The folder is already attached to another index of the same type

Hi,
I deleted an index in the portal and want now to created a new index with the same datasource, I get the following errormessage:
The folder is already attached to another index of the same type: datasourcename
Does anybody have an idea?
BR
Steven

Hi,
make sure you really don't see the index in KM anymore.
If this is the case you could try to delete the index with the TREX Admin Tool on the TREX host. Maybe first just have a look, if on the TREX side the index is still there. This would mean, that in KM the index was deleted but not on TREX.
But you should be sure what you do, when using the admin tool!
Maybe you should also test, if this was just a temporary problem, or if it occurs always when you delete an index.
Deleting an index should work fine from KM and using the admin tool should only be needed for this in rare cases.
Regards,
Sascha

Similar Messages

Please resolve the Error:Element Entry over laps with another entry of the same type

Hi Buddies,
I have been trying to resolve the error : Element Entry over laps with another entry of the same type while entering salary to an employee.
I have tried to resolve this issue by created a new salary basis with new element. But still I could not make it.
Please let me know how to move forward? Thanks for your help.
Thanks
Ganesh kumar M

Hi Ganesh,
We have a similar post which have some recommendation. please go through the comments and check if it helps.
https://forums.oracle.com/thread/2440864
Thanks,
Sanjay

Error: Element entry overlaps with another entry of the same type

Dear,
while entering salary this error comes (Error: Element entry overlaps with another entry of the same type). what should i do for solving this issue? your feed back will be highly appreciated.
REGARDS SAJJAD HASSAN KHAN

Hi,
I have faced the similar issue. And got it resolved after deleting the Element entries made for the employee.
After deleting the similar element I was able to create Salary proposal for the employee.
Please Verify whether any future dated salary proposal are existing for this employee.
Also check if it has similar entries made for the ELEMENT.
Thanks,
Prem

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

Alias tables do not show more than 9 fields of the same type in a Command

Hi there, In Crystal Reports I have a Command to query a database, this works fine and returns what I need,
but in when you add more than 9 alias's and and then Select more thatn 9 fields of the same type it does not show any more them in the Field Exporler window.
i.e. I want to add another alias and select casdet_text(10) but it does not show any more than 9.
Any help woud be apprecitated.
Thanks
casdet_text(1)
casdet_text(2)
casdet_text(3)
casdet_text(4)
casdet_text(5)
casdet_text(6)
casdet_text(7)
casdet_text(8)
casdet_text(8)
casdet_text(9)

Hi James,
It's likely an internal limitation. If you are going to alias all of your fields it's more efficient to use a View or Stored Procedure to handle the renaming server side rather than client side.
It may even be a connection limit, try using another tool and see if you can add more than 9 aliases.
Thank you
Don

Multiple DataSources of the same type (e.g. Peoplesoft Financials) in DAC

If I am definining multiple DataSources of the same type (e.g. Peoplesoft Financials) so as to extract data from multiple source ERP systems into a single DataWarehouse, should I have to define separate Data Source Numbers for each source database ?
I know the preseeded OBIA definitions provide different Data Source Number for Oracle Ebusiness Suite, Peoplesoft etc. But if I have the same ERP application and version in multiple source databases, how do I separate them ? Should I simply edit the Data Source Number and assign a new number to a new source ? Or do I have to copy some templates ?
Referring to Section 3.1.6 of the Oracle Business Intelligence Applications Configuration Guide (7.9.6.1).
Hemant K Chitale

Hemant,
The purpose of DATASOURCE_NUM_ID is to identify which source it's from.
In the Warehouse a combination of Integration_ID and DATASOURCE_NUM_ID defines the uniqueness.
In your case the Source System and Verison is the same so its not required to have different DATSOURCE_NUM_ID
but if for traceability you want to have one it then you can define it.
My advise would be to have one Datsource Num ID as defined for your version and Source System.

To use a Sap Exit variable in a diferent infoobject of the same type

Hi gurus,
I have the Sap Exit standard variable 0P_KEYDT in the infoobject Posting Date (0PSTG_DATE), and i need use this variable with the Document Date (0DOC_DATE), but i don´t have it in the infoobject. Both infoobjects are referenced by 0DATE.
Are there some way to copy the variable from one infoobject to other, or i need make my own exit?
Thanks in advance and regards.

If both of them are the same type means they are referring to 0DATE, then you should be able to access the standard variable defined. What you need to do is, delete the variable and recreate it, but when you recreate the variable don't refer to a characteristic 0PSTG_DATE but refer to date object so that it will be available to all date types.
I will tell you the side effect of doing this, changing the standard definition is always risky because if someone install the object again, then the change you made will be overwritten and hard to know what happened.
thanks.
Wond

Must have the same type and the same length

hi experts,
DELIVERY_PLANT data type STRING    //from proxy class, can't be changed
      BEGIN OF ty_citem,
          article type matnr,
          werks   type werks,
       END OF ty_citem,
LOOP AT it_items INTO lv_item.
    lv_citem-article = lv_item-article.
    lv_citem-werks = lv_item-DELIVERY_PLANT.
    APPEND lv_citem TO GT_citem.
    clear lv_citem.
ENDLOOP.
SELECT matnr werks
       from marc
       into table GT_marc
       for all entries in GT_citem
       where matnr = GT_citem-article and werks = GT_citem-werks.
error message here:When you use the addition "FOR ALL ENTRIES IN itab", the fields "WERKS"
and "GIT_CITEM-WERKS" must have the same type and the same length.

