The fixed value date is empty and not displayed in the VA05 report

Hi SD Gurus,
With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered.
But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it shows the blank). Can you any one help me with regard.
We would like to fix this problem.
Thanks in advance for providing solution to this query.
Thanks and Regards,
SAP-SD group

Hi janarthanam,
Ok.
Goto t-code SQVI,SAP Quickviewer.
Give a name to your query and enter description ,etc.
Next enter the table from which you want to fetch data,ie,VBKD .
Select "Layout mode" for displaying data on the SAP screen or "Basis mode " if you want to extract the data to a word doc,excelsheet or a flat file.
Next you can select the fields you want to display into your report,their position and ascending/descending order,Here make sure u select
the field u need to display ie. the fixed value date ( VALDT) .
also select the fields u wish to have in the selection criteria.
Enter these required information and u would get a report on the SAP screen or in your desired format.
Hope it will suffice you.
For any queries ,your are welcomed.
Thanks,
Umesh.

Similar Messages

Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
lv_visible = abap_false.

Fixed Value Date at line item level is not in changable mode when copied

Dear SDN Team,
Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010). In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
But i would like to have the fixed value date in the return order as 10.03.2010 but the field is greyed out.
But normally when the sales document is created with reference to the preceding document the same will be copied. But field is greyed out and it is not in changable mode.
Can any one help how to solve this.
I have checked also SAP Note where i did not find any messages.
In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
Pleas help me to resolve this.
With Regards,
Jai

Hi Lakshmipathi,
I am sharing the resolution which was done to this requirement.
We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document. Once this is done.
We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
Thanks and Regards,
Jana

Fixed Value Date in edit mode at the time of invoice creation

Hi Friends,
I want to make fixed value date in edit mode at time of creation of invoice, in header data.
any user exit to achieve this?
Thanks
Dileep Kumar

Did you read User Exits For Billing in online help ?
Regards,
Raymond

Fixed Value date- in Sales Order Line Item

Hi ,
The Filed Fixed Value Date , from where it gets the value.
In My Case One Perticuler Material the Fixed Value Date is comming as Previous year date for todays billing document.
How can avoide this fixed value date for the Sales order at Line item level. Where the Config is done for this.
Thanks & Regards,
Sridhar Sha

Hi Sridhar,
I dont think this feild is coming from some customization, I think user need to enter it manually.
If it comes by default in your case then please check, have you created current order with the refrence of old order?
Because there is some chances that the date iscoming from the refrencing document.
Regards.
MT

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

HOW TO display a simple line of text if the user isn't logged in and not display it if they are?!?!?

there must be a way to display a simple line of text (or a link) if the user isn't logged in (as wholesale customer), and not display it if they are?!?!?
it's a basic kind of <php echo> var type of function.... there must be an equivalent in this BC system..... anyone?!?!? PLEASE!
thank you
Chris.

ok, after chattting with LIVE SUPPORT i've discovered {module_isloggedin}
now i just need to integrate it into my Online Store modules!

Changing the Condition value in Quatation only and not in Order

Hi Gurus,
We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

Hi
You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
IF VBAK-AUART = (Your quotation type)
LOOP AT XKOMV.
IF XKOMV-KSCHL = 'PR00'.
SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
I_T685A-KMANU = 'C'.
MODIFY I_T685A INDEX SY-TABIX.
MODIFY T685A FROM TABLE I_T685A.
REFRESH I_T685A.
ENDIF.
ENDLOOP.
like this discuss with your abapper and build the logic
regards
Prashanth

HP Mini: battery completely empty and not charging.

Seems, that computer was not shouted down completely, when I close laptop. During next two days battery was discharged completely and not working anymore.
What I have to do? I bought pc in August, 2010 - before that battery was really ok (around 4-5 hours).

Hi @Pandamoniumrain ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Column value & heading is not displaying in xml publisher report

