The forgotton estate(s) 2013 & no fixed line Broadband ! Why ?

 Glanmire is a large town situated 6 kilometres outside Cork city.Glanmire has a population of 16,000 + people. I have a house in Elmgrove,Sallybrook,Glanmire,Cork.  There are over 150 houses in the estate.There are two other estates in close proximity. Barrymore Estate (200 houses) & Millbrook ( 100 houses)
 https://maps.google.ie/maps?q=1+elmgrove,sallybrook&hl=en&ll=51.943775,-8.395314&spn=0.007037,0.021136&sll=51.941302,-8.394606&sspn=0.007037,0.021136&hnear=1+Elmgrove,+Glanmire,+County+Cork&t=m&z=16
 We have no fixed line broadband. 
 At least 450 houses are screaming out for fixed line broadband. Its not like we are living out in the middle of nowhere!
I was told years ago the the extange has to be upgraded.
 I got hopeful latley when i saw kn networks laying cables on the main road at the entrance of our estate.
I have heard since that the houses across the road from our estate has fixed line.
 Phoning eircom enquiring on "when" has been a waste of time.
 My neighbours and i feel we have been overlooked and forgotton about.
 I have read other posts from eircom customers and am impressed with your honestly & helpful advise.
 ************************************* HELP***************************************************************
 You are our only hope. If you could answer 2 questions for me i would be very grateful.
 1.  Why
2. When
 (If it helps , the markings on the eircom box are " S B K 1,  M D F)
 Kind Regards,
 Cashy
   

 Hi Mark, Thanks for your reply. The details I used in signing up to this forum is from 1 of 2 houses that I own.The details I used are from a house in the country miles from the Cork city.(Carraignavar). That house has broadband. The other house is the one that I am seeking information on.Its in Elmgrove,Sallybrook,Glanmire,Cork. I included a link of the exact location in my first post. This house is just outside Cork city and is in the middle of 3 large estates of about 500 houses and has absolutely no fixed-line broadband whatsoever. The markings on the exchange box are  SBK1  MDF We arena looking for NGB or efibre.   Just fixed-line broadband will do. All the surrounding areas of Glanmire have broadband. All except the 3 estates I mentioned in my 1st post. 1. Millbrook Estate, Sallybrook, Glanmire, Cork2. Barrymore Estate, Sallybrook, Glanmire, Cork3. Elmgrove Estate, Sallybrook, Glanmire Cork You said in your reply "From existing network / exchange capability to existing to possible customer base"Does this mean that is must be worthwhile for eircom to upgrade the network/exchange  ?The above estates have roughly 500 houses in them.Surely those figures alone would justify upgrading. The reason I titled the subject " The forgotten estates" is because I truly believe we have been forgotten about. All of the surrounding areas can receive eircom fixed line broadband. All except us. You also said in your reply "I am afraid there is no process to escalate or expedite a request for an exchange to be upgraded broadband"If you cant escalate or expedite a request for an upgrade, can you at least find out why we haven been upgraded already when all the surrounding areas have. All except us Supply & demand ?  There is demand from over 500 houses. I really think that this matter needs to be brought to the attention of somebody that can make decisions in eircom as I'm sure if they heard about it, they would find it hard to explain.  We aren't looking for NGB or efibre.   Just fixedline broadband will do.  Id appreciate any help or information. Kind Regards, Cashy     

Similar Messages

  • The safety site never tick auto fix ID andPasswords, why my security trading ac. still can auto fix my user ID.how to clear it, please teaching me to fix this problem.THANK YOU.

    M y firefox 10.0.2The safety site never tick auto fix ID andPasswords, why my security trading ac. still can auto fix my user ID.how to clear it, please teaching me to fix this problem.THANK YOU.

