The "Fix_Admin709.exe" patch and the Distiller - which version?

Hey all,
I have an Admin Installation Point patched to 7.0.9 and just recently read about the possible problem with the Distiller being downgraded in the patch process.
I made a test install from my AIP and the Distiller said version 7.0.7.
Then I uninstalled Acrobat completely, patched the AIP with the Fix_Admin709.exe and reinstalled.
Now, my Distiller still says it is 7.0.7. The kb article mentions the possible downgrade to version 7.0.5, but it doesn't say from which version.
So do I have now the latest version on my AIP?
thanks for any help!
regards,
k

The latest 9.0.x version is not compatible with your os.
see :[http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ Firefox 9 System Requirements]
Firefox 4 versions and later do not run on a PowerPC Mac and require '''at least OS X 10.5''' and an Intel Mac.
'''The latest supported version for your os is 3.6.25''' , your can download from here:
http://www.mozilla.org/en-US/firefox/all-older.html
see : [http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Similar Messages

Which driver and find out which version i currently have(driv

I recently bought F.E.A.R. for the pc and are having trouble with the sound in the game i.e. there is none. It was recommended to me to update my sound drivers, i don't wish to have a load of unnecessary software on my pc all i want it the drivers to make my Audigy 2 ZS to function as it should do. Could someone please advise from the below page what i need to download also could someone tell me how to find out which driver version i currently have for my Audigy 2 ZS card, thanks for any and all info you can supply.
I have used Upload'r to shorten the url because when the full url was posted it stretched everything.
http://url.uploadr.com/93c

Not at all, but it is New Year and still the holiday season for a lot of people, so there are probably less folks around than usual.
The latest full/final driver is:
<TABLE cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD vAlign=top align=right>2. </TD>
<TD height=5>Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55 (6.34 MB) </TD></TR></TBODY></TABLE>
Or, if you want a newer driver and don't mind installing a beta driver, you can use this one:
<TABLE cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD vAlign=top align=right>. </TD>
<TD height=5>Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002 (24.99 MB) </TD></TR></TBODY></TABLE>
Cat

Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?

I have Photoshop Elements 9 and use a Nikon D5100. I have downloaded camera raw 6.5 but cannot download photos to it. Does camera raw start automatically or do I have to manual start it?

That did I, thanks.
99jon <[email protected]> wrote:
99jon created the discussion
"Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?"
To view the discussion, visit: https://forums.adobe.com/message/7178756#7178756
>

How do I choose which version of Acrobat will be updated?

I have a Mac Pro with one hard drive dedicated to nightly clone backups of my main drive. When the Adobe Acrobat Updater tells me that an update "to version 11.0.02 is available. Do you want to install it now?" How can know and/or choose which version it will update?
Because the cloned backups are stable in their environments, I only want to update the one on my main drive.
Thank you.

Help > About Firefox
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 Firefox/3.6.18 ( ) = '''3.6.18''' - but that '''( )''' doesn't belong there and Quickbooks Online might be misreading your UserAgent as a result of that ( ) being there.
Try resetting your UserAgent string. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter = '''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. 
Then restart Firefox

Which version should I upgrade to? - 5.7/6.7 or 6.0?

