The Flash doesn't work Correctly when using Photo camera in iOS5

Hi ! I'e updated my iPhone 4 recently (yesterday) and this evening I've use it to make some photo and I've turn on the flash but when I take the photo the flash turn in advance or make a little glow and the photo saved result totally black. It is this bug to someone else? There's a solution ?

I'm having exactly the same problem. The flash goes off, but the resulting photo is completely dark. It seems as though the flash burst is not synchronized with the camera "shutter."
The camera seems to work fine otherwise, and if I record video with the flash on it looks fine. Flash photos looked fine before I upgraded my iPhone to IOS 5 today.
I'm wondering if it's a widespread problem—this is the only other mention of it I could find.

Similar Messages

  • [svn:fx-4.x] 15119: Menu. popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction =rtl.

    Revision: 15119
    Revision: 15119
    Author:   [email protected]
    Date:     2010-03-29 13:49:52 -0700 (Mon, 29 Mar 2010)
    Log Message:
    Menu.popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction=rtl.  Also made same change for AccordionHeader, CheckBox and RadioButton just to be safe.
    QE notes:
    Doc notes: None
    Bugs: SDK-26028
    Reviewed By: Kevin
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-26028
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/framework/defaults.css

    Thank you so much wchp, this is brilliant. I have had this annoying problem for a long time. I eventually rang Mac support, they did not know how to fix the problem as you have suggested so they instigated many hardware replacements which eventually left my iMac severely crippled. They eventually replaced it with the latest model. But I spent two months working with a disabled computer which really interfere with my work.
    Your solution appears to have solved my problem, at least so far, but I am hopeful that it is a permanent fix. I hope that your suggestions are taken up by Apple support. This may solve many users problems and avoid Apple making expensive fixes that don't actually work.
    I thought that the new iMac would not have the 'Wake up from sleep by painting in the login window' problem but it did, this really annoyed me. Anyway now the problem appears to be solved, it's not I will repost and keep working on it. Thanks again.

  • [solved] texlive doesn't work correctly, when lmodern is used

    Hi!
    I've got a problem with texlive: When I use the package lmodern and my document contains mathematical symbols like integrals or sums or special chars like german umlauts, dvips and pdftex give me error messages and the symbols are not displayed correctly in the resulting document.
    Here an example .tex-file:
    \documentclass{scrartcl}
    \usepackage{amsmath}
    \usepackage{lmodern}
    \begin{document}
    $$\int_0^r e^{-x} \sin(x)\,\mathrm dx$$
    \end{document}
    dvips gives the following output:
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmex10
    mktexpk: don't know how to create bitmap font for lmex10.
    kpathsea: Appending font creation commands to missfont.log.
    dvips: Font lmex10 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Checksum mismatch in font lmex10
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmmi8
    mktexpk: don't know how to create bitmap font for lmmi8.
    dvips: Font lmmi8 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Design size mismatch in font lmmi8
    dvips: Checksum mismatch in font lmmi8
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 rm-lmr8
    mktexpk: don't know how to create bitmap font for rm-lmr8.
    dvips: Font rm-lmr8 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Design size mismatch in font rm-lmr8
    dvips: Checksum mismatch in font rm-lmr8
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 lmmi10
    mktexpk: don't know how to create bitmap font for lmmi10.
    dvips: Font lmmi10 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Checksum mismatch in font lmmi10
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmsy8
    mktexpk: don't know how to create bitmap font for lmsy8.
    dvips: Font lmsy8 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Design size mismatch in font lmsy8
    dvips: Checksum mismatch in font lmsy8
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 rm-lmr10
    mktexpk: don't know how to create bitmap font for rm-lmr10.
    dvips: Font rm-lmr10 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Checksum mismatch in font rm-lmr10
    </usr/share/texmf/dvips/base/tex.pro>. [1]
    Also, a file named missfont.log is created and contains the following:
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmex10
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmmi8
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 rm-lmr8
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 lmmi10
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmsy8
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 rm-lmr10
    I used lmodern several times in the past and it worked correctly. Maybe some update lead to this...
    Can anyone confirm this problem or give some hints, how to solve this problem? I tried reinstalling all texlive packages, updmap, fmtutil...
    Thanks for help!
    Michael
    EDIT:
    Reinstalling all texlive packages didn't help. But uninstalling them, deleting all files in /usr/share/texmf* and reinstalling them did help. I don't know why, but the problem is solved. Sorry for the inconvenience.
    Last edited by Bevan (2010-02-20 23:51:43)

