The " FONT NAME " Font is not available.

Hi,
New here but this issue is grinding my gears.
Is there an easy way to finding out which Paragraph Tags are missing these fonts?
Plan is to update the tags and import tags to other document to resolve the same issue. Any help is appreciated Greatly
Thank You.

You can use the Find and look for the Character formatting (set everything to AsIs using Shift+F8 and then set just the Font Family Name). This will find where the font is used on the Body pages.
However, the font also may be in use on Master and Reference pages as well as in Table format definitions. You could try using the Font pod to replace the missing fonts.

Similar Messages

Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!

Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W.

"The requested resource (/hello) is not available" Error of Servlet

Hello all,
I get HTTP STATUS 404 Error which states "The requested resource (/hello) is not available" even thought according to me I am doing everything perfectly.
Here is more information. If you can find out where the proble might be please
let me know because I am working on this for more than 9 hours.
I AM USING-<br>
TOMCAT 5.5.26 <br>
JRE 6 <br>
J2SDK 1.4.0 <br>
</B>
<BR><BR>
SYSTEM VARIABLES :<br>
<B>
CLASSPATH
</B>
C:\apache-tomcat-5.5.26\common\lib\servlet-api.jar <BR>
<B> JAVA_HOME</B> D:\j2sdk1.4.0
<BR>
<B>JRE_HOME</B> C:\Program Files\Java\jre6
<BR>
<B>TOMCAT_HOME </B>C:\apache-tomcat-5.5.26
<BR>
<P>
I have placed my hello.class file inside
<b>C:\apache-tomcat-5.5.26\webapps\ROOT\WEB-INF\classes</b>
also, i have modified web.xml file as<br>
<b>
<servlet>
<servlet-name>hello</servlet-name>
<servlet-class>hello</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>hello</servlet-name>
<url-pattern>hello</url-pattern>
</servlet-mapping>
</b><br><br>
But still I am not able to access my servlet when i type
http://localhost:8080/hello
I get the error I mentioned above.

Hi..Thanks for all those who have replied earlier. I feel I should add some more information.
I dont know what PACKAGE NAME you are talking about
I am pasting contents of my XML file located in :
**apache-tomcat-5.5.26\webapps\ROOT\WEB-INF\web.xml**
-->
- <web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4">
<display-name>Welcome to Tomcat</display-name>
<description>Welcome to Tomcat</description>
- 
- <servlet>
<servlet-name>org.apache.jsp.index_jsp</servlet-name>
<servlet-class>org.apache.jsp.index_jsp</servlet-class>
</servlet>
- <servlet-mapping>
<servlet-name>org.apache.jsp.index_jsp</servlet-name>
<url-pattern>/index.jsp</url-pattern>
</servlet-mapping>
- 
</web-app>
web.xml file located in
apache-tomcat-5.5.26\webapps\servlets-examples\WEB-INF
is given below:
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<display-name>Servlet 2.4 Examples</display-name>
<description>
Servlet 2.4 Examples.
</description>

<filter>
<filter-name>Servlet Mapped Filter</filter-name>
<filter-class>filters.ExampleFilter</filter-class>
     <init-param>
     <param-name>attribute</param-name>
<param-value>filters.ExampleFilter.SERVLET_MAPPED</param-value>
     </init-param>
</filter>
<filter>
<filter-name>Path Mapped Filter</filter-name>
<filter-class>filters.ExampleFilter</filter-class>
     <init-param>
     <param-name>attribute</param-name>
<param-value>filters.ExampleFilter.PATH_MAPPED</param-value>
     </init-param>
</filter>
<filter>
<filter-name>Request Dumper Filter</filter-name>
<filter-class>filters.RequestDumperFilter</filter-class>
</filter>

<filter>
<filter-name>Set Character Encoding</filter-name>
<filter-class>filters.SetCharacterEncodingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>EUC_JP</param-value>
</init-param>
</filter>
<filter>
<filter-name>Compression Filter</filter-name>
<filter-class>compressionFilters.CompressionFilter</filter-class>
<init-param>
<param-name>compressionThreshold</param-name>
<param-value>10</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>0</param-value>
</init-param>
</filter>

