The flexfield in table-in-table is not fully supported yet

Hi OAF Guys,
while creating requisition, when I select the approver and click on the Next button, the following error is coming.
the flexfield in table-in-table is not fully supported yet
any patch i have to apply for resolving this issue?
I am working on 11.5.10.2 instance
Thanks & Regards
Palakondaiah.u

Probably there is a flexfield component inside a table-in-table and raised this error. You can check the page hierarchy by clicking the "about this page" link.
The error message is a developer mode error, usually it is for developer only. You can turn it off by setingt profile FND: Developer Mode / FND_DEVELOPER_MODE to "No".

Similar Messages

IPod Hi-Fi not fully supporting new iPod classic yet ?

i got my new classic as a replacement for an old gen3 iPod that was never fully supported by my iPod Hi-Fi, because it was already quite old, when the Hi-Fi was released.
now that i have the classic, i was expecting that to be fully supported, meaning the additional menu option 'speaker' should appear, when i dock it into the Hi-Fi, but it doesn't !
instead the light on the Hi-Fi keeps blinking green for a while. it has never done that before with my old iPod. so i checked the manual, but couldn't find an explaination that made any sense ?!
am i expecting too much, or am i doing something wrong ?
otherwise i hope this is something that will be fixed with the first iPod-software-update for the new classics soon ?

First, unplug your HiFi from power for about 5 minutes and then plug it back in and try again. If that doesn't work:
Put the iPod back in the HiFi dock and Reset the iPod (hold down the menu and center buttons for 6 seconds) and see if it fixes your problem.
If it doesn't, try connecting something to the Aux connector on the HiFi and see if you can hear it. If you can, then the dock connector may be damaged on the HiFi and you need to take/send it in for service.
Message was edited by: deggie

How to set the flexfield column in advanced table

Dear All
Dear Gaurav
Good morning
iis it posible to create a flexfield column in advanced table.I am trying it is showing some error......
Thanks& Regards
Sreekanth

Hi,
My doubt is compulsory we give the view instance for flex field,
and also give the view instance for advanced table.
when i created the flex field in advanced table,it didn't ask the view instance.
the advanced table and flex field view instance are different
at that how can i create the flex field in advanced table.

Why I lost all the apps needed to be update in the app store icon while I have not updated them yet? Please help.

I am using iPhone 4, and I had about 50 apps needed to be updated, which is stated in the App Store icon. I have not had time to update them until today. However, when I was ready to update all the apps, I found out that there was not any apps in the App Store icon needed to be update. Does anyone knows why? Please help. Thank you very much!

This morning I had the same issue - even though I have pending updates, the app store badge is gone and it says all apps are up to date. I, like many others I'm sure, selectively update apps based on reviews. I'm sure there is either an app store refresh/update on Apple's end or a run on the app store causing errors or issues.
VZW iPhone 4, iOS 5.0.1

After installing IOS 7.3 my updates stay on the update list and my iiPad will not fully charge after turning my iPad off and leaving it plugged in all night. It only charges 79%.

Why do my recent app updates stay on the update page after updating?
Why won't my iPad take a full charge after installing IOS7.3?

Having the updated apps stay on the Update page in the App Store app is a new feature. It is especially usefu to those that have auto app update turned on. You then have a record of the recently updated apps, the new features they have and when they were updated.
Are you charging your iPad with the wall charger that came with it or by some other means. The wall charger is the best way to charge the iPad. If it is failing to fully charge a reset might help. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Browser Not Fully Supporting App

Hello,
I tried to use an app for the nhs eportfolio which I use for work, but it comes up showing my browser doesn't fully support it so it doesn't work very well.
Is there any update i can use to allow it to run better?
Thanks,
A

Where did you get this app?
Have you asked the developer if they intend to update the app?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

The new Lamb of God album does not fully download all of the songs, DO NOY BUY IT FROM HERE...T

on top of that there is not customer service here

delete the songs you have just purchased from itunes. Then, go to the store and in quick links click on "Purchased". Then find on the top right "Songs not on this computer" (or something similar) and you will find them for download. It's best to download them one at a time and wait for one to complete before moving on to the next one.

Lightroom 3.2 not fully supports the LX5 Raw format ?

I can use the normal Panasonic Lumix Raw files with Lightroom 3.2 just fine.
As soon as I use the LX5 intelligent Zoom feature is LR3.2 (and Camera Raw from CS5) not able to use these files anymore.
Anybody else found this or has a solution - other than not using this feature.

