The following domains are not available.

I've ran into this problem a few times. We have two separate forests with a two-way trust. We have a clustered file server that both forests access.
Randomly I will notice the file server has some issues resolving the names (showing the SID instead) and I can't modify permissions because it prompts this message:
The domain resolves fine from both sides (I have DNS forwarders in each location in place). When I go to domains & trusts on both domain controllers and "VALIDATE" it says everything is fine.
How do I troubleshoot this?

Glad to hear this!
Frank
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

"following domains are not available" error - functionally trusted domains but with same NETBIOS dc computernames giving problems.

For SCOM monitoring and user permissions I am trying to add the Action Account from HQ.local domain to some other domains like DOMAIN1.local, TEST1.local and TEST2.local.
(a trust persists between the domains en HQ.local, and DNS Conditional forwarders are configured to correctly resolve the FQDN DNS names).
Problem is, when adding a user from the HQ.local domain to the Active Directory of the DC's SRVPDC01.DOMAIN1.local or SRVPDC01.TEST1.local domain I get an error:
"The Active Directory Domain Controllers Required to find the selected objects in the following domains are not available:
HQ.local
Ensure the Active Directory Domain Controllers are available, and try to select the objects again."
But when I try to do the same thing, so add user1 from HQ.local to the AD on TESTDC01.TEST2.local…. No error!
The other way around, like adding users from DOMAIN1.local, TEST1.local or TEST2.local to the DC01.HQ.local Active directory… also no error!
To make things even more strange, when I validate the trust with HQ.local… and then try to add user1.HQ.local -> No problem, but only for about 1 minute.. After that
it doesn't recognize user1.HQ.local and only displays some CN=S-1-5... ID of the user. Also when trying to add a new user, I receive the error again.
My guess is that the problem has something to do with the same NETBIOS names of the DC's (server 3 and 4). because authenticating users from HQ.local and TEST2.local
doesn't give me errors and all other domains which have same DC names are giving errors.
(for testing purposes I set-up TESTDC01.TEST2.local with a different DC servername to see if the error persists, and it didn't).
Overview of the servers and situation:
- All server 3, 4 and 5 are on separate Vlan's and have no connectivity among each other. But they do have connectivity to the internet, the HQ.local domain and its servers
DC01 and DC02.
- same firewall settings for each vlan
- even Server 4 and server 5 are on the same Vlan for testing purposes, just to make sure the firewall is not the problem.
Server no.
DC FQDN name
Domain DNS name
1
DC01.HQ.local
HQ.local
2
DC02.HQ.local
HQ.local (secondary DNS)
3
SRVPDC01.DOMAIN1.local
DOMAIN1.local
4
SRVPDC01.TEST1.local
TEST1.local
5
TESTDC01.TEST2.local
TEST2.local
Two-Way Forest Trusts are configured without any problems but here's an overview when the error occurs.
On SRVPDC01.DOMAIN1.local -> adding user1.HQ.local to the AD =
error
On DC01.HQ.local -> adding user1.DOMAIN1.local to the AD = no problem.
On SRVPDC01.TEST1.local -> adding user1.HQ.local to the AD =
error
On DC01.HQ.local -> adding user1.TEST1.local to the AD = no problem.
On TESTDC01.TEST2.local -> adding user1.HQ.local to the AD = no problem.
On DC01.HQ.local -> adding user1.TEST2.local to the AD = no problem.
What are my options to fix this? There must be more possibilities than renaming the DC names.
And why does the problem only occur when adding users in Foreign domain ->from-> HQ.local and not HQ.local ->from-> Foreign domain. Because that's the only
thing I really need: users from HQ.local having permissions in groups of the other domains… :(
Any advise or help would be much appreciated. I've been struggeling with this for a while now and i'm pretty much out of ideas.