Hi All,
All Inventories Value Report - Average Costing Standard report copied to cusoom report. Now in rdf I need to add few column like PO Number, Receipt Number, Supplier Number etc.. for this I need Inventory_item_id & organization_id so that I can create the new data modal. But not able to get the Inventory_item_id & organization_id column display in .xml file. Please look and let me koow the solution.
SELECT cost_group,
       item,
       category,
       description,
       uom,
       SUM(STKQTY) STKQTY,
       SUM(INTQTY) INTQTY,
       SUM(RCVQTY) RCVQTY,
       SUM(STKVAL) STKVAL,
       SUM(INTVAL) INTVAL,
       SUM(RCVVAL) RCVVAL,
        inventory_item_id,
       organization_id
FROM(
SELECT CCG.cost_group COST_GROUP,
       &P_ITEM_SEG ITEM,
       &P_CAT_SEG CATEGORY,
       MSI.description DESCRIPTION,
       MSI.primary_uom_code UOM,
       ROUND(SUM(CIQT.rollback_qty),:P_Qty_Precision) STKQTY,
       0 INTQTY,
       0 RCVQTY,
       ROUND(
         SUM(CIQT.rollback_qty) *
         DECODE(SUB.asset_inventory,1,CICT.item_cost,0) *
         :pv_exchange_rate/
         :pv_round_unit
       :pv_round_unit STKVAL,
       0 INTVAL,
       0 RCVVAL,
      CIQT.inventory_item_id,
       CIQT.organization_id
FROM   cst_inv_qty_temp CIQT,
       cst_inv_cost_temp CICT,
       mtl_parameters MP,
       mtl_system_items_vl MSI,
       mtl_categories MC,
       mtl_secondary_inventories SUB,
       cst_cost_groups CCG
WHERE CIQT.qty_source in (3,4)
AND    CICT.cost_source = 1
AND    CICT.organization_id = CIQT.organization_id
AND    CICT.inventory_item_id = CIQT.inventory_item_id
AND    (   MP.primary_cost_method = 1
       OR CICT.cost_group_id = CIQT.cost_group_id) -- should we split?
AND    MP.organization_id = CIQT.organization_id
AND    SUB.organization_id = CIQT.organization_id
AND    SUB.secondary_inventory_name = CIQT.subinventory_code
AND    MSI.organization_id = CIQT.organization_id
AND    MSI.inventory_item_id = CIQT.inventory_item_id
AND    MC.category_id = CIQT.category_id
AND    CCG.cost_group_id = NVL(CIQT.cost_group_id,MP.default_cost_group_id)
GROUP
BY     CCG.cost_group,
       &P_ITEM_SEG,
       &P_CAT_SEG,
       MSI.description,
       MSI.primary_uom_code,
       DECODE(SUB.asset_inventory,1,CICT.item_cost,0),
        CIQT.inventory_item_id,
       CIQT.organization_id
UNION ALL
SELECT CCG.cost_group COST_GROUP,
       &P_ITEM_SEG ITEM,
       &P_CAT_SEG CATEGORY,
       MSI.description DESCRIPTION,
       MSI.primary_uom_code UOM,
       0 STKQTY,
       ROUND(SUM(CIQT.rollback_qty),:P_Qty_Precision) INTQTY,
       0 RCVQTY,
       0 STKVAL,
       ROUND(
         SUM(CIQT.rollback_qty) *
         CICT.item_cost *
         :pv_exchange_rate/
         :pv_round_unit
       :pv_round_unit INTVAL,
       0 RCVVAL,
        CIQT.inventory_item_id,
       CIQT.organization_id
FROM   cst_inv_qty_temp CIQT,
       cst_inv_cost_temp CICT,
       mtl_parameters MP,
       mtl_system_items_vl MSI,
       mtl_categories MC,
       cst_cost_groups CCG
WHERE CIQT.qty_source in (6,7)
AND    CIQT.organization_ID = :P_ORG_ID
AND    CICT.cost_source = 1
AND    CICT.organization_id = CIQT.organization_id
AND    CICT.inventory_item_id = CIQT.inventory_item_id
AND    (   MP.primary_cost_method = 1
       OR CICT.cost_group_id = CIQT.cost_group_id) -- should we split?
AND    MP.organization_id = CIQT.organization_id
AND    MSI.organization_id = CIQT.organization_id
AND    MSI.inventory_item_id = CIQT.inventory_item_id
AND    MC.category_id = CIQT.category_id
AND    CCG.cost_group_id = NVL(CIQT.cost_group_id,MP.default_cost_group_id)
GROUP
BY     CCG.cost_group,
       &P_ITEM_SEG,
       &P_CAT_SEG,
       MSI.description,