    http://www.omahapokernews.org
    http://www.holdempokernews.org
    http://www.7cardstudplay.net
    http://www.5cardstudplay.net
    http://www.holdemspot.org
    http://www.texasholdemstate.net
    http://www.texasholdemstate.com
    http://www.pokerbonuslist.net
    http://www.pokerdownloadz.org
    http://www.signuppoker.net
    http://www.tournamentpokerz.com
    http://www.pokercalculatorz.com
    http://www.omahaodds.org
    http://www.omahaouts.org
    http://www.texasholdemrulesonline.net
    http://www.onlineholdemtips.com
    http://www.pokerhilo.net
    http://www.poker-hilo.com
    http://www.hilopokers.com
    http://www.nolimit-holdempoker.net
    http://www.texasholdemlimits.org
    http://www.texasholdemlimits.net
    http://www.onlinepokerlimits.org
    http://www.onlinepokerlimits.net
    http://www.onlinepokerlimits.com
    http://www.texasholdemlimits.com
    http://www.7cardplayer.net
    http://www.5cardplayer.net
    http://www.omahaacademy.org
    http://www.omahapokerrooms.net
    http://www.onlinepokerroomstop.net
    http://www.playpoker-toppokerrooms.com
    http://www.texasholdemz.com
    http://www.playpokeronline-casinos.com
    http://www.texasholdem-vip.com
    http://www.gamble-poker-holdem.com
    http://www.playpoker-holdem.com
    http://www.onlinetexasholdem-poker.com
    http://www.texasholdempokeracademy.com
    http://www.vip-texasholdem.com
    http://www.playfree-poker-online.com
    http://www.texasholdem-pokerrooms.org
    http://www.toppokerrooms.ws
    http://www.toppokercasino.ws
    http://www.onlinepokercasino.ws
    http://www.playpoker-online.ws
    http://www.online-texasholdem.ws
    http://www.play-texas-holdem.ws
    http://www.internet-texas-holdem-poker.ws
    http://www.poker-player.ws
    http://www.luckyschool.com

  • The odds of BT not screwing up line/broadband move...

    Have ordered a move, phone line and broadband, same exchange, to a new office a mile away. Originally placed the order OK, then had to change the date. Was on hold 22 minutes (gave up), and 30 minutes (got through) before I could give them the new date. Was originally told it would be free, am now told it will be £99. Was told it would all be done on the same day at the same time. Am now told it could be 5 working days after phone lines moves before broadband moves. I also have the nasty feeling that this move ties me into BT for another few years. Since booking this I've had cold-calls from BT trying to flog me a website I don't need, an advisor in an Indian call centre call with info I already had, and someone 'returning your call' when I requested no such thing. I offered £10 to a charity of BT's choice if they could complete this simple order without screwing up. They declined. I have a nasty feeling that in 2 weeks time I will be without phone, net, and in the hands of the BT machine...
    BT - If someone, anyone, is reading this. Lax service KILLS small businesses like mine, make the effort, pleeeeease !

    Hi Frustrated-of-Leics,
    First of all, welcome to the forum.
    By the sound of it your service is with BT Business so they'll be able to take a look at your order and see what's going on, check out the BT Business Forum for help.
    If the account is not business drop me an email instead and I'll be able to see what's going on with it, simply click on my profile and check under "about me" for the mods' email address. I'll need your forum username and BT account details.
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • Is it possible to display fixed lines in the candlestick chart ?

    Hi,
    I have a nice candlestick flash chart using AnyChart integration kit.
    I would like to display 3 lines in this chart, they are as follow and they return one value each :
    SELECT SEUIL_HAUT FROM SITE_ECHELLE WHERE SITE = :p184_ename
    SELECT SEUIL_BAS FROM SITE_ECHELLE WHERE SITE = :p184_ename
    SELECT SEUIL_ALERTE FROM SITE_ECHELLE WHERE SITE = :p184_ename
    You know these line represents limits.
    I tried to add these values in the request below but nothing would appear. Do you have an idea how I could display these fixed lines ?
    DECLARE
    X VARCHAR2 (4000);
    BEGIN
    x := 'With S1 as (
    SELECT DATE1, round(avg(VALEUR),2) OPEN, NVL(ROUND(MAX(Valeur),2), 0) HIGH,
           NVL(ROUND(MIN(Valeur),2), 0) LOW,
           NVL(ROUND(AVG(Valeur),2), 0) CLOSE
    FROM   EVV_'||:P184_ENAME||'
    WHERE  DATE1 BETWEEN
           TO_DATE('''||:P8_DATE_DEBUT||'000000'', ''DD/MM/YYYYHH24MISS'') AND
           TO_DATE('''||:P8_DATE_FIN||'235959'', ''DD/MM/YYYYHH24MISS'') AND
           CLEF_VAR = (SELECT CLEF_VAR FROM SITE_ECHELLE WHERE
                       SITE = '''||:P184_ENAME||''')
           group by date1)
    Select NULL LINK,
           to_char(n, ''DD/MM/YY HH24:MI''),
          NVL(ROUND(AVG(OPEN),2), 0) OPEN,
           nvl(round(max(HIGH),2), 0) HIGH,
           nvl(round(min(LOW),2), 0) LOW,
           NVL(ROUND(AVG(CLOSE),2), 0) CLOSE
    FROM   (select to_date('''||:P8_DATE_DEBUT||''',''DD/MM/YYYY'') + (level-1)/
    TO_NUMBER('''||:P8_ECHELLE||''') n
    from dual  connect by level <=
      (select (to_date('''||:P8_DATE_FIN||''',''DD/MM/YYYY'')+ 1 - to_date('''||:P8_DATE_DEBUT||''',''DD/MM/YYYY'')) * TO_NUMBER('''||:P8_ECHELLE||''')
    from dual
      )) days
            LEFT JOIN s1 ON days.n = trunc(date1,'''||:P8_TRUNC||''')
    GROUP BY n
    order by n';
    RETURN (X);
    END;Thank you for your kind help.
    Christian