As I understand it the i zoom feature is a processing tool, it either makes a standard image look like a higher resolution one by processing the contour areas, texture areas and smooth areas individually, or it digitally boosts the zoom magnification from 24x to 32x etc. Processing tools may be written into meta data and read by some RAW processors that may emulate this, but on the whole LR ignores them. The exception being the lens correction data written into RAW data by micro fourthirds cameras, so perhaps, Adobe will include this as it does seem they are worked with by micro fourthirds people, (unlike CanoniKon, who seem to work against them!) But for the time being I assume LR would have to ignore it any way as there doesn't exist in LR 3 a tool that does exactly what i zoom and i resolution does on micro fourthirds cameras...
Being a big fan of micro fourthirds machines myself, what's the new LX5 like...it has always been one of the most imaginative of all compacts throughout its life time, I love the LX2 and the 16:9 sensor, but 4:3's is the future for both still and hand-held video photography. Panasonic do some interesting processing stuff and having no software of their own to sell do seem to work closly with Adobe. The new camera profiling tool in LR 3 seems to owe a lot to the processing that goes on inside micro fourthirds cameras to deal with the inherent weaknesses of lenses on small sensors. So I can see the i zoom, i resolution interoperation techniques making there way into LR as well..

I got a factory unlocked iphone4 in istore in chennai, the mobile is not supporting the network and i get a error message in my itune stating that the SIM inserted in this iphone does not appear supported

plz help . .

Then it isn't a factory unlocked iphone. Take it back to the store to have them look at it.

My itunes is not syncing all my photos i am using iphone 5 and the latest version of itunes but the photos that are being displayed are not fully synced

i have latest version of i tunes i.e. 11.2 and OS 7.1.1
but the photos are around 3000 in my laptop n only half of them i.e. 1500 and lesser are being syn to my iphone.
i tried many tyms but the problem remains
plz help me m fed up of installinhg and reinstalling of itunes n resetting my iphone every now and then.

Do you mean Account Settings in iPhone's Facebook app?

Premiere Elements 9 does not fully support AVCHD

Don't believe the reviews such as the one on http://video-editing-software-review.toptenreviews.com/ which state that Adobe Premiere Elements 9 supports AVCHD export to a disk. It DOES NOT!
I happily purchased the product last week based on this review, and what I had thought was a solid brand name solution for editing AVCHD video and rendering it on DVDs. Lo and behold this product only IMPORTS AVCHD - the most popular HD format for consumer video cameras. My export choice is to either settle for low resolution on a DVD or purchase a Blu Ray burner and insanely expensive, Blu Ray disks that are too large for most of my needs if I want any type of HD output.
Why would Adobe produce such a brain dead product so long after AVCHD as been on the market? As a result of my frustration, two days ago I purchased Corel VideoStudio Pro X3 for less money and it does a fabulous job editing and rendering AVCHD on a DVD. Furthermore it SCREAMS compared to the Adobe product.
I would highly recommend that anyone who has an AVCHD HD video camera not purchase this product and look at the Corel software instead.
Am I missing something here?

Thanks everyone for the posts. Although I didn't really ask a question expecting an answer, with all the back and forth reaponses the correct answer is really quite clear. If you want to easily produce HQ quality edited videos on anything other than expensive Blu-Ray disks with an expensive burner then buy a different product. Premiere Elements 9 doesn't do it.
I would HIGHLY recommend Corel VideoStudio Pro X3 for those of you who contributed to the responses to my post. it works great, and with one click you can burn a beautiful high definition edited movie on INEXPENSIVE DVDs. They will play on virtually any of the newer Blu-Ray players, since most support AVCHD, and you don't need tp purchase a Blu Ray burner either.
Hopefully Premiere Elements 10 will get it right. In the mean time does anyone want to but version 9 REALLY cheap? It's worth about as much to me as the salvage value of the plastic that went into the install disc.....

Start playing a video not fully saved yet

Hello,
- what I want to do: Basically, Broadcast a video from a server computer to client computers using JMF as a player.
I tried transmitting the video thought RTP
Problem: the codec needs random access to Media so format not supported or not suitable player blah blah
Solution?_: Should I try to reencode it in supported format and do it again?
I tried sending the video by like 500b packages and start playing it before the file is completed (youtube like)
Problem: Always the same error
Failed to configure: com.sun.media.PlaybackEngine@22ab57
IO exception: BasicPullParser: readBytes(): Reached end of stream while trying to read 4 bytes
Error: Unable to realize com.sun.media.PlaybackEngine@22ab57
FATAL ERROR: Failed to realize: failed to parse the input media.
Exception in thread "JMF thread: SendEventQueue: com.sun.media.content.unknown.Handler" java.lang.Error: Failed to realize: failed to parse the input media.
Solution?_: no clue, I tried quickly to create my player with Manager.createRealizedPlayer(new MediaLocator(Path)); but no success
I don't really know what to do now, does anyone have any clue to help me find a solution?