Hi aperelli,
On srvpdc01.DOMAIN1.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.hq.local
Result:
C:\Windows\system32>nslookup
DNS request timed out.
    timeout was 2 seconds.
Default Server: UnKnown
Address: ::1
> set type=all
> _ldap._TCP.DC._msdcs.HQ.local
Server: UnKnown
Address: ::1
Non-authoritative answer:
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc01.hq.local
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc02.hq.local
dc01.hq.local internet address = 192.168.1.200
dc02.hq.local internet address = 192.168.1.201
=======================
On srvpdc01.TEST1.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.hq.local
Result:
C:\Windows\system32>nslookup
DNS request timed out.
    timeout was 2 seconds.
Default Server: UnKnown
Address: ::1
> set type=all
> _ldap._TCP.DC._msdcs.HQ.local
Server: UnKnown
Address: ::1
Non-authoritative answer:
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc01.hq.local
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc02.hq.local
dc01.hq.local internet address = 192.168.1.200
dc02.hq.local internet address = 192.168.1.201
=======================
On DC01.HQ.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.domain1.local
Result:
C:\Windows\system32>nslookup
Default Server: dc01.hq.local
Address: 192.168.1.200
> set type=all
> _ldap._tcp.dc._msdcs.domain1.local
Server: dc01.hq.local
Address: 192.168.1.200
Non-authoritative answer:
_ldap._tcp.dc._msdcs.domain1.local      SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = srvpdc01.domain1.local
srvpdc01.domain1.local     internet address = 10.0.113.150
=======================
I have tested port 3268 and 3269 with Port Query UI and ports are listening on alle DC servers.

I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference.

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

Unexpected end of file has occurred. The following elements are not closed

My installation of UPK has decided to stop working with the following error;
Unexpected end of file has occurred. The following elements are not closed: Storage. Line 3, position 1.
We've uninstalled and reinstalled the application and have the same error.
Any insight into this error is apprectiated.
A

Verify from Compatibility between Office 365 MP and Management Server because this issue related to error in MP that you imported. And i think you use below link which is compatible with Management server 2007 R2 cu4 not SCOM 2012 R2
http://www.systemcentercentral.com/scom-monitoring-office-365/
Also you can refer to below link
http://thoughtsonopsmgr.blogspot.com/2011/09/scom-and-office-365.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

The following principals are not known

hello
I am deploying lync 2013 in my environment
when trying to add a user to the chat group I get the following message
"the following principals are not known"
any help
thanks

Hi,there
If you can add some other users to the chat group but only this user,you can check if this user is in a different OU rather than built-in Users OU in AD, I have seen an old
thread report the same error when add a user that is in custom OU fails,if so please check if this OU have RTCUniversalServerReadOnly permissions.
Regards,
Sharon
××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××× Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Photoshop CC OSX 10.6.8 Patterns in the Patterns folder are not available from the fill menu? Any help would be appreciated.

Patterns which do appear in the Adobe Photoshop CC, Preset, Patterns folder are not available as a "Fill" option.
Any help would be appreciated.

Have you repaired the disk permissions?
You might also try resetting the photoshop cc preferences by:
Press and hold the Shift+Command+Option keys while starting photoshop cc
Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
Press Yes because you do.

I just purchased a mac mini and wondered if it's safe to download the Kobo reader app. can I download things from the internet that are not available in the apple store?

I just purchased a mac mini and wondered if it's safe to download from the internet (such as Kobo) that are not available on the app store. It asked me if I was sure it was safe, so it's got me worried.

If you know the sites are OK, then download away.

Darwin.cli : Most of the cli commands are not available

Most of the command lines in 6.1 does not work in vcloud application director 6.1 for example
list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring> create-cloud-tunnel
Command 'create-cloud-tunnel' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring> cliversion
vCloud Automation Center Application Services CLI BUILD 6.1.0-2064245
Copyright (c) 2011-2014 VMwareInc. All rights reserved. This product is protected by U.S.
and international copyright and intellectual property laws.
VMware products are covered by one or more patents listed at http://www.vmware.com/go/patents
spring> display-user
Command 'display-user' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring> list-cloud-tunnels
Command 'list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring>

Thanks for your reply, i used the below command but not enough luck
login --serverUrl https://************:8443/darwin --username admin --password ********** --tenantId gis
According to the documentation here vCloud Application Director 6.0 Documentation Center admin has ROLE_SYSTEM_ADMIN,ROLE_CLOUD_ADMIN,ROLE_CATALOG_ADMIN,ROLE_APP_ARCHITECT,ROLE_DEPLOYER,ROLE_SYSTEM_INTEGRATOR permissions hence i was logging in as admin.
Thanks
Nataraj

Some Of The Following Drivers Are Not Being Inslled On The Notebook

As the topic says, i have an Envy 6 1002TX laptop and in this laptop some of the drivers are not being installed while they are available in the download lists of drivers for the same laptop.
Product Number::B4P24PA#ACJ
OS::Windows 7 Ultimate x64
Here are thelist of Drivers that aren't working:-
1.Intel Smart Connect.
2.Intel turbo Boost.
and the Chipset drivers installation has readme file and installation instructions missing, see this:-

Hi
Please find the link given below might help you to fix your issue. Download both driver chipset and have it checked.
Intel Turbo Boost Technology Driver
Driver Chipset
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

The following options are not there for DTP , why so?

