The flash video can not be loaded. The output may not be proper

Hi there,
using CP7, I changed a couple of things on some slides and now I get the above message when publishing and/or previewing. I have search the forum and found others have the issue, but no answer how to fix it...?
Anyone still getting this error?
Kind Regards
Rossco

Hello....
Can anybody help with this..?
Cheers
Rossco

Similar Messages

Unable to publish projects with inserted video - error message The Flash video can not be loaded

I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.

Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

Captivate 6 Video Issue: "The flash video can not be loaded. The input may not be proper"

I've already published this particular project with multiple videos embedded with no problems in Captivate 6. I had to change one video and went to re-publish the project. Upon completing the publish, I receive an error message on EACH slide that has embedded video:
"The Flash Video Can Not Be Loaded. The Input May Not Be Proper"
There wasn't any issues with the project until changing the one video that needed to swapped out. I also tried publishing this in Captivate 8 to the same results.
Specs:
Windows 7 Pro
Captivate Version 6.1.1.240
Intel Core i5 25-20 CPU @ 2.5 Ghz
4 GB RAM
32-Bit Operating System
If anyone knows why this issue has presented itself and how we can get around it, much would be appreciated!
Thanks,
Jon

Hi there,
Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
I am a little confused here. Are you getting this error while inserting a FLV video through Insert option or inserting a video through Video > Insert Slide Video or inserting a new slide?
Re-linking means reinserting the video file. If you have already tried reinserting the video file, then have you tried inserting a different video?
Also what operating system you have on your system?
Thanks!
Shekhar

Flash video can not be loaded

Using Captivate 6, when I make any changes to an already published project that contains flash video, upon republishing I get a pop up stating "The flash video can not be loaded. The output may not be proper." It only happens when I make a change to a previously published project. Every time I encounter this problem, my only fix is to delete each flv and re-insert the video, and republish. Any ideas?

Hi there
You say it's intermittent. The bane of any troubleshooting.
Have you asked your server peeps to get involved?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I have moved my sdcard over to my samsung brightside phone. but the videos can not be read. Is there anyone out there whom may have experienced the same issue?

i have moved my sdcard over to my samsung brightside phone,. but the videos can not be read. Is there anyone out there whom may have experienced the same issue? I also tried transferring my files over to my pc first, then reformatted the sdcard, then transferred to the appropriate files back onto the sdcard and put back into samsung.

Thanks for the info SuzyQ. lorsa, the community is correct, pictures and videos can be saved differently on other phones. What phone did you remove the SIM card from? Where did you purchase your SIM card from? Your previous phones SD card and format may not be compatible with your Brightside device. I show you advise that you reformated your memory card but make sure the files are saved correctly. Listed below are the different type of files you can save, receive, and view for pics and videos with your device.
Files that are compatible with the Brightside device:
JPEG (*.jpg, *.jpeg, *.jpe)
BMP (*.bmp)
PNG (*.png)
GIF (*.gif)
3G2 (*.3g2)
3GP (*.3gp)
MPEG4 (*.mpg)
Please let me know if the information above helped with your issue. Please reach out to us if you have any questions or concerns. Make sure you always power cycle periodically. You may also need to peform a hard rest for your phone.
KinquanaH_VZW

Flash videos do not play.

I am using Windows XP Media Center Edition and IE7. I have Flash 10.0.32.18 installed and JavaScript is enabled. I have seperate logons (screen names) for each member of my family. Flash videos will play under the administrators screen name, and when using Firefox under any screen name. When logged on as one of the other screen names, flash videos do not play. In Youtube, this message appears: "Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player." As stated above, this is not the case. It looks to me to be a permissions issue, but I don't where to change those permissions if that is the case.

maybe, you can check the "tools-option" on the internet explorer toolbar. and then enable javasript.

I can play flash videos, just not the ones on AdobeTV

I'm running 64 bit Windows XP, service pack 3. I downloaded the Flash CS5 free trial, and decided to look at the getting started videos. I can watch any flash video I come across on any other site, but for some reason the videos at http://tv.adobe.com/show/learn-flash-professional-cs5/ will not load. I already thought to update my flash player, but I have the latest version and the video still does not play. It shows the buttons at the bottom of the video, and it shows the three dots in the middle of the screen like it's loading, but it just stays that way forever without actually loading!

My bad, I thought the picture would show in the forum. The menu says:
ATVplayer v.2.1.0320
Settings...
Global Settings...
About Adobe Flash Player 10...