Hi,
You know for statement FOR ALL ENTRIES in where clause data type and length should be match.
As per my understanding ,here GT_citem-werks is a string. But you know data type of WERKS_D is char with lencth 4.
Use the below select statement.
SELECT matnr werks
       from marc
       into table GT_marc
       for all entries in GT_citem
       where matnr = GT_citem-article and werks = GT_citem-werks+0(4).
Thanks.
Subhankar

For each multyple components of the same type?

Hy, thats it, im traying to figure out how to set text property of a bunch of componets that are all the same type in blank but i wont do it like this:
[CODE]comboBox1.text = "";
comboBox2.text = "";
comboBox3.text = "";
comboBox4.text = "";
comboBox5.text = "";[/CODE]
i want to do somthing like this:
[CODE]for each(var combo as combobox) in this{
         combo.text = "";
[/CODE]
this piese of code is just a ficcion just for u to get the idea of what i want to do, obeusly it dont work this way.
TNKSSSSSS....

Try this:
private function toggleStates():void{
    switch (currentState) {
         case null:
         case "state1":
              currentState = "state2";
              setAllBlank();
              break;
         case "state2":
              currentState = "state1";
              break;
         default:
              currentState = "state1";
              break;
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Does it make sense to create more than one repository of the same type?

Hi guys!
Does it make sense to create more than one repository of the same type? Let's say 2 CM repositories?
Thanx for answer!
Peter

Hi Peter,
yes, that makes sense. If you want to use different combinations of repository services you need different repositories. Or if you want to include existing data (e.g. file systems) from different locations. Or if you need to use different backup strategies (RDBMS, file), or ...
BTW, my KM Installation (NW04 SPS9) has <b>23</b> CM repositories by default.
HTH,
Carsten
Message was edited by:
Carsten Buechert

How do i transfer my bookmark toolbar from one computer on which i am running firefox to another computer of the same type that i am running firefox on?

when i installed firefox on my new macbook pro the bookmarks that i had set up in firefox on my old mac book pro did not appear.
How do i transfer these bookmarks to the new computer.

Here's what I do when transferring from one profile to another, on the same computer.
Go to "organize bookmarks", click on "bookmark toolbar", click on any bookmark in that category, click on menu "organize", click "select all", click on "organize" again, click "copy".
Then close firefox, start it again with the other profile, go to "organize bookmarks", click on "bookmark toolbar", click "organize", click "paste".
Now if you are moving to another computer, try save the copied content to a text file and move that text file to the other computer, then use "paste" inside firefox.
Good luck.

The same type and red coercion dot

Hi!
A small project is attached to show how red coercion dot appears if you remove"lib type definition.ctl" from library to a virtual folder. It is interesting that this affects only class property nodes. It does not affect class accessors ("setters") and indicators. The same happens if you move "type definition.ctl" from virtual folder to the library.
Picture shows changes in "vi in library.vi" block diagram.
The application works but a peaceful bad feeling remains ...
There are discussions on this NI forum about typdef controls. It seems that using type definitions can cause serious problems if used together with property nodes. What would be suggested in these cases?
Regards,
Ljubo.
Attachments:
type definition and library.zip ‏69 KB

I can't unfortunately look at your code right now, but there are a couple points to be made:
I'm not sure the problem you show is a bug. Moving the control file out of the library and into a virtual folder in the project changes the type definition because it has a different name.
LV does at times show spurious coersion dots, but I have never seen it cause a functional problem - let alone a serious one.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Any idea why my brand new iPad has the same type of video freeze in Netflix and Hulu?

So while I'm watching netfliix or hulu the video will freeze within 30 seconds. The app won't crash or anything and the timers on both apps just keep going even though the video has totally froze. If I move, skip or rewind even a second the video will continue to play from that spot for another 20 or 30 seconds before doing the same thing. My iPad and both apps are up to date with a wifi thats never experienced any problems whatsoever watching Netflix on multiple computers, iPhones or video game consoles. Anyone have this problem?

Hey adam, any luck? I have the same exact problem and its getting me to the point where I want to return my Ipad because of it. Everything works fine up until I watch about a minute of video and then it freezes and the timer keeps going. I even tried RaddMann's fix and that didnt change anything. Can someone please help or else I am bringing it back!!

Does the MacBook and iPad have the same type of common applications?

I am new to the Apple environment but an advanced user of Windows. I currently teach Senior Citizens how to use a computer with windows. However, there are some seniors that have either a MacBook or iPad and would like to learn how to use them as well. Therefore, I'd like to offer to have a training class that includes both of these products together. Do both products contain the same basic type of applications such as; Mail, Address, Calendar, Photo Booth, iChat, etc...? I know that Safari is the same.
I want to be able to give both types of users a good understanding on how to do things such as; using Mail, surfing the web, etc... I noticed though that sometimes the steps taken to do something on a MacBook is different on an iPad. I would appreciate it if anyone can give me advise on how to approach this type of class.
Thanks,
Marie

Maybe after you have spent time with MacBook Pro, iPhone and iPad yourself and used iOS 5.1 and soon to be iOS 6. Send the students to an Apple Store training seminars. Knowing Windows, maybe prepare students for Windows Metro and Windows tablet or something more familiar.
Even though iOS look and feel has invaded Mountain Lion, they are not the same in any way. In name and looks only is Safari really the same.

My epub file won't open, I've had other files of the same type from apple which have opened in sony reader.

So, I bought a book, and it won't open on reader.
I have bought other books in the past which have opened and hav worhed without any problems, but this oe won't

In your last post here, you also had the same problem with the cover, which I think was due to the CMYK mode settings. Now I have no idea if iBooks doesn't display cover images that are CMYK, but usually images should be RGB (or Grayscale) in EPUB in order for them to display in ADE and Nook.
Are there any other problems in the EPUB, i.e. other than the cover?

The folder is already attached to another index of the same type

Similar Messages

Maybe you are looking for