       MSI.primary_uom_code,
       CICT.item_cost,
        CIQT.inventory_item_id,
       CIQT.organization_id
UNION ALL
SELECT CCG.cost_group COST_GROUP,
       &P_ITEM_SEG ITEM,
       &P_CAT_SEG CATEGORY,
       MSI.description DESCRIPTION,
       MSI.primary_uom_code UOM,
       0 STKQTY,
       0 INTQTY,
       ROUND(SUM(CIQT.rollback_qty),:P_Qty_Precision) RCVQTY,
       0 STKVAL,
       0 INTVAL,
       ROUND(
         SUM(CIQT.rollback_qty)*
         CICT.item_cost *
         :pv_exchange_rate /
         :pv_round_unit
       :pv_round_unit RCVVAL,
      CIQT.inventory_item_id,
       CIQT.organization_id
FROM   cst_inv_qty_temp CIQT,
       cst_inv_cost_temp CICT,
       mtl_system_items_vl MSI,
       mtl_categories MC,
       mtl_parameters MP,
       cst_cost_groups CCG
WHERE CIQT.qty_source = 9
AND    CICT.cost_source = 3
AND    CICT.organization_id = CIQT.organization_id
AND    CICT.inventory_item_id = CIQT.inventory_item_id
AND    CICT.rcv_transaction_id = CIQT.rcv_transaction_id
AND    MSI.organization_id = CIQT.organization_id
AND    MSI.inventory_item_id = CIQT.inventory_item_id
AND    MC.category_id = CIQT.category_id
AND    MP.organization_id = CIQT.organization_id
AND    CCG.cost_group_id = NVL(CIQT.cost_group_id,MP.default_cost_group_id)
GROUP
BY     CCG.cost_group,
       &P_ITEM_SEG,
       &P_CAT_SEG,
       MSI.description,
       MSI.primary_uom_code,
       CICT.item_cost,
         CIQT.inventory_item_id,
       CIQT.organization_id
) TEMP
GROUP BY cost_group,
       item,
       category,
       description,
       uom,
        inventory_item_id,
       organization_id
- <CSTRAIVA>
- <LIST_G_COST_GROUP>
- <G_COST_GROUP>
<COST_GROUP>100191</COST_GROUP>
- <LIST_G_CATEGORY>
- <G_CATEGORY>
<CATEGORY>Not Assigned</CATEGORY>
- <LIST_G_ITEM>
- <G_ITEM>
<ITEM>82557653</ITEM>
<DESCRIPTION>BEARING LINING (GLACIER 100KSA075)</DESCRIPTION>
<UOM>EA</UOM>
<STKQTY>6</STKQTY>
<STKVAL>38934.7</STKVAL>
<RCVQTY>0</RCVQTY>
<RCVVAL>0</RCVVAL>
<INTQTY>0</INTQTY>
<INTVAL>0</INTVAL>
<CF_ITEM>82557653</CF_ITEM>
<TOTQTY>6</TOTQTY>
<TOTVAL>38934.7</TOTVAL>
<CF_STKVAL_DSP>38,934.70</CF_STKVAL_DSP>
<CF_INTVAL_DSP>0.00</CF_INTVAL_DSP>
<CF_RCVVAL_DSP>0.00</CF_RCVVAL_DSP>
<CF_TOTVAL_DSP>38,934.70</CF_TOTVAL_DSP>
</G_ITEM>
</LIST_G_ITEM>
<CF_ORDER />
<CF_CATEGORY>Not Assigned.</CF_CATEGORY>
<SUMSTKVALPERCATEGORY>38934.7</SUMSTKVALPERCATEGORY>
<SUMINTVALPERCATEGORY>0</SUMINTVALPERCATEGORY>
<SUMRCVVALPERCATEGORY>0</SUMRCVVALPERCATEGORY>
<SUMTOTVALPERCATEGORY>38934.7</SUMTOTVALPERCATEGORY>
<CF_SUM_STKVAL_CAT_DSP>38,934.70</CF_SUM_STKVAL_CAT_DSP>
<CF_SUM_INTVAL_CAT_DSP>0.00</CF_SUM_INTVAL_CAT_DSP>
<CF_SUM_RCVVAL_CAT_DSP>0.00</CF_SUM_RCVVAL_CAT_DSP>
<CF_SUM_TOTVAL_CAT_DSP>38,934.70</CF_SUM_TOTVAL_CAT_DSP>
</G_CATEGORY>
</LIST_G_CATEGORY>
<SUMSTKVALPERCOST_GROUP>38934.7</SUMSTKVALPERCOST_GROUP>
<SUMINTVALPERCOST_GROUP>0</SUMINTVALPERCOST_GROUP>
<SUMRCVVALPERCOST_GROUP>0</SUMRCVVALPERCOST_GROUP>
<SUMTOTVALPERCOST_GROUP>38934.7</SUMTOTVALPERCOST_GROUP>
<CF_SUM_STKVAL_CG_DSP>38,934.70</CF_SUM_STKVAL_CG_DSP>
<CF_SUM_INTVAL_CG_DSP>0.00</CF_SUM_INTVAL_CG_DSP>
<CF_SUM_RCVVAL_CG_DSP>0.00</CF_SUM_RCVVAL_CG_DSP>
<CF_SUM_TOTVAL_CG_DSP>38,934.70</CF_SUM_TOTVAL_CG_DSP>
</G_COST_GROUP>
</LIST_G_COST_GROUP>
<SUMSTKVALPERREPORT>38934.7</SUMSTKVALPERREPORT>
<SUMINTVALPERREPORT>0</SUMINTVALPERREPORT>
<SUMRCVVALPERREPORT>0</SUMRCVVALPERREPORT>
<CS_DUMMY>1</CS_DUMMY>
<SUMTOTVALPERREPORT>38934.7</SUMTOTVALPERREPORT>
<CF_SUM_STKVAL_REP_DSP>38,934.70</CF_SUM_STKVAL_REP_DSP>
<CF_SUM_INTVAL_REP_DSP>0.00</CF_SUM_INTVAL_REP_DSP>
<CF_SUM_RCVVAL_REP_DSP>0.00</CF_SUM_RCVVAL_REP_DSP>
<CF_SUM_TOTVAL_REP_DSP>38,934.70</CF_SUM_TOTVAL_REP_DSP>
</CSTRAIVA>