Hi,
For the first time, IronPort currently has two WSA releases available for preview*. As there is no upgrade path available between those releases, this is a fork in the release path.
This obviously raises the question which version you should upgrade to. As I've seen some discussion around this in other posts and as this will become even more important once we hit general availability, I'll try to shed some light on this here.
So, which version is right for you?
* The two releases have a different focus and feature set:
Marconi (5.7 on the WSA, 6.7 on the SMA) introduces Centralized Policy Management and Delegated Administration of your Web Security Appliances via a Security Management Appliance (M-Series).
* Aurora (6.0) introduces native FTP, Data Loss Prevention / IronPort Data Security, support for AD 2008 and other authentication and policy enhancements.
Depending on your needs, one of them will be more appealing than the other. For now, you will have to decide which feature set you want to use in the short term until we release a version of AsyncOS for Web / Management that combines both feature sets.
Important facts to keep in mind:
* There is no upgrade path from 5.7 to 6.0 or vice versa on the WSA. Once you decide to use the functionality of one of the releases, you will only be able to use the features of the other release after an upgrade to AsyncOS for Web 6.3 and AsyncOS for Management 6.7.3 which is scheduled for Q4 2009.
* ICCM v1 is no longer available on AsyncOS for Management 6.7 so if you want to manage your Web Security Appliances via ICCM v1 do not upgrade your SMA to 6.7.
* AsyncOS 6.7 for Management supports Centralized Tracking / Reporting for your Email Security Appliances running AsyncOS 6.5 for Email or newer only. Please ensure that your Email Security Appliances run 6.5 or newer or upgrade accordingly if you want to use them with your SMA.
* 'preview' means that the release is not generally available yet (slow roll-out) but can be provisioned to anybody interested in the new features or fixes available in the new release.

You should be able to just tell your client to ftp directly to the proxy and then give the appropriate FTP info, such as the actual FTP server to connect to.
I'm pretty sure that the exact details are in the User Guide. I'll check the guide shortly.
If you are doing authentication with FTP proxy, you will have to enter your credentials in the special format that is specified in the FTP configuration.

App Files Saved as XML and Working with New Versions

We work with app data in the form of array of large clusters and use LV Anything to XML conversion VIs to save to disk.
The problem is when new app versions are developed and changes are made to the cluster format; we want the customer to be able to open the old version saved XML file format.
Usually the saved cluster (in XML) has be changed by adding/removing a field or even changing the options of a ring control for example.
The app name and version is stored in the XML.
Question: Is there a way of easily working with XML file formats with slightly different fields?
In the past we have worked with the raw XML text by searching for fields which are different and modifying them accordingly so they are accepted by the new file format.
Any tips would be greatly appreciated.

battler. wrote:
I have written a software name and version cluster to XML. How do you read the version field in the XML? Do you use string search? Is there a better way?
Yes, I use String Search (because it is near the beginning of the XML string). Depending on your XML "flavor", you should be able to uniquely-identify the Version information.
I'm interested in how best to work with XML. It seems cumbersome and prone to error to use string functions. Is there a way or best practice of reading the XML fields directly without converting to cluster?
XML is, after all, text with specific "tag" information, also text, identifying it. String functions are pretty much "the way to go", but except in rare circumstances, you shouldn't necessarily "roll your own", but should try to use the utilities that come with your XML package that "know" how to do the mapping between the XML representation of a LabVIEW variable (and its value) and the Variable itself.
Can you elaborate on these "mapping" and "reading/conversion" routines you're using? How do they work and what functions do they use?
An excellent question. There are at least three XML packages out there for LabVIEW -- the "native" LabVIEW package that NI provides, EasyXML from JKI Software (distributed using VIPM), and GXML, also on the LabVIEW Package network. I'm afraid that I'm slightly "abusing" XML, and have made some modifications to how I use EasyXML and GXML.
If you simply view an XML file in a "smart" editor, you'll see a series of text lines with Begin/End tags (like HTML). Depending on the XML "flavor", embedded between the tags are data that describe the LabVIEW variable type (e.g. Dbl, Cluster, Array, etc.) and also the value(s) of the Variable. The "ReadXML" (or similarly-named) function takes this description and (usually) returns a Variant that you can "turn into" the chosen variable (because you know the data type). [You may need to tell the Reader, in advance, the type of LabVIEW variable to expect so that it "knows when to stop reading"].
As to how they work, they just do String pattern matching and processing, usually of a pretty sophisticated level, but then you don't have to do the hard work yourself!
Why do you use Private Project library? Is your project based on OO?
The reason I used a Project Library with the "messy details" in the Private parts has nothing to do with OO, but rather with "data hiding". I actually developed this for my data processing routines. I had a set of routines that collected and analyzed the data (about 700 VIs). Let's call this Project "Version 1".
For Version 2, I basically added a dozen variables to the main Data Cluster (having over a hundred elements) that characterized the response. As this Cluster was in a Type Def, I didn't have to change my code very much to accomodate this new data format, so most of my VIs kept the same name, but were "different" because the underlying TypeDefs were different.
So I have a Version 1 program that can analyze Version 1 data, and a Version 2 program for Version 2 data. What I want is a Version-independent program that can look at the data, and then call for Version 1 or Version 2 analysis. By burying the Version 1 and Version 2 code inside of a Project Library, and only exposing the top-level "Analyze My Data" VI, my Analysis routine, which didn't know (and didn't care) about the two different Data TypeDefs, just figures out (from the XML) which Version of data I have and then calls either Lib1:Analyze My Data or Lib2:Analyze My Data. If I ever change the Version again, I just need to copy the code in the Library to a new Lib3 Library, modify the TypeDef and related version-specific code as needed, and I'm done.
I may have made this sound easy -- trust me, it was a definite learning experience. While trying this out, the first thing I did was to "break" my installations of LabVIEW 2012, 2013, and 2014 (curiously, LabVIEW 2011 wasn't broken). It stayed "broken" for about a week, then "cured" itself (I'd done something illegal, or maybe just immoral, with my Library, and it took a while to purge the badness).
BS

