The First iTunes Problem I Ever Had...

I love iTunes and iTunes 7 is the best media player in the history of any media players. I recently had problems where something must've iterphered with it and mixed the settings all up so now even after 2 system restores and uninsalling and reinstalling it about 100 billion times I still don't know how to fix it so if theres anyone out there who can help me please do this is the message box that comes up:
I thank whoever can help me sincerely...

Error -200 is basicly caused by old and/or incorrectly installed quicktime files.
Since you did a restore tho you need to do the extra step of going to "Windows update" site and updating windows....then goto the PC makers site and install ALL updates for your PC model.
After that goto (In windows) control panel>add and remove and uninstall itunes AND quicktime.
Go here and roll down to "Clean up iTunes installer files on the computer" (Don't download or install yet itunes) http://docs.info.apple.com/article.html?artnum=93976
Extra Measure Scan the system for malware with your adware/spyware program or ewido http://www.ewido.com Sometimes malware "Fudges" with installs of itunes.
Now disable antivirus and security programs then goto apple.com and download/install itunes again

Similar Messages

  • Hello this is the first time I have ever had a problem. I am trying to down load a movie and it keeps giving me error -50. I have signed out and back in and deleated the download and tryed again and still will not download.

    Hello this is the first time I have ever had a problem. I am trying to down load a movie and it keeps giving me error -50. I have signed out and back in and deleated the download and tryed again and still will not download.

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT201303 I have rented 2 movies the past 9 days and they won't transfer to my iPad - error message says that they cannot be played on my iPad.  I haven't watched either movie and this is the first time I have ever had this happen.

    I have rented 2 movies the past 9 days and they won't transfer to my iPad (first generation).  Get the same error message that says they cannot be played on my iPad.  I haven't watched either movie and this is the first time I have ever had this happen after several successful movie rentals and transfers.

    When you have a query please post the feed URL rather than its contents. For the record, yours is at
    http://www.honywoodschool.com/podcast/44986
    I don't have an iPad to test this, so I can only refer you to Apple's Podcast Tech Specs page:
    http://www.apple.com/itunes/podcasts/specs.html#formattingvideo
    This says that the maximum video size for an iPad is 1024x768 - your latest episode is 1280x720.
    Slightly confusingly, it also says
    'iPad & Apple TV can play the following video formats:
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format'
    which suggests that mp4 files are even more limited.
    Incidentally your feed gives this URL for the media file:
    http://www.honywoodschool.com/user/59/133934.mp4
    However when downloaded this produces a file called 'howtosetupappeid.mp4' so soe sort of redirect appears to be in place, and these can sometimes cause trouble. It's better to link directly to the file - it's possible that the iPad doesn't handle the redirect.
    That's all I can suggest: if it still doesn't cover the problem I can only refer you to the iPad forum where someone may be able to actually try your podcast and offer a comment.

  • F.F. keeps telling me i need an ActiveX Plug-in but i can not find one for 3.5.11. This is the first time i have ever had a problem and totally lost here...please help. Jared

    I was going to add some new ringtones to my cell and in trying to listen to the samples i keep getting the Firefox needs to an ActiveX Plug-in would i like to be directed to where it is but nothing there matches....
    == This happened ==
    Just once or twice
    == Every time i have tried to go to site to review ring tones...

    Firefox, and most other browsers except IE, does not use ActiveX. See [[ActiveX]]
    You can try this add-on to see if it will allow you to listen to the ring tones by using IE's rendering engine in a Firefox tab:
    https://addons.mozilla.org/en-US/firefox/addon/92382/
    Note that the support for your version of Firefox is scheduled to end in August 2010 (see info at top of this page: https://www.mozilla.com/en-US/firefox/all-older.html . You may want to consider upgrading to the more current version: http://www.mozilla.com/en-US/firefox/all.html
    Also see:
    http://support.mozilla.com/en-US/kb/Upgrading+to+Firefox+3.6#What_s_new_in_Firefox_3_6_
    http://support.mozilla.com/en-US/kb/Updating+Firefox
    http://support.mozilla.com/en-US/kb/Installing+Firefox
    https://support.mozilla.com/en-US/kb/Custom+installation+of+Firefox+on+Windows
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.19; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.~~red:0 r32~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -''<u>In Windows,</u>'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -''<u>In Windows,</u>'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, <u>'''but'''</u> do look at the two bulleted items at the bottom "'''<u>NOTE for IE:</u>'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • In the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?

    in the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?

    palkia wrote:
    in last 4 days, i been using the new ip4 to take important photos and creating new contact.my new ip4 never snyc to itunes
    There's your problem right there... ^
    Whatever you did prior to plugging it in and answering yes to start the restore is gone forever.

  • I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

    I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

    Hello dwb,
    Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
    Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
    Thank you again for your advice,
    Regard,
    Beauty of Bath

  • TS1967 My computer failed and the main drive had to be formatted but all my music was on a separate internal hard drive. So I downloaded the latest iTunes , problem is it has found all my songs but seems to not recognize half of the album data, half of th

    My computer failed and the main drive had to be formatted but all my music was on a separate internal hard drive. So I downloaded the latest iTunes , problem is it has found all my songs but seems to not recognize half of the album data, half of the artists, all of the dates and all ratings data.
    I had a large part of it backed up on DVD's but it does not want to recognise them either?
    Any tips?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

    I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

    Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
    I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
    You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
    In fact there's a new one for HP at the top of the list just now.
    You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

  • Recently I downloaded photos from an sd card. When the download was complete all photos were loaded in a random fashion completely out of order.This is the first time it has ever happened this way. downloaded same card to iPhoto and all photos were in ord

    Recently I downloaded photos from an sd card. When the download was complete all photos were loaded in a random fashion completely out of order.This is the first time it has ever happened this way. downloaded same card to iPhoto and all photos were in order. Help needed. Am working on a job that needs immediate attention and HDR images out of order are impossible to deal with.