<filter-mapping>
<filter-name>Servlet Mapped Filter</filter-name>
     <servlet-name>invoker</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>Path Mapped Filter</filter-name>
     <url-pattern>/servlet/*</url-pattern>
</filter-mapping>





<listener>
<listener-class>listeners.ContextListener</listener-class>
</listener>
<listener>
<listener-class>listeners.SessionListener</listener-class>
</listener>

<servlet>
<servlet-name>CompressionFilterTestServlet</servlet-name>
<servlet-class>compressionFilters.CompressionFilterTestServlet</servlet
-class>
</servlet>
<servlet>
<servlet-name>hello</servlet-name>
<servlet-class>hello</servlet-class>
</servlet>
</servlet>
<servlet>
<servlet-name>HelloWorldExample</servlet-name>
<servlet-class>HelloWorldExample</servlet-class>
</servlet>
<servlet>
<servlet-name>RequestInfoExample</servlet-name>
<servlet-class>RequestInfoExample</servlet-class>
</servlet>
<servlet>
<servlet-name>RequestHeaderExample</servlet-name>
<servlet-class>RequestHeaderExample</servlet-class>
</servlet>
<servlet>
<servlet-name>RequestParamExample</servlet-name>
<servlet-class>RequestParamExample</servlet-class>
</servlet>
<servlet>
<servlet-name>CookieExample</servlet-name>
<servlet-class>CookieExample</servlet-class>
</servlet>
<servlet>
<servlet-name>SessionExample</servlet-name>
<servlet-class>SessionExample</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>CompressionFilterTestServlet</servlet-name>
<url-pattern>/CompressionTest</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HelloWorldExample</servlet-name>
<url-pattern>/servlet/HelloWorldExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>RequestInfoExample</servlet-name>
<url-pattern>/servlet/RequestInfoExample/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>RequestHeaderExample</servlet-name>
<url-pattern>/servlet/RequestHeaderExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>RequestParamExample</servlet-name>
<url-pattern>/servlet/RequestParamExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>CookieExample</servlet-name>
<url-pattern>/servlet/CookieExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>SessionExample</servlet-name>
<url-pattern>/servlet/SessionExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>hello</servlet-name>
<url-pattern>/servlet/hello</url-pattern>
</servlet-mapping>
<security-constraint>
<display-name>Example Security Constraint</display-name>
<web-resource-collection>
<web-resource-name>Protected Area</web-resource-name>
     
<url-pattern>/jsp/security/protected/*</url-pattern>
     
     <http-method>DELETE</http-method>
<http-method>GET</http-method>
<http-method>POST</http-method>
     <http-method>PUT</http-method>
</web-resource-collection>
<auth-constraint>

<role-name>tomcat</role-name>
     <role-name>role1</role-name>
</auth-constraint>
</security-constraint>

<login-config>
<auth-method>FORM</auth-method>
<realm-name>Example Form-Based Authentication Area</realm-name>
<form-login-config>
<form-login-page>/jsp/security/protected/login.jsp</form-login-page>
<form-error-page>/jsp/security/protected/error.jsp</form-error-page>
</form-login-config>
</login-config>

<security-role>
<role-name>role1</role-name>
</security-role>
<security-role>
<role-name>tomcat</role-name>
</security-role>


<env-entry>
<env-entry-name>minExemptions</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>1</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>foo/name1</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>value1</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>foo/bar/name2</env-entry-name>
<env-entry-type>java.lang.Boolean</env-entry-type>
<env-entry-value>true</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>name3</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>1</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>foo/name4</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>10</env-entry-value>
</env-entry>
</web-app>
My program hello.java is given below
import java.io.*;
import javax.servlet.http.*;
import javax.servlet.*;
public class hello extends HttpServlet {
public void doGet (HttpServletRequest req,
HttpServletResponse res)
throws ServletException, IOException
PrintWriter out = res.getWriter();
out.println("Hello, world!");
out.close();
}

The requested resource (/Webtest) is not available.

