description of the fault, specifically identifying the premature shutdowns and the circumstances in which they happen (if they still do) and the noises and the circumstances in which they occur (if they still do) and take the system and description to an approved service provider and let them look at it.
    If the shutdowns are no longer occurring, and the noise is absent, then whether you buy AppleCare or not is really a matter of how confident you are that the problem has gone. If you have doubts that the system is running correctly, AppleCare is expensive but at least extends the warranty sufficiently that you can stop worrying too much. Alternatively, if the problem(s) still persist, rather than AppleCare, have the system examined and repaired right now.

Maybe you are looking for