The font 'Didot' contains an invalid encoding. Some characters may not display.

I am receiving this message:
"The font 'Didot' contains an invalid encoding. Some characters may not display."
The message appears only in one form, not others. It appears only once, the first time I click on the form after opening it, then not again until I reopen the form.
The font is not embedded in the form and does not exist on my computer. The font is not employed in any field in the form or in its static elements.
Would appreciate any help in getting rid of this very annoying message.

KKKRRRGGG wrote:
I have a 2 page PDF form that is getting this error message every time I open the document.
"The font "HelveticaNeue" contains an invalid encoding. Some characters may not display."
The document has been in use for a year (never having this error message) and needed some updates. All that was changed was the addition of some extra fields and some options in one java script to reflect extra addresses in a drop down menu.
HelveticaNeue was in a PDF layout (from Illustrator) for the background but this variable was removed when I converted all fonts to curves (outlines) and replaced it in to my form. Under Properties>Fonts HelveticaNeue isn't even listed. All fields are Myriad Pro (triple checked) so I cannot understand how it is still an issue. It does not seem to have any impact on the document apart from the error message. It is hard to remove when it does not appear anywhere in the document except for the error message.
I have worked backwards and deleted all java scripts and it is still an issue. I have re-imported the background with active HelveticaNeue fonts and it is still an issue. Deleted any fields that relate to java scripts and it is still an issue. Tearing the hair out.....
Any help would be hugely appreciated as I would prefer to not have to start again from scratch.
Run FontBook and verify the Font. If defective open your System Install CD open Fonts. Drag this font to Desktop.
If you can Remove the defective font by draging to Trash (if system font you'll have to give username and Password) .
Then drag the copy on Finder in same folder dective was removed from
THen Restart Computer with shift key down. Hold down until a screen comes up where you must sign in. wait until screen fully loads. Now try the PDF. If works shut down Acrobat (or Reader) and the restart computer normally.
If this doesn't work do the repair located at: http://support.apple.com/kb/DL1377

Similar Messages

Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly.

I am currently using Adobe Reader version 9.1.3. When I open certain files, it displays the following message, "Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly". Some fonts are actually missing and will not display when printing. I have tried updating adobe but the problem still persists. Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
Cheers
RK

RK7.10.09 wrote:
Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
Cheers
RK
BUT, does it say "embedded" or "embedded subset" next to the font name. If not, the font isn't included in the file and if you don't have it, it can't display or print it.
The file creator will need to embed the fonts properly although "some" fonts don't allow embedding. This could be one of them.

Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

Try Adobe support, that's not a Firefox support issue. <br />
http://forums.adobe.com/index.jspa

Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

This question was previously published but no answer has been found.
Error message is :
"Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
It looks like a Adobe Reader bug because :
- All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
- the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
The solution :
- to publish a 8.1.2 update to fix this important bug
- is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
compliant with all documents generated by third party products.
This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
Thx,
Regards

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

Error Message:"Cannot find or create the font 'WP-MathA'. Some characters may not display or print correctly." Who can help me solve this problem?

Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
Marlen

Hello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks.

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

This Acrobat forum may be a better place to ask: https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs

Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print corr

I have been getting the error....
Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print correctly.
I have tried to look online to figure this out but I have had no luck. If anyone has any suggestions to fix this I would love to hear them. Thanks!

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.
Acrobat X 10.1.10
I am optimizing to create a smaller lores file to email .

I am not trying to remove the font.
I am trying to reduce the size of the file to email.
After optimizing the file this error pops up.
I have tried changing the setting for fonts but no success.

Cannot extract the embedded font"...". Some characters may not display or print co

Been trying to find a solution for this problem that has been rearing its ugly head for years now...
Its definitely related to flattening transparencies, I believe, as it only appears after I click 'APPLY' under the apply to pdf section of the Flattener Preview Dialog.
Im exporting the files as pdfs(interactive) from CS6 Indesign. I then have to flatten the transparencies for the digital addition requirements while leaving the fonts embedded. No problems until I try to Flatten the transparencies. Several files return the same error for a number of fonts.
I've read that could be specific character issues. Font Doctor finds no issues with the fonts in question.
Also getting a similar error regarding character widths.
Others have reinstalled the fonts to no avail.
Does anyone no of a workaround that doesnt require using alternate fonts?
Ive dumped the font cache too. Didnt help.
Thanks for any advice in advance,
KMH

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

Why after exporting PDF to Word some characters are not displaying accurately.

I exported a PDF to Word and it changed the case of some of the characters from upper case to lower case and even changed the font. In some areas the kerning is wonky too. What do I need to do differently?

Very likely you are not needing to change anything. Some variation in output can be found depending on the data structure of the file involved.
Will Adobe ExportPDF convert both text and formatting information?Adobe ExportPDF is capable of exporting high quality information, but the quality of your Word document depends on the quality of the PDF file you start with. For instance, if your PDF file was originally authored in Microsoft Word and converted to PDF using the PDF Maker functionality in Adobe Acrobat® software, your PDF file contains a rich set of information that can be captured by Adobe ExportPDF. This includes relative positioning of tables, images, and even multicolumn text, as well as page, paragraph, and font attributes. If your PDF file was originally authored using simpler PDF generation methods, such as “print to PDF” or “scan to PDF” options, Adobe ExportPDF will convert any recognizable text and then use sophisticated conversion intelligence to preserve as much of the page layout as possible.

Error: The font 'HelveticaNeue-UltraLight' contains an invalid encoding.

Keep getting this warning everytime I open a form I'm working on. "The font 'HelveticaNeue-UltraLight' contains an invalid encoding. Some characters may not display." Have found several threads about this but none with any good answers it seems. Anybody encounter this one yet?
Thanks!

Might have solved it in a round about way. Exported all pages out seperately and then re-assembled them and the error went away.

I recently updated my IOS software on my IPAD with the latest version and now video from some sites does not run. I did not do the update on my other IPAD and the video runs fine. Any idea why.

I have an IPAD 3 and recently updated the IOS software with the latest version and now video from some sites will not display where it did prior to the update. When I go to those same sites on my other IPAD that I did not do the softward update the video still works. Any idea why and what to do to fix it?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
 Cheers, Tom

The folder path "" contains an invalid character - Can't instal Quicktime

Every time i try to upgrade my Quicktime, or try to run iTunes, i get the error message
'The folder path "" contains an invalid character'
Haven't a clue as to what's causing it, or how to solve it.
I have just installed XP again
(Windows XP Profession BrOtHeR's Edition)

Have a new PC now, so don't get this error.

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

The font 'Didot' contains an invalid encoding. Some characters may not display.

Similar Messages

Maybe you are looking for