I tried transmitting the video thought RTP
Problem: the codec needs random access to Media so format not supported or not suitable player blah blah
Solution?_: Should I try to reencode it in supported format and do it again?Ummmm, you shouldn't be receiving that error if the server is loading a video file from disk... but you might look into using a simplier format, RGB-encoded AVIs (for instance)...
I tried sending the video by like 500b packages and start playing it before the file is completed (youtube like)
Problem: Always the same error
Failed to configure: com.sun.media.PlaybackEngine@22ab57
IO exception: BasicPullParser: readBytes(): Reached end of stream while trying to read 4 bytesThat suggests you're not sending the bytes fast enough... Perhaps increasing your package sizes will help with that...
You should DEFINATELY be using a PushBuffer instead of a PullBuffer, because receiving a stream is a push event, not a pull event. Making it a PushBuffer will stop that error from occuring (that error says "I looked for data and there was none", which cannot occur if the Player only looks for data when its DataSource tells it it has data...)

Macbook pro 2012 not fully supporting samsung 4k monitor

hi
I bought the Samsung U28D590 monitor to use it with my Macbook Pro Retina mid 2012 model. though it connected comfortably, but the feel of the screen resolution was very poor. I checked it up with the setting, it showed me "best to fit U28D590 " and also showed 60 hrz. but somwhow, it looked like i was using a normal monitor, never felt like using a 4 k display.
Is something wrong. Need help.

You have posted to an iPad forum, I have requested the mods to relocate your post to a forum that you may get better answers.

Snow Leopard not fully supporting DVD Studio Pro

I've come to realize that the many problems talked about on these support forums lies in the Snow Leopard OS.
I had Leopard on my laptop and did the upgrade to Snow Leopard. No problems.
On my desk top, I had tiger then upgraded to Snow Leopard. No problems.
But recently, I did a fresh install of Snow Leopard on my desk top, and the problems with DVD Studio Pro began happening.
Then I did a Fresh install of Snow Leopard on my laptop, and the same problems began to arise.
Just my observations of the situation.
I am going to reinstall my original Laptop OS and go from there.
This is very frustrating.

I agree.
Whenever I run the Simulator and press the info button to look at the GPRMS it brings up a new window and swiftly becomes unresponsive. I've trashed prefs but I reckon it's got to be Snow Leopard.
Won't be holding my breath for an update any time soon...

Why Apple does not offer support for linux?

We all know the history of Apple. It clearly shows a trend to be open source, excepting for the licenses they share with Microsoft. In my personal case, I love open source because it has solved several of my problems. Just to share this with everyone, I am the network manager of a educational institution and I used to have my servers running on windows platform. Since we used to buy it all from Microsoft, they would give us free software for or labs, software like Visual Studio. They even assigned us engineers to plan everything for our servers, free of cost. Guess what? It was a disaster. We had our database destroyed by an external attack. We were “lucky” to have Microsoft in our servers and in our firewalls.
We had to take action, so I decided to switch to Debian, and to use IPCOP (a great dedicated firewall, if there is anyone interested, the link is: http://ipcop.org/ , please note, I am NOT affiliated with them, and I will receive no compensation or benefit if you chose to access it or not ). Both open source. The result, no external attack has been able to pass trough. After that, we switched most* of our e-learning platforms to open source, and guess what? We are saving over 60,000 yearly just in software. So for those who are looking for a good way to get good security without loosing an eye, try open source.
Now back to the point, I do not fully support any operative system. They all have their good features, or at least they should. The ones I know, are because I use them. My home network is composed by computers running in five different versions of Linux, two running in Mac OS X Tiger, and some others running in XP pro. My main computer is running in Ubuntu, and is really sad to see that there is no software from apple available for Linux. That is honestly the worst part of Linux, having no iTunes or QuickTime available. No way to see multimedia in the web, etc. A suggestion for apple would be, give support for Linux, there are a lot of us wanting the same.

Apple makes software and hardware. Therefore they
offer a total solution. Now they even can have
windows xp running on their hardware. Making a
version of mac os to run on linix isn't practically.
Under a mac is unix and you can run unix software
with the mac so you could do ever thing you are
doing with a mac.
I did not know Linux was one type of computer, like Mac...
Next topic, If I was willing to pay for it, this thread would not exist, because I can actually use a commercial software to adapt the windows web plug ins to Linux... If I was in charge of Apple, I would propose to develop free software support of my products, - plug ins and so - to other operative systems... But of course, even if I did, it would not be up to me. It would have to pass trough several layers of bureaucracy, and it would take a lot of time to be approved or rejected.
Anyway, the main issue is, the three most important OS's are Windows, Linux, and Mac. And that can't be denied. Now you can even run Windows in a Mac PC, and vice versa... besides being fancy, what else could I do with a Mac PC using Windows, when I can build a machine able to run Windows for less than 300 bucks? OK if you want to try a Mac in a i386 or a x86... but I still rather to be the proud owner of a PowerMac G5 than the owner of a Pentium 4 / AMD using Mac OS.
Also, I thought it would be fun to see the reactions and opinions of other people with this topic, hence, I was not expecting anyone from Mac to read it, and really do something about it, because I know they won't.

The flexfield in table-in-table is not fully supported yet

Similar Messages

Maybe you are looking for