    The way some TeX-related font packages use updmap-sys to update TeX's font database (/etc/texmf/web2c/updmap.cfg) may cause this problem. For me, minionpro started to give similar 'missfont' errors when I upgraded texlive-latexextra.
    I don't know the right/best way to handle TeX fonts and use updmap-sys in install files, however installing *.maps files into the /var/lib/texmf/arch/installedpkgs/ directory seems to be a more robust solution than calling updmap-sys with '--enable Map' or '--enable MixedMap' options. Adapting the code used in the build files of texlive-latexextra for minionpro solved the problem for me.
    The steps I did:
    Create *.maps file (minionpro.maps).
    Modify  the PKGBUILD (modified minionpro PKGBUILD):
    Add '$pkgname.maps' to the 'source' variable.
    Add these lines to the top of the build() function:
    install -m755 -d $pkgdir/var/lib/texmf/arch/installedpkgs
    install -m644 $pkgname.maps $pkgdir/var/lib/texmf/arch/installedpkgs/
    Update the 'md5sums' variable.
    Modify  the install file to use the *.maps file when updating TeX's font database (modified minionpro.install).
    I hope this helps to solve problems related to other TeX fonts as well.

  • The browser back button is not working correctly when using the search funtion in ProBoards forums. Is there a known issue with ProBoards & FF?

    I have submitted a bug report to ProBoards, but they cannot duplicate the problem I am having, so I am submitting this here in hopes you can find a solution.
    At ProBoards Support and another PB forum while doing searches I found this problem, which continues with repeated testing over the past week or so:
    url: http://support.proboards.com/search
    1. enter perameters for the search (posts only by staff for the last 2 days)
    2. choose one of those post results & click on it (choose a post on page 14 and not on page 1 of the results)
    3. using the browser back button, attempt to return to the previous page of search results
    4. rather than being taken back to the search results with my parameters, the search parameters have been removed and the page show 1000 results of posts by everybody.
    I have tested this over and over again, disabling plugins, and nothing seems to alter the malfunctioning of the back button when I am doing this search function at ProBoards.
    I have tested it in Internet Explorer and find that in IE the browser back button works properly with ProBoards searches. I always get the result I expect, so it's a problem with how FF interfaces with ProBoards, I think.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • The cable doesn't work properly when connected as data cable.

    Hi,
    I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
    Regards,
    Farhan

    Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

  • One button of the keyboard doesn't work correctly

    Hi there,
    I have a problem with my keyboard:
    One button of the keyboard doesn??t work correctly: I want to write down a vowel with an accent (like in French and Spanish?), but if I press the button ´ and then the vowel, TWO dashes (´´) and the vowel appear: ´´i. Normally, there would automatically be an accent on top of the i.
    I have already tried a different keyboard, but it??s the same problem when I connect it to my notebook. I have also tried to choose a different language like French and Spanish, where they have those accents, but it still doesn??t work.
    It would be great if somebody could help me.
    Thanks a lot,
    Hanna

    Hi Hannah,
    You do not say which options you have changed to try using a different language, but there are several options which do slightly different things.
    If you go into Control Panel and select "Regional and Language Options", a new window opens with 3 tabs across the top. Choose "Languages" (the middle one), then press the "Details" button. This opens another window which allows you to view and change settings including the current input language and keyboard settings.
    Changing some of these settings will not make any difference until you reboot your machine.
    I hope this helps, let us know how you get on!
    Weezle

  • The login doesn't work like it used to - why?

    When I used to click from an email link to these discussion forums, it would take me to the particular thread, and then I would login; that would return me to the thread (where I might have to refresh the page to show I was logged in).
    NOW, after logging in, it takes me to the discussions home page, not the thread I was in. No amount of refreshing will bring it back. So the procedure of getting to the discussions is now :
    1) click on the email link and be taken to the thread
    2) click Login and enter login details
    3) find myself at the discussions home page
    4) close the discussions home page
    5) return to Mail and click the email link again
    6) get to the correct thread and find that I am apparently not logged in
    7) refresh the page to show I am now logged in
    This is ridiculously cumbersome and lame. Why can we not login and then return to the thread where we were, as we used to? (The browser is Safari, by the way).