Which version of Photoshop?

My Wife would like to be able to combine sketches with photographs to create greetings vards party invites etc. Is Photoshop the right product and if so which version should she purchse? Many thanks in advance...

Photoshop to purchase is about $700 US, although you can rent per month. You can do almost anything with it, but the learning curve is steep. But this may be overkill. You might be satisfied with Photoshop Elements, which is less than $100.
I suggest you take the free 30 day trial and see if PSE fits her needs.

Which version of Windows XP for Fusion

I am a lifetime PC user switching to Mac. I just bought my iMac, as well as Fusion because I have some software that will only run in Windows. When looking to buy Windows, there are tons of choices, and one of them XP Home Full Version SP2 OEM says that it will run with Boot Camp but not Parallels. It doesn't mention Fusion. I'm told I really don't need XP Pro, and if that's the case, which version of XP Home should I get so I can be sure it will work with Fusion. I don't plan to use Boot Camp. Thanks

Hi and welcome to Discussions,
if a Windows XP version is claimed to work with BootCamp than it also should work with Parallels or Fusion.
Any XP Home with SP2 version, even OEM, usually works with BootCamp/Parallels/Fusion.
Just stay away from 'bundled' versions, that originally were sold together with a computer (like Dell, HP, and the like).
These versions mostly only works with that computer.
Stefan

Which version of photoshop will work with my laptop?

Hi, I need to quickly brush up on basic skills of photoshop and was wondering which version would be compatable with my laptop?
Here are my specs:
Windows Vista Home Premium Service Pack 2
System:
Manufacturer: Hewlett-Packard
Model: HP Pavilion dv4 Notebook PC
Processor: Intel(R) Core (TM)2 Duo CPU T6500 @ 2.10 GHz
Memory (RAM): 4.00 GB
System type: 64-bit Operating system
thanks!