Thanks for your reply.
I did below changes in the CQWP but no luck. Please let me know if any further modification needed.
Thank you!
<property name="DataMappingViewFields" type="string">{b9e6f3ae-5632-4b13-b636-9d1a2bd67120},Computed;{543bc2cf-1f30-488e-8f25-6fe3b689d9ac},Image;{94f89715-e097-4e8b-ba79-ea02aa8b7adb},Lookup;{fa564e0f-0c70-4ab9-b863-0177e6ddd247},Text;{33f34208-1553-4361-b3ff-26f5da1ae591},Text;{b7ff04a4-a33a-429a-99bd-0ac5367bd189},User;{37cb0520-3169-4bca-9941-1886a5a73f92},DateTime;{6b2c772c-a130-4814-bfd0-d84efb061e3b},TaxonomyFieldType;{d31655d1-1d5b-4511-95a1-7a09e9b75bf2},User;{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f},DateTime;</property>
<property name="DataMappings" type="string">Editor:{d31655d1-1d5b-4511-95a1-7a09e9b75bf2},Editor,User;|Actors:|Modified:{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f},Modified,DateTime;|Input:|Title:{fa564e0f-0c70-4ab9-b863-0177e6ddd247},Title,Text;|LinkUrl:{94f89715-e097-4e8b-ba79-ea02aa8b7adb},FileRef,Lookup;|ExpiryDate:{37cb0520-3169-4bca-9941-1886a5a73f92},ExpiryDate,DateTime;|Author:{d31655d1-1d5b-4511-95a1-7a09e9b75bf2},Editor,User;|Approver:{f30275e3-0638-451f-bb1f-b5c74ac432ef},Approver,User;|PreRequisites:|DocumentOwner:{b7ff04a4-a33a-429a-99bd-0ac5367bd189},DocumentOwner,User;|Trigger:|RelatedtoGeneralTopic:{6b2c772c-a130-4814-bfd0-d84efb061e3b},RelatedtoGeneralTopic,TaxonomyFieldType;|OpenInNewWindow:|Frequency:|Image:|Output:|Body:|Locallyvalidfor:{31a5c887-10a3-49ca-afa0-97c5679bbda9},Locallyvalidfor,TaxonomyFieldType;|ProcessOwner:|ShortDescription:{33f34208-1553-4361-b3ff-26f5da1ae591},ShortDescription,Text;|Description:{691b9a4b-512e-4341-b3f1-68914130d5b2},ShortComment,Text;|Created:|LinkToolTip:|Mandatory:|ProcessManager:|ImageUrl:{b9e6f3ae-5632-4b13-b636-9d1a2bd67120},EncodedAbsThumbnailUrl,Computed;{543bc2cf-1f30-488e-8f25-6fe3b689d9ac},PublishingRollupImage,Image;|</property>