Streaming flash video will not play automatically. Must move the mouse off the link

I have 4 computers, all running Win7. On every one, Internet explorer. 2 have firefox 3. 2 have firefox 4. When clicking a link on a website that has live streaming video (flash) - the stream changes to the next one and the video feed begins right away. Works fine on all 4 computers in IE, and in both Firefox 3. The video starts when the mouse is clicked, or when the screen is refreshed. On both computers with firefox4 - the mouse click loads the new feed, but the video hangs on a white screen until the mouse pointer moves. same problem when the feeds are set to auto-rotate. they load every 30 seconds, but unless I physically move the mouse, no video plays (or click the 'next feed' button again, which gives a split-second peek at the video feed I am navigating away from), I need to monitor many security cameras, and this is excruciating. Safe mode does not help. I have the newest versions of everything. please tell me this is a bug and not someone's bright idea

Your code paths are different on the index page video
&streamName=minInvasiveVideo
compared to the absmc page
&streamName=../multimedia/video/ABSMC
"ryonker" <[email protected]> wrote in
message
news:g3esv7$c3r$[email protected]..
> Hi Everyone,
>
> I add a flash video to a page and when I preview it form
DW CS3 and from
> the
> website the video does not appear. I already have one
that is linked on
> the
> homepage but for some reason this additional on will not
play. Here is a
> link
> to the page in question.
>
http://www.ebcardiac.com/multimedia/absmc/absmc.html
>
> Does anyone have any suggestions for getting this to
play? I have others
> that
> I need to add in addition to this one.
>
> Thanks,
> Robert
>

Flash Video Skin Not Loading in Firefox

Hello everyone, I'm having a bit of trouble with a Flash
Video file. I'm helping a friend out by doing some work on his
webpage. He had a video that he wanted to put up on his news page,
so I converted the video to an flv and used the flv player
component to make a video player linked it. I uploaded the skin's
swf file, the player's swf file, and the flv to the same directory.
I made an iframe pointing to the player.swf file in the news
section of the site. I tested it in IE; it works like a charm.
Video loads, skin loads, and it plays etc... but in any version of
firefox, only the video loads and just sits there (autoplay is
off). What can the problem be? Link : (should work in IE, not
FIREFOX
Here .
Once you can recover from the reporter's amusing slack-jawed mug,
please help me out!

Actually, this occurred to me later this afternoon, but I use Gentoo, which normally builds from source (cuz I am hardcore like that). I uninstalled the normal build and reinstalled the prebuilt binary and everything works. I am happy again and just need to play around with the source build options, which I can do later.
Thanks!

Flash videos will not load

So I have a problem loading pretty much any flash videos in
both Firefox and IE. The video will load to a certain point and
then stop, and nothing I do will get it load further, not even
refreshing the page. I have to close out of the browser and get
back to it to have any chance of watching more. On YouTube, I can
sometimes click further on to make it start loading from there, and
even that stops working eventually. It's really, really annoying,
and I'm pretty sure it's something with Flash and not Java. Anyone
else have this?

Uninstall Flash
Download OnyX and run all the checks, maintaince and cleaning aspects and reboot at the end.
http://www.titanium.free.fr/
Reinstall Flash
http://get.adobe.com/flashplayer/
If that doesn't work, create a new user, log into it and see if your issues continue.

Flash video file not loading

Hi,
I'm having a problem getting some flash video files to load.
So far it's affecting 2 files located on these pages:
Martin
O'Brien movie and
John
Gormley movie
The .flv files are being hosted on amazon s3. I have done
several things so far to try to figure out why they aren't loading:
* Having the .swf file in the same folder as the web page
(doesn't work)
* Inserting a different .flv file from a different folder in
amazon s3 (doesn't work)
* Changing file permissions (doesn't work)
* Linking to the .flv file in same manner from a different
site on same ISP (video does work)
* Embedding .swf file in a html file instead of a php file
(doesn't work)
I can only guess that it's something specific to the
www.bmfconferences.com site. As I said i've tried the same .flv
file on a different site with the same ISP (it says Bruce Robinson
but it's the John Gormley video file (
John
Gormley movie on different site) and this works, but I don't
know what else to look for to get the files to work on the bmf
site.
Any help would be much appreciated.
Louise.

Hi All
I found the solution!... I had to add the MIME type .flv =
video/x-flv to my web server (Windows 2003).
Thank anyway
Rit

Flash Videos do not load

I have the following system:
Windows 7 Professional
All up to date updates
Flash player: 11.9.900.152
I want to use google chrome as my main browser- **but let me be clear this issue also happens in the updated IE**
I have updated everything possible, cleared the cache and cookies, turned the windows firewall off, disabled the chrome built in player, disabled every pluggin, tried them one by one, turned off the pop up blocker, tried making exceptions in the pop up blocker and still nothing.
The odd youtube video will play which makes it even more mind boggling...
NFL.com and nhl.com videos do not load whatsoever.
Youtube videos do not load 98% of the time
Any ideas?? please help- losing my mind!