    Hello, Jacky, thanks a lot for your answer.
    This is not exactly what I was thinking about:
    I want that the planners can be informed in the BPS planning layout about about e.g. the date when material is available again.
    There should be a text saying: "Material xyz is not available until Oct 1st, 2008"
    Additionally, the user should have the opportunity to give comments on their planning data.
    Any idea?
    Thanks and best regards
    Gerd

  • I am trying to get a good copy of my home video on DVD using IDVD.  On editing the video all the viewing screens show the video perfectly in HD.  When I burn the video to DVD all the end results are buzzy with squiggly lines.  Any fix?  Thanks?

    I am trying to get a good copy of my home video on DVD using IDVD.  On editing the video all the viewing screens show the video perfectly in HD.  When I burn the video to DVD all the end results are buzzy with squiggly lines.  Any fix?  Thanks?

    Hi
    There are several layers to this Q
    A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
    iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
    B. DVD can be better or worse
    • Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
    • Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
    • Using Right encoder quality depending on movie and Manu duration is very important
    • Use of high quality brand of DVD - is important - I use Verbatim DVD-R
    • Type of DVD - DVD-R plays on more DVD-Players (even old ones)
    • Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
    • I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
    • What You feed iDVD does matter
    Video codecs
    Audio file formats
    Photo file formats
    Yours Bengt W

  • My ical works ok except when I open the month of March 2013 it crashes/closes. All other month work, even into the future. How can I fix this?

    My ical on ipad 3 works fine except when I open the month of March 2013 it crashes/closes down immediately. All other months work, even into the future. Even Feb and April etc. in 2013. How can I fix?

    I understand it's a glitch. If you have any events on april 1 2012 i believe,t hat's an all day app, delete it or make it for just a period of time, not all day.
    I think it has something to do with daylight savings time (but don't quote me on that) with the conflict betwen 'all day' and the ipad trying to figure out how long 'all day' is with that whole spring forward and lose an hour. removing any 'all day' appointments seem to remove that conflict.

  • How To Register For a New eFax Account on the Photosmart eStation

    If you ever find yourself unable to log in to your eFax account and you have contacted HP Technical Support and eFax only to find the problem cannot be fixed by either party, there is a way to register for a different account but the only way to do this involves using a Photosmart eStation.  The error you may get will read "Invalid Login" and is only applicable on the Photosmart eStation, HP Envy Series, and the Photosmart 7510 regardless of whether you are trying to create a new account or just access one that already exists, here are the steps to fix that:
    1. Go to www.efax.com and sign in. 
    2. Select "Update Account" and then select the profile tab.
    3. Change the current contact email to a dummy/alternate email (must have a phone number listed on this page before changes will go into effect).
         a) Using the @hpeprint.com email may cause problems.
         b) Log out of eFax account.
    4. Go to the E-station and follow these instructions to be able to register for a new account:
         a) On the top of the E-station, select the 3rd Menu button (3 lines) and go to
         b) Select Settings then
         c) Tools then
         d) Advanced then
         e) Applications and
         f) Manage Applications
         g) next Filter > select All and wait for all the apps to load.
         h) Scroll down to very bottom for Webfax
         i) and then Clear Data in this section
         j) Select the Home button at the top and
         k) Select Efax and register for a new account with a preferred email and zip code
         l) Write down the new phone number and check your email for a new 4-digit PIN
    5. Repeat these steps to clear the Web Fax data and then try to login to efax.com on the printer by selecting
         a) eFax button
         b) Settings
         c) Account and upgrade information
         d) Change
         e) After selecting chance, in this area, login to eFax on the printer with the new number and pin.
    6. The best test to ensure everything is working now is to send yourself an eFax so you can check for incoming and outgoing processes to be just as you expect it to be.
    7. Print the ePrint info page so that the printer's ePrint email address will be associated with the new eFax account.
    And that is the trick on how to get a new eFax account if you are experiencing issues with signing in from the front panel of the printer.  If you do not have access to a Photosmart eStation, then contact HP Cloud Services at 1-855-785-2777 if you live in North America or are an English-speaking customer for assistance with this step.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