    A faster way, which works for me when I have logged out, is to log in, get the Discussions home page and then hit reload, which takes me to the thread I was looking for.
    Hope this works for you,the alternative is to keep logged-in in your browser and avoid all this.

  • I can not get my mouse to work correctly when using firefox. Works fine on IE

    When I try to use the search bar on home page, my mouse will not click on it. Have same problem with facebook when I try to go back to homepage-it will not click. I do not have this problem when using IE so I know my mouse is working correctly.

    Quit the Mail app.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

  • I cannot use any external monitor, it appear like the port doesn't work , i'm using the mini-dvi port with a VGA adaptor ,

    I've always used the port normally with different monitor but by a couple of weeks it appear like no signal come out.
    Does Anyone knows what can i do ? i.e. How to check or reset the Mini-dvi port ? or if there's any key on the keyboard that can habilitate it or not ?
    Any Help will be appreciate
    Thanks

    Welcome to Apple Support Communities
    You don't have to do anything to make the port work. Reset the SMC > http://support.apple.com/kb/HT3964
    If it doesn't work, try with another monitor to see if it works or another cable. If you haven't got another display, take the MacBook Pro to an Apple Store or reseller, so Apple will test the port and see if it works correctly

  • My MacBook isn't connecting to the Internet. When I try to connect, it shows the signal strength in the top right corner as if it was connected, but the Internet doesn't work. When I go to my network preferences, it says the ip is self-assigned.

    My MacBook won't connect to the Internet, but it's connected to my router. When I go to network preferences, it says that it has a self assigned ip address, and can't connect to the Internet. How can I fix this? Please help!

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • Docs&settings only shows bookmarks from Int Explorer used previously, not Moxilla. How can I save the bookmarks which are shown correctly when using MF?

    I want to save my bookmarks as I have done periodically since 2000 using Xp.
    For copying to F drive or USB, procedure is open C drive, Documents and settings, my name, Favorites
    I have hundreds of sorted bookmarks which I update fairly often.
    Changed to MF about five years ago.
    It looks like nothing has been added to the Favorites within Documents and Settings since then - all have the blue Int. Explorer logo, none in Moxilla colours.
    I was unaware of this as all bookmarks are shown correctly to left of desktop.

    There are three basic options
    #You can backup the bookmarks in a form that Firefox can use. And these include any tags with them.<br />See [[Restore bookmarks from backup or move them to another computer]]
    #Firefox stores History in the same database: '''places.sqlite'' the whole of that or even the whole of the profile may be backed up if necessary. <br /> See [[Back up and restore information in Firefox profiles]]
    #You may back them up by '''export / import''' as HTML. These are the same sort of files as is used for IE favourites / favorites. (These will append or tack on to existing bookmark collections) <br />See [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
    CARE if you restore bookmarks from a backup it overwrites your existing bookmarks so always back them up manually before doing any restore.
    Firefox creates its own library of bookmarks. It is possible to add HTML files from IE to these. You will not be able to make sense of Firefox's .json or .sqlite files other than by allowing them to be used within Firefox. The HTML files may probably be opened directly by Firefox or some other programs such as Word Processors.
    * See [[Import Bookmarks from Internet Explorer]]
    * Also see<br />[[How to use bookmarks to save and organize your favorite websites]] <br /> [[Use bookmark folders to organize your bookmarks]]

  • Tag-copying doesn't work properly when using "Edit in..."