    Thanks for your help. The out of numerical order comes before the actual import begins. It happens when first uploaded to Lightroom and prior selection of of photos to imported to the catalog.

  • Trying to open Premiere elements 12 for the first time even though I had it loaded for a while.  It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct).  Any suggestions?

    Trying to open Premiere elements 12 for the first time even though I had it loaded for a while.  It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct).  Any suggestions?

    First we need to check , whether the LAN settings is set to detect settings Automatically or not.
    Follow below steps .
    1)Open Control Panel and then click on the option "Network and Internet" .
    2)Click on Internet options, click on 'Connections' tab.
    3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
    4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
    5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
    Then launch Premiere Elements 12 and try to sign in.
    If the settings were already set like that or you face same issue after signing in , let me know

  • When I start iPhoto it says the library needs to be updated and when I try to do that it says that the program is in use or unreadable. This is the the first time I have ever launched it. What do I do?

    When I start iPhoto it says the library needs to be updated and when I try to do that it says that the program is in use or unreadable. This is the the first time I have ever launched it. What do I do? It keeps going around in circles. I have tried re-starting the computer and re-launching the program holding down the option-command keys. Neither helped.

    What version of iPhoto are you using?
    This is the the first time I have ever launched it.
    Does that mean there are no photos in the library? If so move it to the Trash bin in the Dock and launch iPhoto again.
    If there are photos in the library do the following:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • I recently updated a friends iPhone 3 to I cloud , however some contacts have disappeared. These seem to be the ones that were added onto her phone and not her sim. As I have done a sim import. This is the first time she has ever done a back up and sync.

    I recently updated a friends iPhone 3 to I cloud , however some contacts have disappeared. These seem to be the ones that were added onto her phone and not her sim. As I have done a sim import. This is the first time she has ever done a back up and sync.

    This information will explain it:
                 http://support.apple.com/kb/HT1495
    Hope this helps

  • Ever since I downloaded the latest itunes software I've had nothing but problems. I lost all my information. I am in the process of redownloading all itunes university stuff. Now as it is downloading the program is freezing. What can i do?

    Upon doiwnloading the latest itunes I've noticed that my downloads stall in the same place. I have been stuck in the same loop for hours no matter what I do. I think that ome or a couple of downloads have me stuck because I keep goihg back to the same download. Can someone help me figure out how to delete or get past these items so that I can ffinish the rest of my download?  thanks for your help.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • When i send an imessage to another person with imessage, my husband also receives the message, even though it was not sent to him.   We have always been on the same itunes account and not had this problem, however, when i added the ipad, this started.

    When I send an imessage on my ipad to someone, my husband also gets the message, even though he was not selected as a receipient.  This just started when I got my ipad and sent a message for the first time.  As a side note, my daughter received an itouch and both my husband and i were getting all messages she sent, no matter which one of us they were sent to.  I turned her imessage off.  We have all of our devices under the same itunes account so that we can share all music and apps.  How can we get around this?  I do not want him receiving all imessages that I send, this will get very annoying to him.

    You can have a separate AppleID only for iMessage and keep using the other one for iTunes.
    Just change the AppleID used for iMessage in Settings > Messages > Receive At

  • This is the first time this has ever happened but I plug in any device iPod, iPhone and the computer opens up a found new hardware wizard. I can't sync any of my devices and I'm not happy. Any helpers?

    I can't connect any of my devices to my iTunes. Anytime I plug one of them into my computer I get a new hardware wizard window that pops up and I can seem to load anything from an iPod or iPhone if I run the wizard. Any helpers? I've been using iTunes on this computer for a very long time and this is the first time that this wizard has shown up ever. Please help.

    I have replied some one with the same problem.
    If your contacts saved in the SIM, you can import them from SIM. Please see this help.
    http://support.apple.com/kb/HT4994
    If not, you may use a third tool to recover your lost contacts.
    http://easy-iphone-recovery.blogspot.com/iphone-recovery-resource.html

Maybe you are looking for

  • New ipod touch 4th generation trouble

    Do i need to sync with iTunes before using it ? I try turning it on and I get the itunes + usb symbol, then the ipod shuts off. I'm used to my iphone, never had an ipod touch before. Just got it yesterday and charged it up.

  • My ipad2 maybe has crashed; all is have is a swirling apple icon on screen

    Help, today I synced the ipad 2. It  said there was new software so I insalled it. I got an error message. Can't remember what the number was. Now my ipad seems to have crashed. All i get iis the apple icon with a little swirl at the bottom. I cannot

  • Pages is not compatible on my ipad??

    I started downloading pages for my ipad, the app was slow in downloading than stalled near the completion. I got charged by the app store $9.99 and it doesn't work. when i try to re-instal it it saids pages is not compatible with my ipad...... Now wh

  • About oracle b2b installation.

    Hi Gurus, Can you send me some blog to guide me step by step to build Oracle b2b SOA application. Please clarify:Do i need to install B2B document editor soft(CD 1of 1,CD 1 of 2,CD 1 of 3) or Installation of CD 1 of 1 is sufficient for b2b document e

  • Forms Documentation link not present

    Hi, I went through the oracle forms 6i documentation.But the links specified in that was not working. Pls help. rgds, prasanth