--context.xml--
<Context path="/WebApplication1">
<ResourceLink global="jdbc/myoracle2" name="jdbc/myoracle2" type="javax.sql.DataSource"/>
</Context>
---web.xml---
<servlet>
        <servlet-name>WebServlet</servlet-name>
        <servlet-class>WebServlet</servlet-class>
    </servlet>
<servlet-mapping>
        <servlet-name>WebServlet</servlet-name>
        <url-pattern>/WebServlet</url-pattern>
    </servlet-mapping>
----HTML-----
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY BGCOLOR="WHITE">
<TABLE BORDER="2" CELLPADDING="2">
<TR><TD WIDTH="275">
<FORM METHOD="POST" ACTION="/Webtest">
<p>
<INPUT NAME="ADMIN_USERNAME" TYPE="TEXT" id="ADMIN_USERNAME" SIZE=30>
</p>
<p>
<INPUT NAME="ADMIN_PASSWORD" TYPE="TEXT" id="ADMIN_PASSWORD" SIZE=30>
</p>
<P>
<INPUT TYPE="SUBMIT" VALUE="Click Me">
<INPUT TYPE="RESET">
</FORM>
</TD></TR>
</TABLE>
</BODY>
</HTML>
----JAVA SERVLET-----
import java.sql.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Webtest
extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException,
IOException {
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
String sourceURL = "jdbc/myoracle2";
Connection databaseConnection = DriverManager.getConnection(sourceURL);
Statement stmt = databaseConnection.createStatement();
String jname = request.getParameter("ADMIN_USERNAME");
String jemail = request.getParameter("ADMIN_PASSWORD");
String sqlInsertString ="INSERT INTO administrator (ADMIN_USERNAME,ADMIN_PASSWORD) VALUES ('" + jname +"', '" +jemail + "')";
stmt.executeUpdate(sqlInsertString);
databaseConnection.commit();
databaseConnection.close();
catch(ClassNotFoundException cnfe)
System.err.println("Error loading Driver");
catch (SQLException sqle){
System.err.println("SQL Error");
[/code
can you help me. above example code has error message, the requested resource /webtest is not available... I do not know where is problem. but I am sure that database connection is o.k. I already test other example.
thank you so much
Message was edited by:
        jin412

there is no problem to retrieve data from database.
but I have a problem to add the record.Does it generate an exception? Try adding a line to print the stack trace in the exception block.
sqle.printStackTrace();

The requested resource (/Admin) is not available.

Hello ,
I am developing one small project. I am using struts,EJB and Hibernate to develop this project.
My project name is Admin. It has two sub-modules:- AdminWeb and AdminEJB.
In the sub-module AdminWeb, i am writing all the struts related stuff like Action classes,form bean classes, I have struts-config inside WEB-INF folder along with web.xml and other tlds. From the action class i am takinf the lookup of session bean which is in the another sub-module name as AdminEJB. and invoking the business method from of that bean class.
In the sub-module AdminEJB, I wrote all my Home Interface, Remote Interface and Session Bean class.From the session bean class i am firing a HQL query to interact with Database. I create Hibernate.cfg.xml and also mapping xml file needed to map with the database.Then i created ejb-jar.xml file.
I created EAR file name as Admin. And deployed in My JBoss server.
Now when i am running my project from web browser. then the following message is coming on the screen:-
The requested resource (/Admin) is not available.
Can anyone help me plz to recitify this problem.
Thanks with regard,
sanjay Kumar