List of values is not displayed in web inteligence report

I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
I am using Business Objects XI 3.1 ..

SOLVED
     CMC -> Connections
-     Right click connection name, Click u201CTools > Check Relationshipu201D
-     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
-     Assign Security for u201CEveryoneu201D
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D
     CMC -> Universes
-     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
-     Under u201CUser Securityu201D, click Everyone and assign security
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D

Have a gap in detail of first page and not display group footer on each pag

Please help me about Memo field in SubReport in CrystalReportXI. I have a SubReport that need to display pageheader, detail, page footer, and in detail of subreport contains memo field and set the property of this text box to "Can Grow" = Yes .However, CrystalReportX does not support to display pageheader, pagefooter in SubReport. So. I have created a formular FakePageHeader that has code as
"WhileReadingRecords;
true"
and group in this field and checked option repeat group header on each page and right click Section Expert->check print at Bottom of page for Group Footer.
This problem is when I preview Subreport. It display text in group header and a gap in detail of first page and view next page, the subreport display right data of memo field. But the report still not display group footer on each page.
How do I can remove a gap in first page and display group footer on each page?
Thanks

in subreport in format for the memo field uncheck keep object together.
You can not force group footers to repeat on each page.
I have not tried this but you might be able to capture the data you want to show in SR page footer and display in main report page footer, using shared variables.
Ian

Value category wise budget and actuals display in S_ALR_87013558 report

Hello PS consultants,
There is a requirement in my project, where the business users want to see the report on hard budgeted cost element group , soft budgeted cost element group and total in different rows. In my project, there is one value category which has been made exempt from availabilty control(for repairable spares) and there are others which are under availability control. Also, the business wants to see all the columns as per S_ALR_87013558 report in the new report per the 2 categories of cost element group and total (but the budgeting here is done as per the WBS level, so how to satisfy this need also). The S_ALR_87013558 report gives the various value categories, but only assigned values against it(as budget is not against cost element). Also, in this report , it is not possibel to exclude one value category to see only the hard budgeted cost element group.
Please help.
Regards

Thanks Sam.
But my requirement is to exclude one particular value category, as it is not possible to include all the value categories in the report as there are large number of value categories. Is there any way to exclude one value category?
Thanks Abdul.
But if I suppress the value category , then it will be suppressed from the central level in PS and hence, it will not be included in any calculations in any of the standard report. Is there any way to suppress one value category from only one report, without affecting other reports?
Please help.
Regards

XML has data but PDF is not displaying data

Hi Gurus,
I have one report with excel and pdf out put .
excel is working fine but pdf is not displaying data showing blank page . both out puts are using same XML.
Intresting thing is if I open RTF from bi publisher desktop and load XML data then i can see all the records.
but The same RTF is not showing data from Report.
I don't know what is the wrong with RTF.
I am attaching RTF and XML. could you please go through it and help me ?
Thanks for your help.

Hi Bogdan,
i have 2 outputs for this report excel and PDF.
after scheduling report excel is working fine but PDF out put is failure. i am getting following message.
Job Name : Payment Request
Job Executed Date : March 19, 2015 9:15:11 AM CDT
Status : Job was failed.
View History :
Detail Message:
::RIPPLE_OUTPUT_FAILED::[INSTANCE_ID=vausobias201.austin.ppdi.com.1394740179760] [OUTPUT_ID=1006] ::DOCUMENT_GENERATION_FAILED::[INSTANCE_ID=vausobias201.austin.ppdi.com.1394740179760] [OUTPUT_ID=1006][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
        at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:447)
        at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
        at oracle.xdo.enterpriseScheduler.u

My ipad not recognized and not displayed in iTunes

Hello,
i have a problem with my ipad 1 16 GB Wi-Fi,
when i try to connect my ipad to my laptop, it nothing happend. its not displayed in itunes, nowhere. its not also beeping.
I also have problem to charge my ipad, when i plug it in to the electric connector, its showing that ipad is not charging (but i can see that is charging slowly)
but
i rty a diagnostic via itunes -> no connected devices found
i try to connect to another computer -> still same problem
i try to change a docking cable -> still same problem
i try restart all settings -> still same problem
i try to go to recovery mode to detect via itunes -> still same problem
now when I deleted all data in ipad, i can see only "connect to itunes)
what i can do now ? is there some apple diagnostic tool, or some special usb mode to get it work ?
please help me :-)
thanks Matt

I too have a problem with my ipad 1 16 GB Wi-Fi, when i try to connect my ipad to my laptop, I get devise not reconized and its not displayed in itunes, (no beeping). I try to connect to a mac pro and get nothing, I try to change a docking cable, still same problem, same problem with all pc's.
When I connect an ipod it is found and restored no problem.
I also have had a problem charging my iPad, when i plug it in to the an electrical outlet, its showing that iPad is not charging (but it does charge very slowly).
Problem is before I new I had a problem I restored the iPad, now all I have is a paper weight with "connect to itunes.
Is there any help ANYWHERE what i can do now ? is there some apple diagnostic tool, or some special usb mode to get it work ?

The fixed value date is empty and not displayed in the VA05 report

Similar Messages

Maybe you are looking for