Yes the flash shows up on that link.
see below for a screen shot of one video that recently randomly worked.
that's another thing I don't understand is some of the ads will work as well but then when the video tries to play it says there is an error.
Nfl.com just goes straight to a grey screen if I click to watch a video

Flash Videos do not Operate

To begin with,
The computer is WindowsXP Pro SP2, with fresh NVIDIA GeForce 6600 GT drivers version 295.73, and fresh directx version 9.0c
Firefox is a fresh new install, version 35.0.1 downloaded 2-4-2015 and virus checked
There have been no preferences modified with about:config
The user profile is new, all previous have been abandoned
Adobe Flash has been uninstalled, then reinstalled to the latest version.
All plugins are disabled except OpenH264 1.3, Shockwave Flash 16.0.0.305, and Java SE U75 10.75.2.13
Video players partially load, but video never even begins to play.
I can load up Avant Browser Portable and they work exactly right, on the same computer.
I can load Firefox 35 or 27 or whatever version on a different WindowsXP computer, and then the videos will work.
It is just the XP-Pro system that will never play videos in Firefox. I've tried all that I can think of besides reinstalling Windows itself.
How do I fix this problem?

Hi blebadef,
Thank you for the description and the troubleshooting steps in your question. I understand that Flash video partially load, but do not play, and it only happens on one operating system on the latest version of Firefox and Flash.
On the XP pro computer are your WebGL graphics drivers up to date?
Is the plugin set to click to play? ("Always Ask" would be the setting on the page)
Does it happen when Firefox hardware acceleration is turned off?
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Why are my Flash Videos now not playing for customers outside my Domain?

Hi folks. Please help me out here. I'm using Adobe Connect v.
6 Presenter to develope technology enabled learning. I've published
several Flash Video files to my TEL server, which hosts Connect
v.6. They were able to viewed by students outside my USGS domain
and since about the middle of March, the videos will not start for
them. What the heck? If anyone can help me, I'd be much obliged as
I am do to start beta testing on a Presenter TEL course on May the
8th! Yikes!!
Also, my server is in an Active Directory structure where
Windows Downloads and patches are automatically loaded at a certain
time in the early morning. Not sure if a security patch is doing
this or not, but I would gratefully appreciate any assistance.
Thank you!!

wolfeyes...
Not sure if this is the case...but, by chance, did you change
the videos to a different version of flash? Say converted to flash
8 versus flash mx. I know that in prior versions of connect, you
had to have MX as Flash 8 video wouldn't play...If they're the very
same video files that suddenly aren't playing...then I have no
answer...
Peace.

My Flash Video is not working in my webpage

Could you please tell me what I am doing wrong?
I have dreamweaver CS3
I did use the Media option to insert the Flash Video content in my web page. When viewed in dreamweaver design window I can see the box, if I try to preview it http://www.stmarksavalon.org.au/public_html/pages/resources/TMPdwowk3qayn.php displays a 404 error.
I did upload to the host the .php and related files and try different browsers and does not display even the white space where the video means to appear
The original video format was MP4 I did converted it to FLV using the free software at www.dvdvideosoft.com
I did upload the encoded Flash Video (FLV) and the related files and the webpage
http://www.stmarksavalon.org.au/pages/resources/videos.php
Ta,
Sonia

Hi Melanie,
what I saw first is this:
That means. your *.flv-file is in your DW, ok, BUT, ist it on your server?
And are you really sure, that you did all the required DW-steps? In order you could control this I'll try to describe in detail from the beginning (translated from my German DW):
Create a really new subdirectory (not absolutely necessary, only to see/control the steps).
Create a new html/php-file.
Work in designMode --> Insert Flash-Video.
Search/browse ---> yourFLV.flv
Skin: Halo Skin 3 (min. width 280) ( it was my choice)
width 640 ( it's my choice)
height 480 ( it's my choice)
I clicked all the boxes
---> And now away with all these files below (produced from DW) to your server.
Best you have a look with WIN-Explorer into your directory, to see all the files DW has created in your subdirectory and don't forget one):
YourFlv.flv
YourFlv.htm (or YourFlv.php)
Clear_Skin_1.swf (my choice)
FLVPlayer_Progressive.swf
Could it be, that there is only the "FLVPlayer_Progressive.swf" on your server?
Hans-G.

The flash video can not be loaded. The output may not be proper

Similar Messages

Maybe you are looking for