    Hi folks!
    I make use of Nik-plugins a lot to finish off my pictures. That's why I often use the "Edit in..." context-menu for hand over my Lightroom images to the Nik software. Usually I have tagged my images before, so I expect the created TIFF-file to receive the same tagging. But somehow that's not what happens.
    The situation: I'm working on images which are tagged with a certain keyword, i.e. only these images are shown (I clicked the right-arrow on the category to show exactly those images). I hand over the file to the plugin (edit in...). LR creates the TIFF-file. The selection of the image I've created the TIFF of disappears, no new image is selected. I edit the image in the Nik product and save it. Afterwards I cannot see the image in my LR category. I have to switch to the "All Photos" view, find it there, select it, uncheck (strange!?) the tagging for the image, recheck the tagging and then switch to that tag again.
    Does anyone have the same problem? Does anyone have a solution? This really slows down my speed...
    Regards,
    Kopi

    Hi folks!
    I make use of Nik-plugins a lot to finish off my pictures. That's why I often use the "Edit in..." context-menu for hand over my Lightroom images to the Nik software. Usually I have tagged my images before, so I expect the created TIFF-file to receive the same tagging. But somehow that's not what happens.
    The situation: I'm working on images which are tagged with a certain keyword, i.e. only these images are shown (I clicked the right-arrow on the category to show exactly those images). I hand over the file to the plugin (edit in...). LR creates the TIFF-file. The selection of the image I've created the TIFF of disappears, no new image is selected. I edit the image in the Nik product and save it. Afterwards I cannot see the image in my LR category. I have to switch to the "All Photos" view, find it there, select it, uncheck (strange!?) the tagging for the image, recheck the tagging and then switch to that tag again.
    Does anyone have the same problem? Does anyone have a solution? This really slows down my speed...
    Regards,
    Kopi

  • I purchased two days ago the conversion utility from pdf to Word. I can't use it and need a refund. My files consist of very unusual font symbols and the conversion doesn't work correctly.

    I NEED A REFUND  for the conversion utility that  purchased two days ago.l It is because my files consist almost completely of unusual font symbols that I cannot get into the right place on my current computer. I will have to do the conversion manually. It is not Adobe's fault. How do I obtain a refund?

    The subscription has been canceled & refunded. You will get the money within 4 to 5 days. The case # assigned to it is  213516635.
    Please feel free to contact in case of any issue.
    Regards
    Rajshree

  • Sound on my ipad only works when I enter my pass code and when I play games. But when I typed, however, or try to listen to music/YouTube/Netflix, the sound doesn't work. When I double tap and go to the task manager, the volume slider has no dot. Help?

    I did not have this problem earlier today. I haven't dropped it recently or any such thing. I have, however, used two different audio jacks today. Although it makes keyboard sounds when I type in my pass code, it doesn't make the sounds otherwise. I also tested the sound on temple run and it worked. My slider key is set to mute, not to lock screen. When I try to adjust the volume, it'll say "sound effects" and the volume will be turned all the way down, but it won't let me turn it up. I got this iPad in December and unfortunately did not purchase AppleCare and I believe the warranty has passed. Any suggestions as to what's wrong?

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Completion Insight not working correctly when using Enterprise User Security (EUS) logon

    This is a pre existing issue we've experienced with SQL Developer, though I've only just worked out what is causing the issue it is present in previous versions of the tool, up to the current 4.0.EA2.
    We experience issues with the Completion Insight functionality of SQL Developer.
    When we log into a database using Enterprise User Security i,e authenticating against OID, the schema of the database account is prefixed to any reference to public synonyms, ie all user_%, all_%, dba_% and v$% views.
    When I change the authentication of the database account back to normal database authentication the schema prefix correctly isn't shown. It simply suggests the synonym name of the views.
    An example of this is as follows when attempting to query the DBA_TABLES view:
    The database account is ORADBA and has DBA privs.
    The EUS user that is mapped to the ORADBA schema is dbutler.
    The ORADBA user is configured to authenticate externally (against OID).
    I login with my dbutler directory credentials:
    If I start typing:
    select * from dba_tabl
    The object name is suggested as ORADBA.dba_tables
    If I change the authentication of the ORADBA account back to database authentication, the prefix is no longer present.
    i.e If I start typing:
    select * from dba_tabl
    The object name is suggested as dba_tables

    If you're not using DB 10.2 this is the "expected" behavior for the DB. See also metalink note 351170.1 "Enterprise Users Can Connect to a Database when the OID Account is Disabled"
    regards,
    --Olaf                                                                                                                                                                                                                                                                                                                                                                                                                   

Maybe you are looking for