    Here is a picture of the Photosmart eStation:
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • I can not uninstall Office 2013 from command line

    Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this:
    <Configuration Product=”ProPlus”>
    <Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
    </Configuration>
    From command line the following will not work:
    setup /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
    Error: Setup can not find or validate an installation file. Please try reinstalling Office . . .
    setup /uninstall ProPlus gives me GUI to continue process - it seems /config .\ProPlus.ww\Uninstall.xml part does not work as it should be
    This is very important to me since I used above command line in SCCM 2012 R2 to allow user to uninstall Office 2013 by itself via Software Center. When this failed I tried locally but the error was the same. This should have been trivial task - silent uninstallation
    using .xml file. It is not a rocket science. I am very angry because losing time for something like this is unacceptable for system engineers working with SCCM 2012 R2.

    Hi,
    This error might occurs due to lots of reasons. Where is the installation file stored? If it's stored on a network share, please copy it to your local disk, and then manually run the command again. This way, we'll see if the installation file is the
    problem.
    If issue persists in this case, then this generally means that something wrong with the installation file. Please try to redownload it and then try again.
    Please also make sure that you're executing the command with elevated privileges (run as administrator).
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Issue in Custom Blog site definition based on SharePoint 2010 blog site definition after migrating the sites to SharePoint 2013 and site collection upgrade

    I have created a custom blog site definition using SharePoint 2010 blog site definition with Configuration ID 31 in onet.xml (new value). This was working fine for SharePoint 2010.
    We created new SharePoint 2013 farm and deployed the all Custom solutions in
    14/15 folders. After migrating the sites to SharePoint 2013 using Content DB approach, site created previously using my custom definition are working fine.
    But after running site collection upgrade these sites stop working. When I post a comment then comments not getting listed on post detail page. However comments are getting added to Comments List but
    PostTitle column  of Comment is not getting populated.
    Also, when we create a new site in SharePoint 2013 using my custom blog template then that is also not getting provisioned.  default.aspx and look-up between post and comment list are not working.
    If any one has faced such issue then please share your findings and any solution to fix this.
    Thanks in Advance :)

    Hi ,
    According to your description, my understanding is that the blog based on custom blog site definition didn’t work correctly after migrating custom blog site definition to SharePoint 2013.
    If you customized the Onet.xml file in a previous version's site definition, you should modify some sections in the file to work in the current version, like  <BaseTypes> and  <ListTemplate>  etc. More information, please refer
    to the link below:
    http://msdn.microsoft.com/en-us/library/office/aa543837(v=office.14).aspx
    For that the PostTitle column  of Comment is not getting populated, please try to modify the view, then compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • HT3887 how do i fix line through bluetooth on macbook pro

    how do i fix line through bluetooth on macbook pro

    Howdy tayden44,
    If you are having an issue with a jagged line throught the bluetooth icon in your menu bar, you should restart your Mac. If the icon does not change, disconnect all USB devices and restart again. See this article for reference -
    Wireless input devices: Bluetooth frequently asked questions - Apple Support
    In particular the section titled What do the icons on the Bluetooth menu bar mean?
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • When in Safari, I try to text the link in the address bar to a contact through the link at th ebottom of safari and it never goes to th econtact and the message is lost.  Any fix here or is it a bug in 7.0.2?

    When in Safari, I try to text the link in the address bar to a contact through the link at th ebottom of safari and it never goes to th econtact and the message is lost.  Any fix here or is it a bug in 7.0.2?
    Re Create the task:
    1. Open Safari
    2. Go to the desired website/address
    3. Click the send icon at the bottom (Square with arrow pointed up)
    4. Click Message
    5. Add contact in "To:" line
    6. Hit send
    It locks up and lags here on me and the message never shows up at the contacts phone/imessage/etc.

    Hi,
    /Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
    Move the Safari app from the Desktop to the Applications folder.
    Restart your Mac.
    That's why you see this:
    When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
    After your restart your Mac, click the Apple  menu (top left in your screen) then click:  Software Update ...
    Carolyn  

  • HT2506 hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

    hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

    Hi,
    The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
    tell application "Microsoft Word" to close every document whose name begins with "book"
    The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
    So, changing one line ought to do it:
    close document incrementvalue -- instead of "close document"
    But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
    Because of this, if you want to do it in a repeat loop, you have to work backwards:
    tell application "Microsoft Word"
      set doc_count to count documents
      repeat with x from doc_count to 1 by -1
      if name of document x begins with "book" then close document x
      end repeat
    end tell
    Hope this helps.

  • [svn:fx-4.0.0] 13535: Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging .

    Revision: 13535
    Revision: 13535
    Author:   [email protected]
    Date:     2010-01-15 14:45:38 -0800 (Fri, 15 Jan 2010)
    Log Message:
    Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging.
    We've got a widespread problem with line-endings (\r\n vs \n vs \r) because not all our files have svn:eol-style set to "native". (With this setting, the line endings are adjusted for the platform that you check out code onto. Without it, you can end up with all-Mac line endings on a Windows machine, WindowsMacUnix line endings on a Mac, etc. The goal is all-Win on Win, all-Mac on Mac, etc.)
    For schedule reasons, we've decided to minimize risk by fixing only AS and MXML files in frameworks/projects that contribute to our SWCs, because here line-ending problems can throw off line numbers and the debugger doesn't step through the right lines of code.
    You can't set svn:eol-style to "native" unless the line endings are already correct for your platform. Since I'm on Windows, I wrote a script to find a fix the files that had any \n or \n line endings. The files now have \r\n.
    QE notes: None
    Doc notes: None
    Bugs: SDK-24966
    Reviewer: Pete
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24966
    Modified Paths:
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/IDeferredContentOwner.a s
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/ISelectableList.as
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/LayoutElementUIComponen tUtils.as
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/geom/CompoundTransform.as
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/geom/TransformOffsets.as
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/skins/halo/WindowBackground. as
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/utils/MatrixUtil.as
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/utils/OnDemandEventDispatche r.as
        flex/sdk/branches/4.0.0/frameworks/projects/osmf/src/org/osmf/media/MediaFactory.as
        flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/HTTPMultiService.as
        flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/Operation.as
        flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPMultiService.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/ButtonBar.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/DropDownList.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/HSlider.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/Panel.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/PopUpAnchor.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/Scroller.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/mediaClasses/Volum eBar.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Dro pDownController.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Dro pDownListBase.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Scr ollerLayout.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Sli derBase.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/AnimateTransform.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/supportClasses/Animat eTransformInstance.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/supportClasses/MoveIn stance.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/events/SkinPartEvent.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/skins/spark/HighlightBitmapCa ptureSkin.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/skins/spark/ScrollerSkin.mxml
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/styles/metadata/AdvancedInher itingTextStyles.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/styles/metadata/AdvancedNonIn heritingTextStyles.as
        flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/utils/LabelUtil.as
        flex/sdk/branches/4.0.0/frameworks/projects/wireframe/src/spark/skins/wireframe/NumericSt epperTextInputSkin.mxml

    Hi there,
    I follow the help from this post
    How to handle line break embeded inside CSV column
    Not a perfect way, but it is accepted in my case.
    Cheers,

  • HT1222 Ipad2 losses cell connection now that iOS 8 was installed.  Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

    Ipad2 losses cell connection now that iOS 8 was installed.  Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

    Hey everyone-
    Im in the same boat, started a thread . My hands free system worked fine with iOS 8 out of the box new iphone 6. Did the update this morning and i can stream music perfectly fine however i cannot make or receive calls through hands free system.
    I have not tried resetting the settings like most people indicate is working. I feel like I shouldn't have to reset anything, even less mess with settings with an update coming from apple. it should "Just Work"
    Some people who reset said it works for a few hours, other say it don't work, and I don't know what I should do.
    Car: Hyundai Sonata 2014
    NOTE: I was able to replicate the issue in my wifes Hyunday Elentra 2013.
    This is how I know its not a defect with the BT in my car.

Maybe you are looking for

  • I cannot find my external hard drive

    First let me start by saying I am no geek! I have a G technology hard drive and when I plug it to my new MacBook Pro it is nowhere to be seen. This summer i had to change my MacBook Pro. I transfered all my files to an external Hard drive and then pu

  • I can make calls with my MBP on FaceTime but i can't receive calls!!

    Hi I have a problem, I have a MBP with OS X Yosemite and an Iphone 6+ with IOS 8.1 . i set them to use handoff and FaceTime to call and receive calls from my Mac. IMessage works great, Handoff too, i can call using FaceTime,  everything works good bu

  • Facetime keeps saying 'error occurred during activation, please try again' so I cannot open facetime :(

    Facetime will not activate on my phone. 'error occured during activiation please try again' keeps popping up.  I have tried creating a second apple user and id and the same message continues to pop up. My kids and husband can all do facetime from our

  • Payment made

    My payment was made three days back and still the account shows zero minutes...seems quite unfair and unreasonable. Can Skype help?

  • Solaris 10 - init -s

    Hello, Have a SunBlade2000 running Solaris 10. When trying to enter single-user mode via "init -s", get nothing but a blank screen. Any ideas would be appreciated. Thanks, Nick