Hello Again ,
The below the stack
16:13:59,189 INFO [StdSchedulerFactory] Quartz scheduler version: 1.5.2
16:13:59,189 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED started.
16:14:00,439 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS'
16:14:01,017 INFO [A] Bound to JNDI name: queue/A
16:14:01,017 INFO Bound to JNDI name: queue/B
16:14:01,033 INFO [C] Bound to JNDI name: queue/C
16:14:01,033 INFO [D] Bound to JNDI name: queue/D
16:14:01,033 INFO [ex] Bound to JNDI name: queue/ex
16:14:01,064 INFO [testTopic] Bound to JNDI name: topic/testTopic
16:14:01,064 INFO [securedTopic] Bound to JNDI name: topic/securedTopic
16:14:01,064 INFO [testDurableTopic] Bound to JNDI name: topic/testDurableTopic
16:14:01,064 INFO [testQueue] Bound to JNDI name: queue/testQueue
16:14:01,142 INFO [UILServerILService] JBossMQ UIL service available at : /127.0.0.1:8093
16:14:01,189 INFO [DLQ] Bound to JNDI name: queue/DLQ
16:14:01,439 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA'
16:14:01,611 INFO [WrapperDataSourceService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=MyOracleDS' to JNDI name 'MyOracleDS'
16:14:01,705 INFO [TomcatDeployer] deploy, ctxPath=/jmx-console, warUrl=.../deploy/jmx-console.war/
16:14:03,220 INFO [EARDeployer] Init J2EE application: file:/E:/jboss-4.2.1/server/default/deploy/Admin.ear
16:14:22,250 INFO [EjbModule] Deploying DiscountDetailBean
16:14:22,688 INFO [ProxyFactory] Bound EJB Home 'DiscountDetailBean' to jndi 'Holiday_Cottage_Group/AdminEjb/ejbModule/com/discountEjbs/InsertDiscountDetailHome'
16:14:22,688 INFO [EJBDeployer] Deployed: file:/E:/jboss-4.2.1/server/default/tmp/deploy/tmp62976Admin.ear-contents/AdminEJB.jar
16:14:22,719 INFO [TomcatDeployer] deploy, ctxPath=/AdminWeb, warUrl=.../tmp/deploy/tmp62976Admin.ear-contents/AdminWeb-exp.war/
16:14:22,891 INFO [WebappClassLoader] validateJarFile(E:\jboss-4.2.1\server\default\.\tmp\deploy\tmp62976Admin.ear-contents\AdminWeb-exp.war\WEB-INF\lib\javax.servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
16:14:22,922 INFO [WebappClassLoader] validateJarFile(E:\jboss-4.2.1\server\default\.\tmp\deploy\tmp62976Admin.ear-contents\AdminWeb-exp.war\WEB-INF\lib\servlet-api.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
16:14:23,578 INFO [EARDeployer] Started J2EE application: file:/E:/jboss-4.2.1/server/default/deploy/Admin.ear
16:14:23,719 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-127.0.0.1-8080
16:14:23,750 INFO [AjpProtocol] Starting Coyote AJP/1.3 on ajp-127.0.0.1-8009
16:14:23,766 INFO [Server] JBoss (MX MicroKernel) [4.2.1.GA (build: SVNTag=JBoss_4_2_1_GA date=200707131605)] Started in 50s:810ms
Thanks with regards,
Sanjay Kumar

The requested resource (/ShowParameters) is not available.