CS6
Mylenium

DB connect problem,Disp+Work.exe dies and the work processes die on startup

Dear Experts,
I am getting the error on SAP startup,Disp+Work.exe dies and the work processes die on startup.
I found below error in my DEV_W0 trace as below
*failed to establish conn to np:(local).*
*C Retrying without protocol specifier: (local)*
*C Provider SQLNCLI could not be initialized. See note #734034 for more information.*
*C Using provider SQLOLEDB instead.*
*C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']*
*C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.*
*C Procname: [ExecuteAndFlush - no proc]*
But i could see the user 'pec' is availble in my database users list with db_owner , public permissions also been assigned to it.
However When trying to delete a user on SQL server 2000, we recieve the message "You cannot drop the selected login ID because that login ID owns objects in one or more databases.".
Please refer the below work process trace and please suggest the possible solution..
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat Feb 14 15:10:21 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.195)
B New connection 0 created
M sysno 00
M sid PEC
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 196
M intno 20020600
M make: multithreaded, Unicode
M pid 3844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3844) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 21120 (1320)
M DpShMCreate: sizeof(tm_adm) 29558776 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1160000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (384056/329560/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07800040, size: 31492672)
M DpShMCreate: allocated sys_adm at 07800040
M DpShMCreate: allocated wp_adm at 07801B88
M DpShMCreate: allocated tm_adm_list at 07806E08
M DpShMCreate: allocated tm_adm at 07806E30
M DpShMCreate: allocated wp_ca_adm at 09437628
M DpShMCreate: allocated appc_ca_adm at 0943D3E8
M DpShMCreate: allocated comm_adm_list at 0943F328
M DpShMCreate: allocated comm_adm at 0943F340
M DpShMCreate: allocated vmc_adm_list at 0955A680
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0955A6A8
M DpShMCreate: allocated wall_adm at 0955A6B0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Feb 14 15:10:22 2009
M calling db_connect ...
C Thread ID:3868
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 195
C patchcomment DBCON: database names must not start with digits (1078650)
C np:(local) connection used on CAMBSVR15
C CopyLocalParameters: dbuser is 'pec'
C
C Sat Feb 14 15:10:23 2009
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Sat Feb 14 15:10:26 2009
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1280]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9621]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server cambsvr15_PEC_00 on host cambsvr15 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sat Feb 14 15:10:26 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9806
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3844) [dpnttool.c 357]
I would greatly appriciate your quick response, Since it is a production issue.
Many Thanks,
Vinod

Hi Rohit and Subhadip,
My problem was solved, thanks for your effort.
reason is that, user 'pec' not been associated with login user for the SQL server.
subha : when i execute the first command which you suggested, but couldn't find any user's list.
so i didn't tried with the second command. just to give a final try i have executed the script like below and its worked out.
USE PEC
GO
EXEC sp_change_users_login 'update_one','pec','pec'
GO
Now i see that all work process are starting,,,thank you so much rohit and subhadip
I could have try this first ,when you guys suggested since i couldn't find any output with the first command i didn't proceed with second one.
Since deleting and creating method doesn't seems to be a good, i have just to give a try executed the second command and its worked.
Thanks for your time and patience
Many Thanks,
Vinod

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

How to install .exe applications and the java on m...

hi ! sorry if this has already been discussed but i wanted to know ~~~ how to install .exe applications and the java on my n9 ~~~ ... because i wanted to use plenty of other apps which are not supported but these 2 would help fix the issue

Is it stil not possible to install java applications on N9?
Files containing JAD and JAR-ending in the file name.
I am not familiar with Nokia N9 so I ask even if I suppose that JAR and JAD files are not able to install on a Nokia N9.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Norton deleted the "getplusplus_adobe_reg.exe" file and now I get an error message in Firefox

I recently installed the newest version of Adobe Flash Player. As I was installing the program, Norton Internet Security said that the "getplusplus_adobe_reg.exe" file was suspect, so I deleted it. Now, every time I load Firefox, I get an error message saying that file is missing, and some websites do not function properly. I tried uninstalling and re-installing Firefox, and this did not solve the problem.
== This happened ==
Every time Firefox opened
== I installed the newest Adobe Flash Player version

Getplus is the problematic Adobe Download Manager (DLM) which no one needs. See if the suggestions in the following will help you to get rid of it: http://secunia.com/community/forum/thread/show/3665/adobe_dlm_will_not_uninstall
When updating or installing Adobe Flash (aka Shockwave Flash) follow these instructions (NOTE: you have the most current version installed):
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r22; current ver. 10.1 r53 ('''important security update 2010-06-10''')
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.5.0_04 (~~red:very old~~); current ver. 1.6.0.20 (important security update 04-15-2010)
(~~red:Firefox 3.6 and above requires Java 1.6.0.10 or higher~~; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox''': your ver. N/A; current ver. 9.3.2
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

The "Fix_Admin709.exe" patch and the Distiller - which version?

Similar Messages

Maybe you are looking for