Hi friends,
the following options in DTP for delta are not there ,
only get delta once
get delta by request
Iam using SP7.
plz help me for a turnaround ?
pavan

Only get data once
Hope it Helps
Chetan
@CP..

Trying to make a disc.img from an iMovie project get the mssage that some of the audio clips are not available. The clips still show as green bars in the project but do not play.

I successfully made a disc.img and then burned a DVD of the project but found an error in a title. Went back to the project, corrected the error, and tried to create a new disc.img but got the message that some of the audio tracks were unavailable. They still show as green bars in the project but do not play. Tried deleting and reinstalling them with no success. They do play in iTunes and in the iMovie editing pane
Thank you

inspired2apathy wrote:
... The goal is a ScrollPane that automatically wraps the text inside it. I've just about got it, but I have one thing that's not working. If I just put the JTextArea{s} in as the Editor, then you lose the any text that doesn't fit inside whatever the initial size was. Instead, I put the JTextAreas inside a JScrollPane which works fine, except that I still have to determine the size of the JScrollPane in advance. I would like to make each Editor/JScrollPane start out with just a single line of text and expand until it reaches a certain small number of lines.
... What am I missing?THE BASICS. See if this isn't what you are trying to do.
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
public class Test
public static void main(String[] args) {
    JTextArea ta = new JTextArea();
    ta.setLineWrap(true);
    ta.setWrapStyleWord(true);
    JScrollPane sp = new JScrollPane(ta);
    JFrame f = new JFrame();
    f.getContentPane().add(sp, "Center");
    f.setBounds(0, 0, 400, 300);
    f.setDefaultCloseOperation(f.EXIT_ON_CLOSE);
    f.setVisible(true);
}OP, your code was too long and complicated for me to compile and run. However, aren't you forgetting the two simple methods <tt>JTextArea.setLineWrap()</tt> and <tt>JTextArea.setWrapStyleWord()</tt>? Furthermore, I absolutely see no need for you to extend SWING components for demonstration this simple -- that is, if I understand your problem correctly.

"The following numbers are not eligible to be transferred."

Hi, I'm trying to buy the iPhone 4s on Sprint's network(currently on T-Mobile) and I would like to have my number transferred but everytime I try it gives me that message.
Any ideas on why my number is not eligible for a transfer?
Thanks

There are various reasons why a number would not be able to be ported, so it's useless to speculate. I would recommend either calling Best Buy Mobile or doing this transaction in-store.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc.

I am unable to make an outline from a blank page. The option to choose the outline from the icon on the top of page and the view tab are not available to me.

I just started using Pages and when I try to make an outline from a new blank page I am unable to choose it from the toolbar or the view tab. Please help. Thanks!

drakanamor,
It's possible that you have strayed into the Page Layout section of the Pages templates. Page Layout templates have no Text layer, or frame, in which to show the outline view, so the option is unavaiable.
Choose one of the Word Processing Templates.
Jerry

HT5213 I have two books published to the iBookstore via Blurb. Unfortunately, they just used my first name on the second book. It is like it is by a different author to the first book. -The two books are not linked. Is there anyway I can edit the author's

Hello. I have just joined this community and would be grateful for advice on editing my name submitted to the iBookstore by Blurb on one of my books. I would like to have both of my books with the same author's name. Is it possible? Thank you.

Thank you, Tom. I did contact Blurb support back in March and was told the following:
"We are not able to change the specifications of how Apple Itunes show the author's name on their site.
Apple always have strict specifications of how they set up the Ebook on their site.
This issue can only be solved by contacting Apply and they will not change the name of the site".
I didn't know how or where to contact Apple at that time and gave up. I am resurrecting the issue now as I have seen I have sold some books and would like the people who bought them to learn of my other book.
I am grateful to both Blurb and Apple for making my books possible, but I would like to fix this issue. I will contact Blurb again.
Thanks for your support.

The following domains are not available.

Similar Messages

Maybe you are looking for