hi
hope someone can help me cause i'm looking for hours and cannot find my error :(
I use a from.jsp with the following action:
<form action="/ShowParameters" method="post">as soon as i click on the submit button i do get the following error message:
The requested resource (/ShowParameters) is not available.I structured my tomcat webapp as followed:
webapp called test:
webapp\test\form.jsp
webapp\test\WEB-INF\web.xml
webapp\test\WEB-INF\classes\coreservlets\ShowParamaters.class
my web.xml:
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4">
     <servlet>
          <servlet-name>ShowParameters</servlet-name>
          <servlet-class>coreservlets.ShowParameters</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>ShowParameters</servlet-name>
          <url-pattern>/ShowParameters</url-pattern>
     </servlet-mapping>
</web-app>and finally my ShowParameters.java
package coreservlets;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
public class ShowParameters extends HttpServlet {
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
      throws ServletException, IOException {
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    String title = "Reading All Request Parameters";
    out.println(ServletUtilities.headWithTitle(title) +
                "<BODY BGCOLOR=\"#FDF5E6\">\n" +
                "<H1 ALIGN=CENTER>" + title + "</H1>\n" +
                "<TABLE BORDER=1 ALIGN=CENTER>\n" +
                "<TR BGCOLOR=\"#FFAD00\">\n" +
                "<TH>Parameter Name<TH>Parameter Value(s)");
    Enumeration paramNames = request.getParameterNames();
    while(paramNames.hasMoreElements()) {
      String paramName = (String)paramNames.nextElement();
      out.print("<TR><TD>" + paramName + "\n<TD>");
      String[] paramValues =
        request.getParameterValues(paramName);
      if (paramValues.length == 1) {
        String paramValue = paramValues[0];
        if (paramValue.length() == 0)
          out.println("<I>No Value</I>");
        else
          out.println(paramValue);
      } else {
        out.println("<UL>");
        for(int i=0; i<paramValues.length; i++) {
          out.println("<LI>" + paramValues);
out.println("</UL>");
out.println("</TABLE>\n</BODY></HTML>");
public void doPost(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
doGet(request, response);
so that's my simple webapp but still i cannot find the error :(
another questions: in general, would you suggest to use a controller.jsp instead of the servlet?

hi
1) i compiled the .java by using eclipse and did not get any error message
2) my directory structure:
webapp\test\form.jsp
webapp\test\WEB-INF\web.xml
webapp\test\WEB-INF\classes\coreservlets\ShowParamaters.class
webapp\test\WEB-INF\classes\coreservlets\ServletUtitlities.class
do i have to add the ServletUtilities.class also in the web.xml?
thanks for helping cannot find any error :(

The BPM application server is not available

Hello there
I have installed and configured Aqualogic Enterprise for
Weblogic from scratch following the manual http://edocs.bea.com/albsi/docs57/adminguide/index.html.
I have my weblogic server started and have started servicing all requests for wlj2eedeployer.
But when i click on the leaf button for my engine ear or any ear in Engines/EditEngine/J2EE Application server files,the install icon is not coming.The BPM application server is not available is the message displayed.Please help.

yup.I can see the hiperspace with my processes in it.
As you said i installed and configured from scratch.
But when i click on the process application
"Component execution error.
Note: In order to send the administrator the information he needs to solve this problem, complete the following steps:
With the error message still displayed in your browser, go to the File menu of the browser and select the option 'save as'.
A dialog to choose the directory where to save the file will be displayed. Browse until you get to the directory which you would like to save the page with error.
Give the file a name and click 'save'. By doing this, you are saving the error message to a file from which the administrator can identify the problem by looking at its code" is getting displayed.I tried the sample hello world process also.I got the same error.But am very happy that i can view my processes.thanks for all the help.

The usage monitor is currently not available

BT.com message...
"The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
Well, finally BT's complete lack of ability to manage their core business is paying off.....can download/will download.....FANTASTIC!!!
And if you aren't affected by this and Do go over your limit...I'd complain to ofcom....you can't treat one customer one way and another a more preferential way....
Oh, and if you pay for anything more than 10MB download per month, I'd also ask for a discount......
Thank you BT...may your utter incompetence reign supreme forever....
All hail the God of failure...yes, Mr Buckley...I'm genuflecting in YOUR direction!!!

Hi Guys,
Thanks for raising this. I am sorry that you are having problems with the usage monitor. I would like to sort this out.
Can I ask that anyone having issues, Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

ConnectionException: Name space accessor for the java: name space has not b

Hi,
While running JUnti test cases I am getting the following. Can anyone help?
com.deere.u90.iaf.jdbc.connection.ConnectionException: Name space accessor for the java: name space has not been set. Possible cause is that the user is specifying a java: URL name in a JNDI Context method call but is not running in a J2EE client or server environment.
IAF JDBC Connection Management Framework exception in JNDI lookup of DataSource.
Source of configuration data = C:\starteam\JDPS - Software Delivery system\3123_CanDB\sds\WebContent\WEB-INF\classes\config\SDSConnectionManagerLocal.properties
Dynamic Properties = false
Property Name Suffix = SDS
Connection Pooling Enabled = true
JNDI Provider URL = corbaloc:iiop:wpuds90700.jdnet.deere.com:2811
DataSource Name = java:comp/env/jdbc/SDSDEVLDataSource
     at com.deere.u90.iaf.jdbc.connection.ConnectionManager.initializeEnvironment(ConnectionManager.java:282)
     at com.deere.u90.iaf.jdbc.connection.ConnectionManager.<init>(ConnectionManager.java:224)
     at sds.view.intranet.servlets.SDSGenericServlet.getConnectionManager(SDSGenericServlet.java:192)
     at junittest.ProgrammedECUAddComponentTest.setUp(ProgrammedECUAddComponentTest.java:75)
     at junit.framework.TestCase.runBare(TestCase.java:125)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:392)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:276)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:167)
Thanks in advance,
Dhir

I also get the same problem, this is very tedious but if you edit the song somehow and re-save it then it will copy. Not sure what the problem is at all, tried contacting Apple about this to no avail.

When trying to back up to a WD My Passport I get a message that says the back up disk is not available. Any ideas?

When trying to back up to a WD My Passport I get a message that says the back up disk is not available. Any ideas?

Find and run the Disk Utility program. In the list on the left side of the program window you should see two hard drives - the internal Mac drive and one labeled with Western Digital's name. (Not exactly sure how the WD drives appear.) Under each of those drives there will be another indented drive name. See picture below.
If you don't see two drives there's your problem - for some reason the Mac doesn't recognize that there's an external drive plugged in. Check cables, etc.
More than likely though you will see the two drives. See how in the picture I've selected the indented drive icon? Do the same for your WD drive. Now look at the bottom where it says Format. To use TimeMachine your format needs to be Mac OS Extended (journaled) and I'm betting it doesn't. After you've done that TM will be able to use the drive.

Office 2013 and SharePoint 2013 server properties - The required term set is not available.

Hi,
After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
There is a two-way trust btw domains.
SPNs are done for AppPools.
AppPool accounts have delegations and are set to impersonate with GPO.
SharePoint Web Application is on kerberos authentication.
There is no difference when sites are using user or resource domain AppPool accounts.
The WFE and SQL Server have computer delegations.
Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
Last things on IIS log are:
2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
What I missed.
Br,
-timo-

Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
More troubleshooting can be found here:
iOS: Troubleshooting Wi-Fi networks and connections

The File name property is not valid. The file name is a device or contains invalid characters

I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing.
Issue:
The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination.
The path and name of the raw file is passed to each of the data flows via the same variable.
The raw file resides in a folder on the server in the same path that the dtsx resides in.
The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
What we have done to troubleshoot:
1. I ran the task successfully on my local machine so it is definitely a server issue.
2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always".
3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
6. The dba looked at the directory and the account that performs the task has full control.
7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
Summary:
The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

Hi Whalensdad,
Based on my research, the issue can be caused by the following reasons:
There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
May be it changes to others at run time.
The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

I updated to Yosemite. iPhoto says I need to update to the latest version. The app store says the version I need is not available in the US. Thus iPhoto won't work or even open at this point

I updated to the yosemite system. My iPhoto says I need to update to the latest version for it to work with yosemite. The app store searches and then states the version I need is not available in the US. Currently I cannot use iPhoto. Suggestions?

Csound1,
Thanks for the hint about not emptying the trash. I will try to work on this tonight or tomorrow morning and let you know if "this helped me".
Russell,
If you go into the iLife support forum for iPhoto, there are a couple good threads. Basically, iPhoto can't be downloaded by anyone anywhere in the world unless the app store has it listed in your "purchases" list. The threads contain a lot of steps and it looks like this could be difficult for novices like me.
Rysz,
I will also look at the link you provided before I get started. Thanks.

The " FONT NAME " Font is not available.

Similar Messages

Maybe you are looking for